[Group] YAMAHA RXZ

[alep20]

ah. this one i not sure. haha. coz i used to feel that way too. i at a point of time increase the amount of 2t. 30ml/l but after awhile i feel like redundant. coz u use 25ml/l u whack. den u running in, ride slow2 u put more 2t like wasted. thats what i feel la. my experience.

 

 

AH! i got some tips oso. for those who wanna use pump, its fine uh. den u can also add in a little bit of 2t inside tank oso. abit oni. like few ml. if too much bike will feel heavy. (speak like pro, but actually noob so if i say something wrong, please advise k lao jiao here?)

 

actually,20ml per liter is already more than enough,seriusly,i used to put 10ml per liter and my riding style varies from whacking to riding slow..if wanna play safe jus use 20-25ml..30ml is alot already,unless u going thailand with rxz den i assume its ok..hehe

[wantongkol07]

Wantongkol any 3bs pipe to let go cheap2?

Mei you. No hap uh bro. sorry. I can help u ask my fren thou.

 

 

actually,20ml per liter is already more than enough,seriusly,i used to put 10ml per liter and my riding style varies from whacking to riding slow..if wanna play safe jus use 20-25ml..30ml is alot already,unless u going thailand with rxz den i assume its ok..hehe

 

U mat rempit what. so different. haha.

[blurchaoz]

if u are doing running in and travelling at 80km/h max. 25ml/l is good enuf.

try not to play more then 25ml/l becos to much 2t in your tank that u premix will make it hard to start sometime becos the spark plug might have a hard time to ignite your petrol fume in the block which is for combustion.

 

if u want to try putting in 30ml becos u feel insecure that your piston is not lube well maybe u can try putting it in 30ml/l on your first visit to the pump station then the 2nd one u put in 25ml/l the 3rd one 30ml/l the 4th one 25ml/l and so on.

 

the other bad thing if u put too much of 2t into the tank u will end up with smokey pipe plus unburn 2t flowing out from your pipe. so why waste 2t??

ur fiber inside the pipe will also be kinda slimy as well.

[SlowButSteady Bro]

who wanna go jb today call me at 83222946,lincah2

[ijamhamizam]

bro,19th june sounds perfect to me..i just sent my schedule just now..my work that day ends at 8pm..i should be able to meet u guys..how??meetup at spore flyer??quite nice place to lepak and chit chat..

 

oh n btw,i abit paiseh uh,cos my bike damn stock..rims like apek2,last warning..even my fork is not down yet..haiya,malu lor...

[bleeeek]

eh guys, i just done my full service for the first time for this bike in soo many years for this bike. the mech open my block and fuh see the piston rabak alrdy.. the piston was longgar inside the cylinder and this causes the combustion fire and force to sip out of the gap.. so my piston got scratch and black along the sides. no wonder my bike not that much power and drink petrol like extra kuat gitu..

 

niway, i just want ask whether i kena chop or not. full service is rm49 change piston and all the required stuff to change and do (like reboring, piston ring and all) i kena ard rm140.. so total is rm190.. is it normal?

[bleeeek]

oh and if tukar piston have to run in also eh? so must follow the pantang larangs?

[Izammo]

realie uh 80-90??? cnfrm werking and can test uh??? luckily i'm selling ma bike already if not i buy uh..lol...

 

same for me bro my engine noisy at 90... scared to go beyond cos afraid it will jam..lol..hahaha...

if u want to use the old head fairing u nid to buy front head lamp, brackets and ofcos the head fairing...

yes it have ori purple colour as ive used dat paintwerk b4 ...

i'll try and find ma lastyme pic...

if can find i'll post and show it to ya hw it looks lyke...

 

yes confirm. i called and asked, then i also went down. in the end i nvr buy cos i fix speedo digital liao lo! haha.

 

pls find the pic, cos i like never see the kotak purple color.

 

alamak bro i tink cannot go uh cos cnfrm ltr im being left behind cos my bike is having prob going fast and afraid to go beyond 90km/h unless someone accompany me ride slow2 together den mayb i go..lol...hahaha...

 

i can accompany side by side. wanna hug also can. haha.

 

thanks izzamo

 

btw u guys meeting up can i join ???

 

your welcome.

bro,19th june sounds perfect to me..i just sent my schedule just now..my work that day ends at 8pm..i should be able to meet u guys..how??meetup at spore flyer??quite nice place to lepak and chit chat..

 

oh n btw,i abit paiseh uh,cos my bike damn stock..rims like apek2,last warning..even my fork is not down yet..haiya,malu lor...

 

rims like apek is how ar? can describe? haha. bike stock la power.

 

oh and if tukar piston have to run in also eh? so must follow the pantang larangs?

yes i think so.

[alep20]

oh and if tukar piston have to run in also eh? so must follow the pantang larangs?

 

some ppl say dont need,some ppl say need...lets put it this way,if u luv ur bike,ur bike will luv u too...if u bo chap ur bike,ur bike will bochap u back(eg piston jam all that stuff)...if u luv ur bike many2,it will be like a spoilt kid..if u r strict with ur bike(as in sometimes ride slow sometimes rempit),it will bring out the best result...so its up too u if u wanna run in,ill be running in if i were u but will drag gears up to 100 occasionally.

[SlowButSteady Bro]

Okay went to LarkinPerdana as got 1 friend recommend.Mech young Malay Chap.Shop quite ex but service tip top.Change to RB 17x1.85 8 spokes sport rims with rear Michelin Hi-Sporty 90/80,Front Corsa 80/90,3BS stock pipe,38 sprocket,Change con-rod,Piston size 1.50,Lay and service block,Double head gasket,Piston ring,Engine cover screw,Main jet 2.50/Pilot 2.30,Setting feel bike greeeaaat.Altogether kena chop RM950/--What i like whatever things he change he show me.Then test until i satisfied.But too bad have to running in with speed no more than 90kmh.

[wonderkid17]

guys i got a question. recently i just change my top block gasket. now funny things happening to my bike. when i ride, got these sounds coming from the block as i throttle. what could have caused these? and how to cure it?

[izz]

Okay went to LarkinPerdana as got 1 friend recommend.Mech young Malay Chap.Shop quite ex but service tip top.Change to RB 17x1.85 8 spokes sport rims with rear Michelin Hi-Sporty 90/80,Front Corsa 80/90,3BS stock pipe,38 sprocket,Change con-rod,Piston size 1.50,Lay and service block,Double head gasket,Piston ring,Engine cover screw,Main jet 2.50/Pilot 2.30,Setting feel bike greeeaaat.Altogether kena chop RM950/--What i like whatever things he change he show me.Then test until i satisfied.But too bad have to running in with speed no more than 90kmh.

 

may i knw where is the shop?

[syamitomo]

some ppl say dont need,some ppl say need...lets put it this way,if u luv ur bike,ur bike will luv u too...if u bo chap ur bike,ur bike will bochap u back(eg piston jam all that stuff)...if u luv ur bike many2,it will be like a spoilt kid..if u r strict with ur bike(as in sometimes ride slow sometimes rempit),it will bring out the best result...so its up too u if u wanna run in,ill be running in if i were u but will drag gears up to 100 occasionally.

 

Nicely put bro!!!

[syamitomo]

RXZ LOVERS MEETUPS

 

DATE: 19/06/2010 (2130HRS till late)

 

LOCATION: ICA Building(Lavender) Carpark before proceeding to Memo for chillouts...

 

THOSE WHO ARE KEEN, PLEASE SUBMIT YOU NAME & CONTACT BELOW -

 

 

1.) DeXirant (+65 8484 3654)

2.) syamitomo (+65 9187 8167)

3.) ijamhamizam (hp no pls)

4.) ikimono (hp no pls)

5.)

6.)

7.)

8.)

9.)

10.)

11.)

12.)

13.)

14.)

15.)

 

IF IN DOUBT, PLEASE CONTACT ME FIRST FOR INFOs.QUOTE MINE & ADD YOU NAME ACCORDINGLY, THANKS. HOPEFULLY THERE'S MORE TO JOIN US~

 

PS, Izz toyol!!! Blurchaoz! U joining us??? Cannot forget these otais... Hehehe... XD

[Hilminho]

RXZ LOVERS MEETUPS

 

DATE: 19/06/2010 (2130HRS till late)

 

LOCATION: ICA Building(Lavender) Carpark before proceeding to Memo for chillouts...

 

THOSE WHO ARE KEEN, PLEASE SUBMIT YOU NAME & CONTACT BELOW -

 

 

1.) DeXirant (+65 8484 3654)

2.) syamitomo (+65 9187 8167)

3.) ijamhamizam (hp no pls)

4.) ikimono (hp no pls)

5.) Hilminho (96445941)

6.)

7.)

8.)

9.)

10.)

11.)

12.)

13.)

14.)

15.)

 

IF IN DOUBT, PLEASE CONTACT ME FIRST FOR INFOs.QUOTE MINE & ADD YOU NAME ACCORDINGLY, THANKS. HOPEFULLY THERE'S MORE TO JOIN US~

 

PS, Izz toyol!!! Blurchaoz! U joining us??? Cannot forget these otais... Hehehe... XD

[ijamhamizam]

RXZ LOVERS MEETUPS

 

DATE: 19/06/2010 (2130HRS till late)

 

LOCATION: ICA Building(Lavender) Carpark before proceeding to Memo for chillouts...

 

THOSE WHO ARE KEEN, PLEASE SUBMIT YOU NAME & CONTACT BELOW -

 

 

1.) DeXirant (+65 8484 3654)

2.) syamitomo (+65 9187 8167)

3.) ijamhamizam (+65 9488 0580)

4.) ikimono (hp no pls)

5.) Hilminho (96445941)

6.)

7.)

8.)

9.)

10.)

11.)

12.)

13.)

14.)

15.)

 

IF IN DOUBT, PLEASE CONTACT ME FIRST FOR INFOs.QUOTE MINE & ADD YOU NAME ACCORDINGLY, THANKS. HOPEFULLY THERE'S MORE TO JOIN US~

 

PS, Izz toyol!!! Blurchaoz! U joining us??? Cannot forget these otais... Hehehe... XD

 

..........

[ijamhamizam]

bro,can make it at 8.30 or 9pm??the earlier the better,haha,takot janji melayu..huahaha...

[JOKE_KYLAT]

guys i got a question. recently i just change my top block gasket. now funny things happening to my bike. when i ride, got these sounds coming from the block as i throttle. what could have caused these? and how to cure it?

 

bro check ur piston ring cos i tink its loose and dat make the sound...

after checking and if its too lose chnge and its shud be okae...

hope dat helps ya...

[SlowButSteady Bro]

may i knw where is the shop?

 

Ok Perniagaan 50 Motor Tong Seng @ Jalan Susur Larkin Perdana 2,Taman Larkin Perdana,The 3 Malay Mech took sub from the tauke.The Chief Mech in his early 30's look a bit arrogant but quite a nice chap if you know him well,Imagine rebore block,drop engine change everything inside fix back took less than 3 and the half hour.He also work part time at Jln Susur 3 near Lor Bapok at midnite.

 

Okay here's the summary of what i change then you judge whether its justified or not..

1:Racing Boy 8 spoke 17x1.85 sport rims RM245

2:Front Tyre Corsa 80/90-17 RM80,Rear Tyre Michelin Pilot Sporty 90/80-17 RM135,both tubeless

3:Sprockets front 15 rear 38 RM22

4:3BS Exhaust pipe with local and ori silencer plus fibre RM100

5:Front rim bush and SKF barings RM17

6:Overhaul that include lay and service block,Change bearings,Con-Rod Japan,Piston size 1.50 sugaya brand,File and service reed valve RM370.

 

Total RM969 discount until vomit blood RM955.Now 95% of the kacang goreng sound almost gone.Shop open from Mon-Sat 1000-2100.If you go there for servicing find the Malay guy with mallete hair,dark skin.Say the White and Blue RXZ recommend you.

[hjapheth]

Hello guys . New rxz-er here . Nice to meet you all (:

[Hilminho]

Bros, wat type of rear suspension aka 'gantong' do you guys use for your Zs? Mine juz sent for service coz leaking already. So juz in case if still leaking after service, can recommend me wat brand or type of rear suspension that's best for my Z? How much and where to buy pls.... Lim Ah Boy shop got sell? Long time never go there.....

[syamitomo]

Hello guys . New rxz-er here . Nice to meet you all (:

 

Hello... Care to join tis 19th???

 

Bros, wat type of rear suspension aka 'gantong' do you guys use for your Zs? Mine juz sent for service coz leaking already. So juz in case if still leaking after service, can recommend me wat brand or type of rear suspension that's best for my Z? How much and where to buy pls.... Lim Ah Boy shop got sell? Long time never go there.....

 

As I always recommend ppl, original Yamaha YBR sush. 330mm, simple black-chrome design wif no "botol". Cost $45(last checked) @ Rowell Rd, cheap for a China-made sush but stiff as hell. Gd for those wif heavy loads...

[blurchaoz]

RXZ LOVERS MEETUPS

 

DATE: 19/06/2010 (2130HRS till late)

 

LOCATION: ICA Building(Lavender) Carpark before proceeding to Memo for chillouts...

 

THOSE WHO ARE KEEN, PLEASE SUBMIT YOU NAME & CONTACT BELOW -

 

 

1.) DeXirant (+65 8484 3654)

2.) syamitomo (+65 9187 8167)

3.) ijamhamizam (hp no pls)

4.) ikimono (hp no pls)

5.) Hilminho (96445941)

6.)

7.)

8.)

9.)

10.)

11.)

12.)

13.)

14.)

15.)

 

pending list

1) blurchaoz, macha, keinzo ( werking morning shift the next day)

 

IF IN DOUBT, PLEASE CONTACT ME FIRST FOR INFOs.QUOTE MINE & ADD YOU NAME ACCORDINGLY, THANKS. HOPEFULLY THERE'S MORE TO JOIN US~

 

PS, Izz toyol!!! Blurchaoz! U joining us??? Cannot forget these otais... Hehehe... XD

[izz]

RXZ LOVERS MEETUPS

 

DATE: 19/06/2010 (2130HRS till late)

 

LOCATION: ICA Building(Lavender) Carpark before proceeding to Memo for chillouts...

 

THOSE WHO ARE KEEN, PLEASE SUBMIT YOU NAME & CONTACT BELOW -

 

 

1.) DeXirant (+65 8484 3654)

2.) syamitomo (+65 9187 8167)

3.) ijamhamizam (hp no pls)

4.) ikimono (hp no pls)

5.) Hilminho (96445941)

6.) izz(94561426) if chill till midnite lom comfirm...

7.)

8.)

9.)

10.)

11.)

12.)

13.)

14.)

15.)

 

IF IN DOUBT, PLEASE CONTACT ME FIRST FOR INFOs.QUOTE MINE & ADD YOU NAME ACCORDINGLY, THANKS. HOPEFULLY THERE'S MORE TO JOIN US~

 

PS, Izz toyol!!! Blurchaoz! U joining us??? Cannot forget these otais... Hehehe... XD

 

haiyoyoyyoyoyoyoyo

[Izammo]

As I always recommend ppl, original Yamaha YBR sush. 330mm, simple black-chrome design wif no "botol". Cost $45(last checked) @ Rowell Rd, cheap for a China-made sush but stiff as hell. Gd for those wif heavy loads...

hmm. good recommendation. i also looking for suspendies. but need to diy ah??