[Group] DAELIM roadwin

[xishuo]

raden my fren's still getting license. but i can gurantee his sincerity. just a question before hand. how much are you selling ah?

 

my bike comes with a windshield. just that my cam cannot capture it properly

 

against stationary fall ok. high speed no. average speed only affect frame. but change frame better than change engine la ^_^

[xishuo]

oh yeah just topped my my fuel again.

 

my fc went to 36 this time round... maybe due to less stop and move situation? but i went on average to 60 to 70 kph.

[xishuo]

Hi guys. Morning. ^_^

 

when i clutch in and change gear rite? My gear sometimes like stuck. need to release clutch and open throttle before it fall into place...

 

is it cos its still not seasoned? can anythhing be done bout it? thx thx =)

[Satria]

Originally posted by xishuo@Apr 22 2006, 10:38 AM

Hi guys. Morning. ^_^

 

when i clutch in and change gear rite? My gear sometimes like stuck. need to release clutch and open throttle before it fall into place...

 

is it cos its still not seasoned? can anythhing be done bout it? thx thx =)

That happens when you shifting down is it? I get those too but only occasionally.. normally I just do the same as what you described..

[stsoh]

deleted...deleted.

Edited July 5, 2010 by stsoh

[xishuo]

yup satria, it happens during shifting down. glad that its nothing to do with me... haha...

 

but uncle, X5 is liquid cool one lei. thats what the salesperson told me. so should i still use vicos 50 one or 40 one? tyty

[stsoh]

deleted...deleted.

Edited July 5, 2010 by stsoh

[Satria]

Yup X5 is air cool..

 

Just put on a 2nd hand stainless steel header today (jack's perhaps?).. bike sounds more garang and louder a bit.. will see how it goes..

[xishuo]

ah ha... roger. thx for the explanation... now then i realise ya indeed there isn't an inlet for coolant... lol... still havent examine the anatomy of the bike...

 

btw, wats a stainless steel header and wat is it used for? sorry ah. just interested to know more about bikes...

[Satria]

Read a few pages behind and you will see illustrations by Uncle Soh about the header.. can't remember which page though..

[lostjackal]

Originally posted by Satria@Apr 22 2006, 03:27 PM

Yup X5 is air cool..

 

Just put on a 2nd hand stainless steel header today (jack's perhaps?).. bike sounds more garang and louder a bit.. will see how it goes..

Satria make sure u follow soh's welding method....unless u dun mind whacking everytime... u should notice that the bike cannot sustain throttling at 2k rpms...

 

so if u wanna save on f/c be sure not to change gear at high rpms (>5k)...if not ur f/c drops

[Satria]

At moment bike seems more responsive so no whacking yet.. but seems cant go further than 105km/h.. hmm prob didnt whack enough..

[stsoh]

deleted...deleted.

Edited July 5, 2010 by stsoh

[Satria]

Originally posted by stsoh@Apr 22 2006, 04:10 PM

why did u want to change it?

 

after u install the stl steel header, did any1 re-tune the carb?

Err not tuned yet (except done by your skillful hands the other time).. I just wanted to try it thats all.. will revert to my stock once satisfied..

[stsoh]

deleted...deleted.

Edited July 5, 2010 by stsoh

[Satria]

I'm still using MJ#98, slot#3, pilot on 2 3/4 turns as per last setup by you..

 

Not intending to mod caused its a trial header.. confirm power is there but need to see how the fc affected. Seems for youself mileage drops significantly. will monitor on my side.

[raden]

Originally posted by xishuo@Apr 22 2006, 03:08 AM

raden my fren's still getting license. but i can gurantee his sincerity. just a question before hand. how much are you selling ah?

 

let yr friend got the license first then u can talk about the price ok...

 

 

[Guest jagger]

yoyo, jus got my header change. Got it For $152 only after i told the mech abt uncle soh.. thanks uncle soh. U saved me $30!!.now my bike is much more smoother and pick up is ..

 

oh btw xishuo, i dun recommend u to lower down the fork if u pillion ppl most of the time or do pillion ppl sometimes. without lowering down the fork, my gf already complain about back aches. U see, our seat isn't like rxz or other 2b sports bike where the rider n the pillion seat isn't too far off, ours is actually quite far... ur pillion have to bend down n hold u if u don't have a box..un like those class 2 bikes, the pillion can share seat, but us is .. by lowering it down, u have to bend plus ur pillion have to bend even more...

yesh,it gives u a nicer look plus also gives u less vibrations.. but it will strain ur palm and joints.. think abt the long run... remember our bike most of the tyme vibrates alot..

 

back to me, the mech recommend me to change my silencer,$60. gives better top end speed... but i don't wanna loose pick up... how???

[stsoh]

deleted...deleted.

Edited July 5, 2010 by stsoh

[xishuo]

alrite thx jagger for the information. hmm. then guess i'll just stick with the deffault configuration then.

 

i also agree our bike vibrate alot haha..

 

[stsoh]

deleted...deleted.

Edited July 5, 2010 by stsoh

[SlayGay]

hey guys are u all still using the stock brake pads? thinking of changing my front one. the braking effect feels v weak . Anyone recommend any model for our bikes?

[stsoh]

deleted...deleted.

Edited July 5, 2010 by stsoh

[xishuo]

morning everybody. ^_^ just washed my bike...

 

any good waxing brand to intro?

 

wish you all have a very nice day.

[stsoh]

deleted...deleted.

Edited July 5, 2010 by stsoh