MOST of the technical term on KR150 (kawasaki Kips)

[adesmond2]

desmond. can i ask you one question what is the size of the bulb for krr headlight?

 

size? i only know it's H4.. i dunno what size wor.. lolx..

[adesmond2]

double post.. =_=""

Edited March 1, 2011 by adesmond2

[elsonojh]

size? i only know it's H4.. i dunno what size wor.. lolx..

 

then if i change will it melt my headlight casing?

[elsonojh]

size? i only know it's H4.. i dunno what size wor.. lolx..

 

i'm currently looking for this bulb 12v 18 /5w . dont you know where can i find. cause i need it for my side light cause i'm going for inspection.

[adesmond2]

then if i change will it melt my headlight casing?

 

err.. wun bah.. but all these... i cannot "guarranty" you have to check with bike shop..

 

i'm currently looking for this bulb 12v 18 /5w . dont you know where can i find. cause i need it for my side light cause i'm going for inspection.

 

go to bike shop.. no need to find.. tell them you going for inspection and normally they will check for you..

[ter0618]

my bike break down in expreeway yesterday.

 

full overhaul in sg so expensive meh?

min $800 and not all wear and tear parts changed!!!

 

later go work shop to verify what needs to change...

[niteblade]

my bike break down in expreeway yesterday.

 

full overhaul in sg so expensive meh?

min $800 and not all wear and tear parts changed!!!

 

later go work shop to verify what needs to change...

 

eh you know what parts spoilt? i dont think its so expensive... piston jammed? conrod spoil? maybe electrical system got some part disconnected?

[11ikaz11]

bro, kr empty 'stomach' legal? can pass inspection?

[adesmond2]

my bike break down in expreeway yesterday.

 

full overhaul in sg so expensive meh?

min $800 and not all wear and tear parts changed!!!

 

later go work shop to verify what needs to change...

 

checked!! high possible being chop liaoz..

 

eh you know what parts spoilt? i dont think its so expensive... piston jammed? conrod spoil? maybe electrical system got some part disconnected?

 

yeah lor.. $800 lei.. that's the price for entire gear overhaul + new block!! haixx..

 

bro, kr empty 'stomach' legal? can pass inspection?

 

*50/50, normally ok.. cause 80% of the kr stomach open liaoz.. lolx..

[izmirshah]

hello guys. where is the best shop to buy a good, second hand kr? planet at ubi? S1 at ubi? AS phoon? there are so many shops around. so i need your suggestion! thank you!

[adesmond2]

hello guys. where is the best shop to buy a good, second hand kr? planet at ubi? S1 at ubi? AS phoon? there are so many shops around. so i need your suggestion! thank you!

 

ask planet at ubi and try to "ask" ah chiong to look for you.. nice guy but long waiting list.. lolx..

[elsonojh]

err.. wun bah.. but all these... i cannot "guarranty" you have to check with bike shop..

 

 

 

go to bike shop.. no need to find.. tell them you going for inspection and normally they will check for you..

 

bro, if i go for inspection will they check my Tyre fiction?

[Eno]

bro, if i go for inspection will they check my Tyre fiction?

 

Yes. They visually check this parts:

 

1. Disc Brake (if u using oversize. 50/50.)

2. Racing Footrest (also 50/50)

3. Tyres Thread

4. Licence plate color and size

5. Signal lights & horn

6. Smoke emission & sound

7. Any non-standard items. Like my tailboard for example.

[elsonojh]

Yes. They visually check this parts:

 

1. Disc Brake (if u using oversize. 50/50.)

2. Racing Footrest (also 50/50)

3. Tyres Thread

4. Licence plate color and size

5. Signal lights & horn

6. Smoke emission & sound

7. Any non-standard items. Like my tailboard for example.

 

if my tyres fiction is about to finish but board line la. you think can pass anot?

[adesmond2]

if my tyres fiction is about to finish but board line la. you think can pass anot?

 

as long not say, cannot see line.. should be ok..

[Joe_Boxer]

Peace to all Krr rider

-i've got a ques to ask regarding the "RIS" bottle which locate inside of the left fairing and frm tat bottle, thres tube connects to centre part of our carb manifold....

So wat is tat really do? I try to take out tat bottle bt it seems like empty inside. So anyone can tell me wats the use of it? Older version kr using HSAS bottle bt newer version mostly are using RIS.. Hmmm !

Edited March 12, 2011 by Joe_Boxer

[Sharkboy]

Hi, would like to ask, what is the suitable fast throttle that can be fitted with kr?

[adesmond2]

Peace to all Krr rider

-i've got a ques to ask regarding the "RIS" bottle which locate inside of the left fairing and frm tat bottle, thres tube connects to centre part of our carb manifold....

So wat is tat really do? I try to take out tat bottle bt it seems like empty inside. So anyone can tell me wats the use of it? Older version kr using HSAS bottle bt newer version mostly are using RIS.. Hmmm !

 

we called that as boost bottle if you refer to aftermarket.. it's something that absorb air when you release throttle and give out more air when you rev..

 

Hi, would like to ask, what is the suitable fast throttle that can be fitted with kr?

 

actually alot.. must see which brand you like..

[Sharkboy]

actually alot.. must see which brand you like..

 

Actually, ive bought daytona fast throttle liao. Went to bike shop near my area and was told that the throttle cant fit as it dont have the switch button and the small white plastic found at the end of the wire, it is to insert inside the carb. Could anyone help on this?

[Joe_Boxer]

Ok, understood.. thanks

[adesmond2]

actually alot.. must see which brand you like..

 

Actually, ive bought daytona fast throttle liao. Went to bike shop near my area and was told that the throttle cant fit as it dont have the switch button and the small white plastic found at the end of the wire, it is to insert inside the carb. Could anyone help on this?

 

hmmm... but.. before you buy, did you ask if this daytona can fit onto kr? because i've asked around, there's alot that's only suitable for class 2 or 2A..

*for your information -> you can mod the throttle if you know how to do it.. or bring it along to MY and ask the bike shop that you went often to ask..

I need the full pictures or if possible the throttle itself to see if it can be mod..

 

Ok, understood.. thanks

 

welcome bro..

[Pandoras Kitten 3]

we called that as boost bottle if you refer to aftermarket.. it's something that absorb air when you release throttle and give out more air when you rev.. http://www.singaporebikes.com/forums/showthread.php/images/smilies/smile.png

 

Sounds like an air bleed device from the description.

[Sharkboy]

Actually, ive bought daytona fast throttle liao. Went to bike shop near my area and was told that the throttle cant fit as it dont have the switch button and the small white plastic found at the end of the wire, it is to insert inside the carb. Could anyone help on this?

 

hmmm... but.. before you buy, did you ask if this daytona can fit onto kr? because i've asked around, there's alot that's only suitable for class 2 or 2A..

*for your information -> you can mod the throttle if you know how to do it.. or bring it along to MY and ask the bike shop that you went often to ask..

I need the full pictures or if possible the throttle itself to see if it can be mod..

 

I've asked the seller and he said that the throttle could fit onto kr just like his friend did. Will post the pic asap.

[Sharkboy]

Desmond, here's a pic of how my daytona fast throttle looks like althoguh i just copied the image from another link via this website.

[adesmond2]

Desmond, here's a pic of how my daytona fast throttle looks like althoguh i just copied the image from another link via this website.

 

how about the "end" cables? the throttle is ok.. should be able to "squeeze" or cut or etc.. but the main thing is the cables that came with it?