[Group] YAMAHA Fazer

[maxxmadness]

someone washed bike again, now raining and we are going kukup...

[y2kredbull]

i dunno if '06 same as mine. for mine, first set your display to odometer or tachometer, den push the "reset" nutton for at least 2 sec. in this case, my clock would change to air intake temp. hope it helps..

 

 

err...actually i want to fix up the power chip i bought off e-bay.The IAT sensor suppose to be under the tank.Just want to confirm exact location.

[DeusExMachina]

U mean Seow Ah Beng? I'd rather blame Kenny Nah!

 

You are korreck!

 

Go JB near Holiday Plaza there and visit the car wash run by Kenny Nah Boo Wei and his partner Chee Baikia.

[X-Fazed]

You are korreck!

 

Go JB near Holiday Plaza there and visit the car wash run by Kenny Nah Boo Wei and his partner Chee Baikia.

 

Muahahahaha!!!!

 

Then go across for teh tarik at Juboh Bin Berair

[Speedpass]

Muahahahaha!!!!

 

Then go across for teh tarik at Juboh Bin Berair

 

Wah , i tot u went on the trip wif the rest , if not , i jio u for lks at CV , was at loyang earlier .

[racingter]

Wah , i tot u went on the trip wif the rest , if not , i jio u for lks at CV , was at loyang earlier .

 

 

i am around also leh...

[Speedpass]

i am around also leh...

Wah , tot u sure go wif them one .

[DeusExMachina]

No one chio me?

 

 

[Speedpass]

No one chio me?

 

 

 

 

U stay where ? Next time jio u lah .

[X-Fazed]

Wah , i tot u went on the trip wif the rest , if not , i jio u for lks at CV , was at loyang earlier .

 

Didn't go cos I missed the deadline to apply exit permit from MHA.

[etky85]

err...actually i want to fix up the power chip i bought off e-bay.The IAT sensor suppose to be under the tank.Just want to confirm exact location.

 

oh.. u mean the sensor? sorry.. i tot u saying how to set it in the display.. paiseh paiseh..

[R_yan_2]

err...actually i want to fix up the power chip i bought off e-bay.The IAT sensor suppose to be under the tank.Just want to confirm exact location.

 

power chipo_O NOS eh?

[y2kredbull]

oh.. u mean the sensor? sorry.. i tot u saying how to set it in the display.. paiseh paiseh..

 

Its ok bro.

[miss]

Hello.. sorry to interrupt your conversation again ya...

 

But why does my meter area makes a zzzznnnnnngggg kind of noise?

Sometimes have, sometimes dun have... I'm not sure if it has something to do with me not turning on the headlights...

 

Something i should worry about?

[R_yan_2]

maybe der is a mosquito inside?

[miss]

hahaha... must be a reallly bigggg mosquito.. Sound is pretty loud...

[R_yan_2]

hahaha... must be a reallly bigggg mosquito.. Sound is pretty loud...

 

hehehehe. . . i think if from meter its nothing wrong larr . . unless when u ride got funny feeling then better go check up

[miss]

Hmmmm... Ok... Will see how it goes the next few days..if the sound persist, think i'm going to have it checked out...

 

Just wanted to check if this is a problem that needs immediate attention Thank u..

[Constructicon]

Hi fellow fazer riders,

 

I got 2 questions which I need help on. (again)

 

1)

When u put ur bike on centre stand and spin the tyres, is there a tiny,weeny "zzzzzssss' sound? Like it seems to be brushing against something?

I put it to neutral and the tyre spins ever so slightly, so I presume the brake disc is not pressing against brake pads. (Not Brake piston jammed) But I did notice that one side of the brake pad is flatter than the other.

Do u ppl encounter the same sound also?

 

2) The right mirror vibrates more than the left. It not that bad lah, but the difference is when I clutch in, I can see the behind car's number plate. When i engage the cluch, the mirror vibrates and cant see the car's details.

Overall, the vibrations of my bike is still acceptable, just that there's a irritiating buzzing sound when the revs get higher at lower gears. Comes and goes.

 

I riding a Gen 1 FZS1000.

 

Thanks!

[racingter]

Wah , tot u sure go wif them one .

 

bo leh...working mahz:dot:

[LollyPoP]

Hi fellow fazer riders,

 

I got 2 questions which I need help on. (again)

 

1)

When u put ur bike on centre stand and spin the tyres, is there a tiny,weeny "zzzzzssss' sound? Like it seems to be brushing against something?

I put it to neutral and the tyre spins ever so slightly, so I presume the brake disc is not pressing against brake pads. (Not Brake piston jammed) But I did notice that one side of the brake pad is flatter than the other.

Do u ppl encounter the same sound also?

 

2) The right mirror vibrates more than the left. It not that bad lah, but the difference is when I clutch in, I can see the behind car's number plate. When i engage the cluch, the mirror vibrates and cant see the car's details.

Overall, the vibrations of my bike is still acceptable, just that there's a irritiating buzzing sound when the revs get higher at lower gears. Comes and goes.

 

I riding a Gen 1 FZS1000.

 

Thanks!

 

 

 

my rear doesn't seems to roll-on freely when put to main-stand, but the brake disc is not brushing against the pads either.

 

for yr mirrors case, try tightening the screws. mayb they're loose.

[DeusExMachina]

my rear doesn't seems to roll-on freely when put to main-stand, but the brake disc is not brushing against the pads either.

 

 

Might be your wheel bearings.

 

Try moving/shaking your wheel abt the axle, see if there's freeplay.

[DeusExMachina]

 

1)

When u put ur bike on centre stand and spin the tyres, is there a tiny,weeny "zzzzzssss' sound? Like it seems to be brushing against something?

I put it to neutral and the tyre spins ever so slightly, so I presume the brake disc is not pressing against brake pads. (Not Brake piston jammed) But I did notice that one side of the brake pad is flatter than the other.

Do u ppl encounter the same sound also?

 

The brake pads almost always lightly contacts the disc. When you release your brake lever, there is no spring or opposing force to totally unclamp the caliper/pads from the disc, so it just reverts out to the minimal contact position.

 

But don't worry too much. The sintered pads are made of a much softer material and will not eat into the discs.

[y0s_bikey]

Hello.. sorry to interrupt your conversation again ya...

 

But why does my meter area makes a zzzznnnnnngggg kind of noise?

Sometimes have, sometimes dun have... I'm not sure if it has something to do with me not turning on the headlights...

 

Something i should worry about?

 

dun worry i have checked before... its the fuel pump... if u dun hear dat... den big trouble... cos fuel pump not working anymore...

[etwy]

hi everyone! anyone tried to fix up the IU unit under the rear seat compartment? Will the gantry be able to detect the IU?