Yamaha FJR1300

[Pauche]

Originally posted by comics00@Jul 4 2005, 02:17 AM

base on spec shouldn't be a prob to hit 280km/h for FJR1300 having 145hp. was riding TDM900 that weighs >210kg with onli 86hp can reach 220km/h (power cut) u r rite abt the wind, riding my TDM it at ^180km/h quite siong

145bhp at the crank or at the rear wheel?

[ashenZ]

hey guyz...

 

There might be a ride to Tasik Banding organised by HamsterZ in aug.. date is 5-9aug....

 

Anyone interested??? Hmmmzz shud be using Grik Highway???

[Teamlm]

Originally posted by comics00@Jul 4 2005, 02:17 AM

base on spec shouldn't be a prob to hit 280km/h for FJR1300 having 145hp. was riding TDM900 that weighs >210kg with onli 86hp can reach 220km/h (power cut) u r rite abt the wind, riding my TDM it at ^180km/h quite siong

TDM is Chain driven, FJR is shaft driven. AS for shaft drive lots of power loss on the propeller .

 

Take a R6, it could do 299km per hour.

 

280km/hr for FJR quite impossible for me. Might have to shed some weight to do it. Tried and tested many times on the NOrth South highway still cannot. I opened and maintained (Full throttle) for at least 30sec at the max speed 245km per hour , speed maintained just won't go up no matter how hard i pumped. At this speed and the duration ,Engine temp rised up to three bar.

[SpEr]

Originally posted by ashenZ@Jul 3 2005, 08:07 PM

issit the same problem?? best is if u go to michael again.... since u fix it there..

 

if still persist... n michael cun fix it... try looi's .... meng tong n michael is one of the few best mechanics around...

 

The ride was wonderful~! finalli the front assembly feelz sound n smooth.... but the tyres still get buttery @ high speed... was told i over-pump the tyre pressure... may try another time to see if itz realli true... if not......

 

FINALLY!~~!~! I hit over the 200kmph barrier~!~!~! huurrayyy~ :cheer:

 

Managed to keep up with Teamlm.. for the 1st time.... or maibe he "let water" Managed to clock 240kmph.. n slightly above abit.... but dats full throttle liaoz.... at 8.5K rpm...

 

Any guyz managed to hit higher speed??? the meter is set 290kmph max.... wud realli wana try hit at least to 280kmph just once..... but seems like kena power cut.... unless muz drag all the way up at 4th gear??

Had done 270... with allowance to go further..

[Teamlm]

Originally posted by SpEr@Jul 4 2005, 03:11 PM

Had done 270... with allowance to go further..

Hi Bro,

 

How did you do it.? That's very impressive! ( With allowance to go further.- Your quote) I'm keen to know more. Please advise on the following;

 

1. Your bike year of manufacture?

 

2.Any basic mods? If any, Please share it with us.

 

3. What fuel grade were you using?

 

4. Where and which road did you make this event happen?

 

5. Sides boxes fitted up?

 

6. How long did it last?

 

Thanks mate!

[comics00]

Originally posted by Teamlm@Jul 4 2005, 03:07 PM

TDM is Chain driven, FJR is shaft driven. AS for shaft drive lots of power loss on the propeller .

 

Take a R6, it could do 299km per hour.

 

280km/hr for FJR quite impossible for me. Might have to shed some weight to do it. Tried and tested many times on the NOrth South highway still cannot. I opened and maintained (Full throttle) for at least 30sec at the max speed 245km per hour , speed maintained just won't go up no matter how hard i pumped. At this speed and the duration ,Engine temp rised up to three bar.

did u try without the pinners & the windshield to the lowest position? or is it due to the power cut

[Teamlm]

Originally posted by comics00@Jul 5 2005, 05:55 AM

did u try without the pinners & the windshield to the lowest position?  or is it due to the power cut

I ride with full panniers on. With prone position and wind shield at the lowest point.

 

I've spoken to Ming Tong of Looi's Motor. He told me FJR max speed is 250km per hour on open road. However, it can be improved by doing some setting on our ECU. In another words, do a minor tunning on our fuel and air mixture. With this small little mod, it can reach to 260km/per hour.

 

I Just want to bring out the full potential of my FJR. Sometime, When i think of that, probably just settle for a Suzuki Hayabusa.

 

My coming project is to upgrade the performance to a better and meaner machine by the following.

 

1. Bigger fuel pump

2. Power commander, (If the cost is within my budget)

3. Removal of power cut if there is any.

4. Remapping of the ECU to accomodate large intake of air and fuel intake.

5. Lose weight on the rider.

[ashenZ]

i juz wan louder pipes~ hehe~!~! :box:

[vara]

Originally posted by ashenZ@Jul 5 2005, 02:54 PM

i juz wan louder pipes~ hehe~!~! :box:

hahaaa...loud pipes...

 

you can hv mine if u wanna....its up for sale.

[omnislash]

Originally posted by vara@Jul 5 2005, 11:03 PM

hahaaa...loud pipes...

 

you can hv mine if u wanna....its up for sale.

I think he wants loud and legal... http://www.websmileys.com/sm/happy/044.gif

[SpEr]

Originally posted by Teamlm@Jul 4 2005, 07:07 PM

Hi Bro,

 

How did you do it.? That's very impressive! ( With allowance to go further.- Your quote) I'm keen to know more. Please advise on the following;

 

1. Your bike year of manufacture?

 

2.Any basic mods? If any, Please share it with us.

 

3. What fuel grade were you using?

 

4. Where and which road did you make this event happen?

 

5. Sides boxes fitted up?

 

6. How long did it last?

 

Thanks mate!

Tell you seriously,

 

I had only done with 270 once..

But actually my fren has done an easy 280 with his. My usual meet the mark is 240 to 260.. Seldom push further as i just wanna let the bike have abit oh whack ...

 

Anyway my frenz bike is the model with the signals lights protruding out.. where mine is the 04 model ... But the way i am only weighing at 59kgs

[deanz4]

guys and ride coming up?? why nobody goin to the bike fest??? is the owner of FY8650 FJR here??? i think he the guy wrking at my wrking place..

[vara]

Originally posted by omnislash@Jul 5 2005, 11:20 PM

I think he wants loud and legal... http://www.websmileys.com/sm/happy/044.gif

oh really????.....if its legal.....it aint loud.....i shld say

[ashenZ]

itz too expensive leh... plus the cost of kena fine even worse..

[vara]

Originally posted by ashenZ@Jul 6 2005, 06:42 PM

itz too expensive leh... plus the cost of kena fine even worse..

hahhaaa...use it for trip only

 

guyz, check this out....a pair of remus street legal on ebay....

 

teamlm,

you must be drooling on it huh???.....hehe

 

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...e=rvi:1:1v_home

[Teamlm]

Originally posted by vara@Jul 6 2005, 10:50 PM

hahhaaa...use it for trip only

 

guyz, check this out....a pair of remus street legal on ebay....

 

teamlm,

you must be drooling on it huh???.....hehe

 

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...e=rvi:1:1v_home

Yo Vara,

 

Thanks for the high light.! Sound good to be true mate! Jus wondering is the Singapore distributor bringing in? Please join us for a trip or two in the coming week!

[vara]

Originally posted by Teamlm@Jul 7 2005, 01:37 AM

Yo Vara,

 

Thanks for the high light.! Sound good to be true mate! Jus wondering is the Singapore distributor bringing in? Please join us for a trip or two in the coming week!

yeah...looking forward also but you hv to let me know early.

 

coz I work shift....

 

so whats the coming trip all about?

[Teamlm]

hi aSHEN Sifu,

 

Please chio us. Any trip on this Sunday? Terry will be back this evening. We will discuss the Phuket-Hatyai-3NCR ride on this Sunday ride if there's any.!

[ashenZ]

sunday dunoe go where ehh... ran out of ideas.... wud like to try coastal roads though...

[vara]

Originally posted by Teamlm@Jul 8 2005, 11:16 AM

hi aSHEN Sifu,

 

Please chio us. Any trip on this Sunday? Terry will be back this evening. We will discuss the Phuket-Hatyai-3NCR ride on this Sunday ride if there's any.!

aah haaaa.....3 nation ride....when will that be?

 

 

 

alamak....sunday ride definitely a no-no for me...

[deanz4]

Originally posted by vara@Jul 7 2005, 08:23 AM

yeah...looking forward also but you hv to let me know early.

 

coz I work shift....

 

so whats the coming trip all about?

hai there vara u working shift huh?? how yr wrking pattern?? me too eh wrking shift. 3day wrk den 4 days off and vise versa.. mine starts on a sunday u leh?? and u wrking where?

[thongkh]

i just get myself an 2nd hand FJR... hehe...

ride it for a week... hehe... just wanna ask some advice what shuold i check if i plan to go for long trip?

[Teamlm]

Do allow me to start off with knowing each other better. This column is dedicated to know and identify FJR fellowship names thru bike number, when happen to meet on the same road. (You may opt not to post your bike number if you're not comfortable.)

 

So as to eliminate, "Oi, what's your name?"

 

 

1.) AshenZ (Galaxy BLue) aka BG, AY9999R

2.) Tealm (Storm Silver) aka Denrick Liew, FZ18S

3.) Glenn (Storm Silver) aka Glenna Cheah, FU7A

4.) FJRider (Galaxy Blue) aka Jason, FY8668T

5.) Rahman (Galaxy Blue)aka Rahman FG786H

6.) Terry (Techno Jade) aka Terry FY2997H

7.) Chung ('05 Silver_Blue)

8.) Cheekozer (Galaxy Blue)

9.) Omnislash (Red) aka Chua, 8437

10.) Sonic seed (Silver) FU6008A

11.) Rebornbiker (Techno Jade) aka Marcus, FX2055G

12.) Vara (Galaxy Blue) aka Tamhid, AF242A

13.) Sper (Storm Silver)

14.) deanz4(maroon) FD23S but goin changed no as it belong to shop

15.) Tincan (going-to-be FJR rider)

16.)ThongKH

17.)SpER

18.)

19).

20).

 

If i do miss out anyone, Kindly please add yourself to list.

ThankS!

[Teamlm]

Originally posted by vara@Jul 8 2005, 09:57 PM

aah haaaa.....3 nation ride....when will that be?

 

 

 

alamak....sunday ride definitely a no-no for me...

The 3 NCR is on the 17th-19th Sept 2005. Some of us will be setting out on tentatively on Thursday 15th Sept 2005 @4am. We will be Heading out to Hatyai (01 nite), Phuket (01 nite) and head to Penang(1-2 nites 3NCR).

 

The b/m are the participants on the a/m trip.

 

1.Ashen

2.FjrRider

3.Glen

4.Teamlm

5. Terry

 

For your info,

 

FJR Bikes purchased from Hong Leong dealers are entitled to 50% subsidy(3NCR). Based on first come first serve.

[vara]

Originally posted by deanz4@Jul 9 2005, 02:33 AM

hai there vara u working shift huh?? how yr wrking pattern?? me too eh wrking shift. 3day wrk den 4 days off and vise versa.. mine starts on a sunday u leh?? and u wrking where?

my shift starts on sunday too, same as yours...this coming week will be a short working week for me.

 

how abt u?