[Group] YAMAHA Fazer

[putton]

A very BIG HELLO to all fazer rider...

:cheeky:

got a question to ask...

hope u guys can help me out...

 

i am riding a Gen 1 Fz 1...

and i ride this bike only for a few months...

the pervious owner changed the handle bar to a fat bar and its is vibrating alot when travelling on the road... be it fast or slow... is there anyway to stop the vibration or maybe reduce it??

i have added a pair of motivation balancers to the handle bar but not very useful..

 

MY HANDS are always numb at the end of the journey when i ride frm my hse to work!!!!

 

PCC also not so tired...

thanks alot...

[LollyPoP]

A very BIG HELLO to all fazer rider...

:cheeky:

got a question to ask...

hope u guys can help me out...

 

actually i ride this bike for not very long...

the pervious owner changed the handle bar to a fat bar and its is vibrating alot when travelling on the road... be it fast or slow... is there anyway to stop the vibration or maybe reduce it??

i have added a pair of motivation balancers to the handle bar but not very useful..

 

MY HANDS are always numb at the end of the journey when i ride frm my hse to work!!!!

 

PCC also not so tired...

thanks alot...

 

 

u're on a 6 or 1?

try tightening all screws.

i do have a spare 07 fz6 handle bar, u can have it cheap if u need the stock one.

[putton]

u're on a 6 or 1?

try tightening all screws.

i do have a spare 07 fz6 handle bar, u can have it cheap if u need the stock one.

 

thanks bro...

but i riding a Gen1 Fz1 03 model...

think cannot fit...

[Constructicon]

thanks bro...

but i riding a Gen1 Fz1 03 model...

think cannot fit...

 

Hi, I also riding Gen 1 FZS1000 03 model.

 

The vibrations starts to go from 3500rpm to ard 4500 rpm.

If you rev over the 4500, things will smooth out.

 

I dun know why also, but its very irritating. If you felt your fairings, the buzz is also there, but the worst is the handle bar, some kind of high freqeuency vibrations.

 

The prob is at less than 3500 rpm, the bike is barely making any real power, just puttering along.

But more than 500rpm, will overshoot the speed limit very fast.

 

Any1 riding the same model FZS1000? Wats ur cruising speed and rpm on highway?

 

[Constructicon]

Nobody mentioned anything about their pick of tyres?

What would most of you go for?

1000cc or sports tourer category?

price diff is abt 20%, might as well get the best?

 

I wonder if the prices listed are in S$?

And where from?

 

Eh bro, basically I compiled 3 month issues of the BIKE mag, summarised the test results and put it up here .

Cos to put every thing word for word will take me hours.

 

Personally, I would take the Sports Touring option. Bcos my main criteria is tyre life.

My current BT-014 is good, but I dun like it when it rains. Also, I am a 'unsporty' rider, and the current tyres' centre is running botak, while the sides are real thick,.

 

So to me, it;'s a waste of $$$ to buy the more exp sports tyres w/o utilising them the way they are designed, and also not to my main criteria of tyre life.

[LollyPoP]

thanks bro...

but i riding a Gen1 Fz1 03 model...

think cannot fit...

 

i'm using a 06 FZ1 handle bar on my 07 FZ6.

[Yatz86]

Good luck for your TP:goodluck: ...remember to check "here and there" when you riding

 

lol, check what thing...wa **** i 4get:p

[Yatz86]

Eh bro, basically I compiled 3 month issues of the BIKE mag, summarised the test results and put it up here .

Cos to put every thing word for word will take me hours.

 

Personally, I would take the Sports Touring option. Bcos my main criteria is tyre life.

My current BT-014 is good, but I dun like it when it rains. Also, I am a 'unsporty' rider, and the current tyres' centre is running botak, while the sides are real thick,.

 

So to me, it;'s a waste of $$$ to buy the more exp sports tyres w/o utilising them the way they are designed, and also not to my main criteria of tyre life.

 

 

yeap agree sometimes just buy the average will do...no need to go untill those xpensive tyres....good tyre info btw:shades:

[putton]

Hi, I also riding Gen 1 FZS1000 03 model.

 

The vibrations starts to go from 3500rpm to ard 4500 rpm.

If you rev over the 4500, things will smooth out.

 

I dun know why also, but its very irritating. If you felt your fairings, the buzz is also there, but the worst is the handle bar, some kind of high freqeuency vibrations.

 

The prob is at less than 3500 rpm, the bike is barely making any real power, just puttering along.

But more than 500rpm, will overshoot the speed limit very fast.

 

Any1 riding the same model FZS1000? Wats ur cruising speed and rpm on highway?

 

 

yup... i am facing the same problem...

i am riding the same model...

3000rpm, its vibrates the most... really irratating!!!!

i always cruising at 100km/h at near 4000rpm...

and i am using 180 tire...

[putton]

i'm using a 06 FZ1 handle bar on my 07 FZ6.

 

really!!!!

maybe can arrange a time to meet up and see the handle bar..

but do u have the clamp??

cause i dont have the orignal one...

thanks...

do drop me a PM...

[farish]

i'm using a 06 FZ1 handle bar on my 07 FZ6.

 

what is the difference in feel, handling?

 

My fren bought a fazer1 handle bar for his street fighter project but still on, hold..and .the handle bar in my house...a bit tempted to mess around...

[Pplater]

wah.. my FC since i got the bike is like onli 19-20km/litre onli leh.

 

i have an affinity for consumption of 22km/l.. i dunno why also... all through the years i change bikes, it always remained the same.

 

nsr sp 22km/l

super 4 spec 1 22km/l

fz6 04 22km/l

 

dun ask me why...

[fir_chan]

Good morning everyone!!!

 

T_IF!!!

 

Its friday! Friday!!!............ :bouncefire:

[CMYRS]

The Diablo Rosso is considered a Sport tyre? Or sport touring tyre?

 

Looks mighty expensive if it's just a mere sport touring tyre....

 

 

Personally I'll go with sport tyres. More grip is always better. I rather change tyres than change fairings or other bits.

 

 

Exactly my same thoughts.

 

Im not concerned about wear, grip is no.1 priority.

 

the M3 has been out for awhile, I wonder if the Rosso being newer has improvements worth $15 more?

 

Anyone with personal feedback?

[CKC]

A very BIG HELLO to all fazer rider...

:cheeky:

got a question to ask...

hope u guys can help me out...

 

i am riding a Gen 1 Fz 1...

and i ride this bike only for a few months...

the pervious owner changed the handle bar to a fat bar and its is vibrating alot when travelling on the road... be it fast or slow... is there anyway to stop the vibration or maybe reduce it??

i have added a pair of motivation balancers to the handle bar but not very useful..

 

MY HANDS are always numb at the end of the journey when i ride frm my hse to work!!!!

 

PCC also not so tired...

thanks alot...

 

 

Did the previous owner use any bar-ends(balancer) on the fat bar?

a heavy bar end will eat-up a lot of vibrations cause by the engine

fat bar are light and strong feel better in control for some but they are normally mean for dirt bikes not street nor sport

best is to change back to orginal handle with orginal yamaha bar ends (heavy so not so much vibrations) will cure a lot.

(motivation sell those stainless steel type which I think is best as all my previous bikes is fitted with them and even my kup now is using-just my 2 cents)

[fir_chan]

Did the previous owner use any bar-ends(balancer) on the fat bar?

a heavy bar end will eat-up a lot of vibrations cause by the engine

fat bar are light and strong feel better in control for some but they are normally mean for dirt bikes not street nor sport

best is to change back to orginal handle with orginal yamaha bar ends (heavy so not so much vibrations) will cure a lot.

(motivation sell those stainless steel type which I think is best as all my previous bikes is fitted with them and even my kup now is using-just my 2 cents)

 

Ahhh.......

 

Handlebar guru has spoken...............!!!

 

Think there is no one in this thread dare say he/she is better at handlebar tips than CKC!!!

 

Thumbs up!! :thumb:

[HeE HoR]

maybe u can see this thread http://www.singaporebikes.com/forums/showthread.php?t=184941

 

 

Thanks peep......

[Xgrind]

Good morning all,

 

Latest update:

 

We have 10 interested dudes in the MO. 2 more to go... hopefully more to get better discounts

[DeusExMachina]

Did the previous owner use any bar-ends(balancer) on the fat bar?

a heavy bar end will eat-up a lot of vibrations cause by the engine

fat bar are light and strong feel better in control for some but they are normally mean for dirt bikes not street nor sport

best is to change back to orginal handle with orginal yamaha bar ends (heavy so not so much vibrations) will cure a lot.

(motivation sell those stainless steel type which I think is best as all my previous bikes is fitted with them and even my kup now is using-just my 2 cents)

 

Ahhh.......

 

Handlebar guru has spoken...............!!!

 

 

Any effect if you put/wrap a rubber sheet as a washer/grommet at the handlebar clamp to act as a vibration damper?

[LollyPoP]

really!!!!

maybe can arrange a time to meet up and see the handle bar..

but do u have the clamp??

cause i dont have the orignal one...

thanks...

do drop me a PM...

 

oh... i dun have the clamp.

[LollyPoP]

what is the difference in feel, handling?

 

My fren bought a fazer1 handle bar for his street fighter project but still on, hold..and .the handle bar in my house...a bit tempted to mess around...

 

 

hmm.... more sports feeling.

[LollyPoP]

i have an affinity for consumption of 22km/l.. i dunno why also... all through the years i change bikes, it always remained the same.

 

nsr sp 22km/l

super 4 spec 1 22km/l

fz6 04 22km/l

 

dun ask me why...

 

 

WHY ah???

 

[DeusExMachina]

i have an affinity for consumption of 22km/l.. i dunno why also... all through the years i change bikes, it always remained the same.

 

nsr sp 22km/l

super 4 spec 1 22km/l

fz6 04 22km/l

 

dun ask me why...

 

 

Go and get a Bajaj Pulsar.

 

I betcha u won't find it so amusing if it coughs up a 22km/l mileage.

[fir_chan]

http://www.channelnewsasia.com/stories/singaporelocalnews/view/368334/1/.html

 

All foreigners entering M'sia must fill in immigration cards

By Chan Eu Imm, Channel NewsAsia | Posted: 15 August 2008 1444 hrs

 

 

 

SINGAPORE: All foreigners entering Malaysia must fill in immigration embarkation cards starting Friday. This includes Singaporeans who're entering Malaysia via the Causeway and Second Link.

 

The move is applicable to all entry points into the country after the cards were re-introduced as part of enhanced security measures.

 

The Malaysian government did away with the process on January 20, but re-instated it.

 

Customs officials have stationed an additional 23 staff at the Causeway to help distribute the cards. But it remains to be seen if the new ruling will significantly slow down traffic.

 

A new version of the card is expected by mid-September, which will include a requirement for visitors to clearly state their address while in Malaysia. - CNA/vm

[LollyPoP]

yah.. i kana the white card.