[Group] YAMAHA Fazer

[putton]

hmmm... bro, i suppose ur ride is a fz1 s1 right? if this is so, i'm sorry to say tht i dun really knows the pts for fz1 s1 just in case it is not the same as my fz6 s2. perhaps the seniors could advise?

 

i believe that grounding is mainly to prevent all those electric applications from current leakage and now allowing short circuit or even electrocuted. a ground wire provides a much lesser path to ground so that electricity will take the easiest path or resistance without going through you. perhaps there might have someone 2nd to that...

 

Thanks bro.

 

Frame (steel) and engine. Good enuff.

 

Frame?? Engine?? Then how about starter coil, rectifier, headlight???

Cause when i do grounding for my pervious S4, i did all these pt...

Can do??

 

And for engine nd frame, where to take the pt... Any pt can??? Sorry for the noob question... Cause although i had been riding my FZ1 for almost a year, dont really go and figure out the things for this bike, until nw...

 

Many thanks again...

[Naked1]

bro never go back reservist ar? long time no c u liao

 

Hahahaa..downgraded excuse ippt.

[racingter]

beng mi maybe cant go for ur wedding convey cos working till 2am, scare cant meet u at 730am.......

 

 

 

Try lar...so many fazers bros and sis going..missing u out will be of a pity

[maxxmadness]

Try lar...so many fazers bros and sis going..missing u out will be of a pity

 

i think it's more like finished 2am then go "cheong" thai disco with his colleagues...dont forget his colleagues also my colleagues, so i know...D

[katana777]

dun think i able to chiong from 2am-6am...

old liao leh

[xiao_mashi]

pichudot : bro, check wif you... Waz brand and size and price of your rear side box? thx ar...

[pichudot]

pichudot : bro, check wif you... Waz brand and size and price of your rear side box? thx ar...

 

yo eric... err my side panniers r of h&b junior flash, 40L... got it at around $950...

[stwb1981]

Finally ....

all my parts arrived....

juz fixed up my Front & Rear Springs & Plot Swage hoses....

 

Hoses are of gd built quality.....

very satisfied....

 

Front & Rear Springs do HELP ALOT!!!!

Esp Rear shock spring

Currently preload is at 5 & i find it abit to hard (I quite a heavyweight)

standard stock spring preload fr fazer owner manual is 6

Tink i will adjust to 4.....

for the dampering etc tink will find a better qualified mech or i do my self.....

the mech tat did my stuff....

hmm nt proficient enuf!!!!

 

Front fork feel is abit soft....

tink will add more fork oil.....

 

overall quite satified wif the products....

waitied for abt 6hrs+-

juz tat aft install pls go to yr choice mech elsewhere to do a proper setup or tuning or self tune wich is quite easy but too lazy lah...

lol...

 

Cheers!!!

[farish]

i think it's more like finished 2am then go "cheong" thai disco with his colleagues...dont forget his colleagues also my colleagues, so i know...D

 

Talk about thai disco..where is club nana? i read somewhere that it is somewhere in clarke quay at central?? My friends and 1 could not find

[Intruder]

Finally ....

all my parts arrived....

juz fixed up my Front & Rear Springs & Plot Swage hoses....

 

Hoses are of gd built quality.....

very satisfied....

 

Front & Rear Springs do HELP ALOT!!!!

Esp Rear shock spring

Currently preload is at 5 & i find it abit to hard (I quite a heavyweight)

standard stock spring preload fr fazer owner manual is 6

Tink i will adjust to 4.....

for the dampering etc tink will find a better qualified mech or i do my self.....

the mech tat did my stuff....

hmm nt proficient enuf!!!!

 

Front fork feel is abit soft....

tink will add more fork oil.....

 

overall quite satified wif the products....

waitied for abt 6hrs+-

juz tat aft install pls go to yr choice mech elsewhere to do a proper setup or tuning or self tune wich is quite easy but too lazy lah...

lol...

 

Cheers!!!

 

You changed the springs for your shocks? Which make you are using? HyperPro?

 

Try RaceTech gold Valve for the shocks, will improve the hardness for the fronts and response.

[racingter]

i think it's more like finished 2am then go "cheong" thai disco with his colleagues...dont forget his colleagues also my colleagues, so i know...D

 

 

wah ..serious boh?

[xiao_mashi]

yo eric... err my side panniers r of h&b junior flash, 40L... got it at around $950...

 

oh~ ok.... thx... where you get it from?

[stwb1981]

You changed the springs for your shocks? Which make you are using? HyperPro?

 

Try RaceTech gold Valve for the shocks, will improve the hardness for the fronts and response.

 

Sorry mate....

isit race tech or k tech...?

u mean for the front fork valve??

fr motoworld oso...?

tink dun dare to get too "advance stuff" fr there....

as said mech proficiency is .....

mayb Muji himself or the ah pek mech (sorry dun noe his name) do the job....

then i will consider getting it ..lol

 

yup currently using hyperpro Font fork springs &Rear shock absober spring

...

[maxxmadness]

wah ..serious boh?

 

you seen his reply? he is not denying, he only states that he cant party from 2am to 6am..

 

dun think i able to chiong from 2am-6am...

old liao leh

 

so he may chiong until 5am...

[maxxmadness]

Talk about thai disco..where is club nana? i read somewhere that it is somewhere in clarke quay at central?? My friends and 1 could not find

 

hahah...you got the wrong person to ask...you should be asking either katana or prince of patong aka richard...

[pichudot]

oh~ ok.... thx... where you get it from?

 

i got it from chiap lee, 3+ mths ago... u could get it from m-technik or chiap lee...

[racingter]

you seen his reply? he is not denying, he only states that he cant party from 2am to 6am..

 

 

 

so he may chiong until 5am...

 

 

 

i can force him if he cant make it..

[racingter]

Date:18 JULY 2009 (Sat)

Time:7.00am - 1300 hrsMeet Up @ Hougang st 22 Blk 241 (0700 hrs) PLS DONT BE LATE.

Place:Hougang St22 - Hougang Ave 8

Re:Fazer wedding escort for racingter.

Pls Pm racingter your mobile number as a contact reference.

Dress code:Black polo t shirt with jeans

PLs take Note: NO TOP BOX and Pillon

Makan: LUNCH BUFFET IS PROVIDED (Confirmed @ 1130)

PLS bring along raincoat.

 

[FZ1S]

1. |a|ex|

2. Katana777

3. Dabonz (Marker1)

4. E.M.F

5. Xgrind

6. maxxmadness (Pointer)

7. Intruder

8. hairisg76

9. jason

10.Speedpass

11.Madcow1975

12.Rogerfz1

13.lighterz

14.Botzz

15.joos7er

 

 

[FZ1N]

1.Naked1 (Marker2)

2 Faigotten

3.Crossover

4.DeRick

 

 

 

[FZ6]

1. pichudot

2. ROyWong13 (Bike Sweeper)

3. Yatz86

4. sarasta

5. Ivan

6. farish

7. signboard

8. nedomar

 

[support Car]

1.Ronald (Bride car)

2.Potez (Car sweeper)

3.patrick

4.Laudrick

5.Debbie

 

 

 

 

 

Current Strength :27+5

Edited July 15, 2009 by racingter

[Brembo]

SPOT THE DIFFERENCE!

 

http://i33.photobucket.com/albums/d83/cyanhan/Fazer%20Related/spotthediff-1.jpg

[JoOs7eR]

SPOT THE DIFFERENCE!

 

http://i33.photobucket.com/albums/d83/cyanhan/Fazer%20Related/spotthediff-1.jpg

 

fork / bracket holding headlight / metal piece beside radiator. all diff color

 

Seat design is diff

 

speedo meter is diff too

Edited July 15, 2009 by JoOs7eR

[DeusExMachina]

SPOT THE DIFFERENCE!

 

http://i33.photobucket.com/albums/d83/cyanhan/Fazer%20Related/spotthediff-1.jpg

 

 

 

So what's this all about?

 

Did Yamaha cut costs on the FZ6?

[Intruder]

Sorry mate....

isit race tech or k tech...?

u mean for the front fork valve??

fr motoworld oso...?

tink dun dare to get too "advance stuff" fr there....

as said mech proficiency is .....

mayb Muji himself or the ah pek mech (sorry dun noe his name) do the job....

then i will consider getting it ..lol

 

yup currently using hyperpro Font fork springs &Rear shock absober spring

...

 

It RaceTech bro. I have heard of the goodness from my racing guru buddy. He was one of his kind. He would go for handling performance before he even rush for power curve on his FZ6. He did mentioned that FZ6 S2 suspension dun really up to the minimum requirement. So for this bike he go for the handling scope 1st.

 

Haha, he keep 'Poisoning' me to go for the valves mod, but for the nx few mths i am tie down with hard budget so LL no way to go for newer stuffs.

 

My bro mentioned about Teck Thye for the shock works, he was there and the work satisfy him. So i presume it must be good. For my bro is those that very stringent on how ppl handle his 'baby' & the after product.

 

Some RaceTech info only

[DeusExMachina]

Bro.

 

NONE of the stock Fazers have anything a trackgoer would consider "minimum handling performance"

 

FZ series bikes are road oriented. Even then, on the road, the suspensions can just barely make it only.

[Intruder]

SPOT THE DIFFERENCE!

 

http://i33.photobucket.com/albums/d83/cyanhan/Fazer%20Related/spotthediff-1.jpg

 

It's a blackout edition.

 

Swing arm design changed too.

 

But funny Japanese, you see the caliper piston screws...it's silver on the blackout and black screws caps on the silver.

Edited July 15, 2009 by Intruder

[Intruder]

Bro.

 

NONE of the stock Fazers have anything a trackgoer would consider "minimum handling performance"

 

FZ series bikes are road oriented. Even then, on the road, the suspensions can just barely make it only.

 

Agree. For track goers stock FZ's handling is nothing close to their requirement. Like i always say, if want to go track, get R1. FZ is milder but suffice to run along or over take other similar class.