[Group] YAMAHA RXZ

[fred krr racer]

3c car license lerrrr. @ bbdc they put 3c. so i putt lorrr.

 

syam: fri laaaaaaaaaaaaa wash bike. today ppl working seme.

 

ucie: sorry la yang boleh buat orang nangis. haha. sorry la yang nak buat moto jackpot. =)

 

3c ekh? leh drive ape ekh? 3 tahu la 3a tau la.. 3c ape benda plak.. hybrid car ekh?

 

syam: bila nak service.. lao kao tlg kau aku beli kan makan jugak ah.. + air..

[wantongkol07]

3c ekh? leh drive ape ekh? 3 tahu la 3a tau la.. 3c ape benda plak.. hybrid car ekh?

 

syam: bila nak service.. lao kao tlg kau aku beli kan makan jugak ah.. + air..

 

haha. dier tulis 3c la at the bbdc book. tsk.

[Hilminho]

Guys, juz wanna ask, after changing pipe and sprokets size 16/38, I find my fuel consumption increased than usual lah. Is it usually like that after changing those parts? Or is there aniting else i need to set?

[SlowButSteady Bro]

Guys, juz wanna ask, after changing pipe and sprokets size 16/38, I find my fuel consumption increased than usual lah. Is it usually like that after changing those parts? Or is there aniting else i need to set?

 

 

Kao slalu main pikap atau berdesut kat highway?Kalau pikap kau rentap memang tak pegi sebab sprocket kecik tapi kat highway sedap.Kalau kau nak cruising 80kmh turun satu gear baru ok.Kalau 80 pakai gear top memang enjin tak sedap.

[Hilminho]

Kao slalu main pikap atau berdesut kat highway?Kalau pikap kau rentap memang tak pegi sebab sprocket kecik tapi kat highway sedap.Kalau kau nak cruising 80kmh turun satu gear baru ok.Kalau 80 pakai gear top memang enjin tak sedap.

 

oh ok... thks

[nosey]

bro, u need second hand iu by wen eh??

 

bfore 20 july..got iu inspection uh..so i need it urgent..

[Izammo]

Hmmm... Piston set are quite costly u noe, ard $50 if I'm not wrong for an original one. So if those are excluded, then I think it's a bit ex ah. Well for me anyway. But if u think the block looks ok, no scratches on the cylinder, then y not? Can keep as spare! Or jual to others whose desperate for one! Lol...

 

Should be after noon; Danny promise me to treat me lunch aft helpin him out wif his bike! Hehehe...

 

Alamak... Well in the end I (and Danny) washed our bike @ Yishun aft settling his bike! Lol...

 

look nye okay la, since my block da fully big (english berterabuh) cannot rebore anymore. and da teruk, so ingat nak buy.

 

after noon cannot ah, working until night. next time je la..

 

3c ekh? leh drive ape ekh? 3 tahu la 3a tau la.. 3c ape benda plak.. hybrid car ekh?

 

syam: bila nak service.. lao kao tlg kau aku beli kan makan jugak ah.. + air..

fuh. got + air somemore. any way hybrid car tu wat eh? saw alot of hybrid car recently.

 

 

anyway to the otais, i still havent get an answer for this ah. my bike like bobok when riding, like bob bob bob, why ah? how to adjust? not shiok ah.

[wantongkol07]

look nye okay la, since my block da fully big (english berterabuh) cannot rebore anymore. and da teruk, so ingat nak buy.

 

after noon cannot ah, working until night. next time je la..

 

 

fuh. got + air somemore. any way hybrid car tu wat eh? saw alot of hybrid car recently.

 

 

anyway to the otais, i still havent get an answer for this ah. my bike like bobok when riding, like bob bob bob, why ah? how to adjust? not shiok ah.

 

could be due to your settings bro. it could be also due to ur block like da fully big what you've said. best is to get it check by your TRUSTED mech. if not, kena chop.

[syamitomo]

Hey!!! Thanx to Alep, Danny & co for coming all the way down to my place! Hope u enjoy ur clean carb, new piston rings and settings, Alep! Hope u guys learn somethin from tis meetup and will hav no prob dismantling ur rxz the next time! And Danny, u owe me and ur fren somethin tis coming Sun. Heh heh heh...

 

2 days of gettin my hands dirty, tired nak mampz! Gd nite fellow forumers!!!

[alep20]

Hey!!! Thanx to Alep, Danny & co for coming all the way down to my place! Hope u enjoy ur clean carb, new piston rings and settings, Alep! Hope u guys learn somethin from tis meetup and will hav no prob dismantling ur rxz the next time! And Danny, u owe me and ur fren somethin tis coming Sun. Heh heh heh...

 

2 days of gettin my hands dirty, tired nak mampz! Gd nite fellow forumers!!!

 

can i be ur assisitant when others wanna diy full servis??but the removal and the putting back of the piston to the conrod and the piston masuk the block u do lah..hehe..lom confident sgt ler btw thanks yar..

[ucie]

korang macam enjoy jer..moto aku rosak lagik siul..

[wantongkol07]

korang macam enjoy jer..moto aku rosak lagik siul..

 

asek rosak je bro? what happen this time?

 

syam: bro, never tell me pon ytd got DIY?

[fred krr racer]

Hey!!! Thanx to Alep, Danny & co for coming all the way down to my place! Hope u enjoy ur clean carb, new piston rings and settings, Alep! Hope u guys learn somethin from tis meetup and will hav no prob dismantling ur rxz the next time! And Danny, u owe me and ur fren somethin tis coming Sun. Heh heh heh...

 

2 days of gettin my hands dirty, tired nak mampz! Gd nite fellow forumers!!!

 

bila lagi ade buat.. n wat do i nid to bring ekh? i wanna join la..

[nosey]

korang macam enjoy jer..moto aku rosak lagik siul..

 

da mcm motor aku lar plk..hahaha..bende2 semua take turn nk rosak..nk melawakn motor pn tk kesampaian

[ucie]

gua punya piston jam..

[wantongkol07]

gua punya piston jam..

 

lu lepas oberhaul ade buat running in tak? haiya. 2t cukop tak? pakai bancor ke pump?

[alep20]

bila lagi ade buat.. n wat do i nid to bring ekh? i wanna join la..

 

this sun syam is diy-ing his bike...msg him for more details..the diy session yesterday was a last minute thingy lah,sori didnt bring u guys along

[fred krr racer]

this sun syam is diy-ing his bike...msg him for more details..the diy session yesterday was a last minute thingy lah,sori didnt bring u guys along

 

wah okay2.. wanna ask? how much if i want 2 buy piston, piston ring.... n where?

[SlowButSteady Bro]

Wah good siol Syam can open block,Next time wanna change piston/ring/conrod/service block can call him ardy and give upah!

[Nicky Blink Blink Blink]

do they sell sport rim size "18"???

[alep20]

wah okay2.. wanna ask? how much if i want 2 buy piston, piston ring.... n where?

 

u nid all the gaskets(top block,block,pipe) which cost about -/+8 dollars,and if ur piston is not oversize,u can by the ring for about +/- 20 dollars..if urs is oversize(1.00 n abv) then nid to buy the piston set which comes with the piston n the rings which will cost +/- 30 dollars cos its very hard to find rings for oversize piston...have all that in hand and ur ready to diy full service bro

[fred krr racer]

orite bro thanx.. oh yah u 4got 2 tell me where to buy..

[ucie]

gua punya 2t tak jalan dah..

[sally_who]

gua punya 2t tak jalan dah..

 

haiyah.. same lah! didnt know that my 2t didnt work. then piston jam.. 3 whole days no bike.send it to the bike shop. yesterday pick up the bike, then today in the middle of the expressway, suddenly bike just died on me. can start lah but every few metres it just kaput.

 

fed up already. i want to burn my bike.

[syamitomo]

can i be ur assisitant when others wanna diy full servis??but the removal and the putting back of the piston to the conrod and the piston masuk the block u do lah..hehe..lom confident sgt ler btw thanks yar..

 

Ya tat one can be a lil bit tricky coz once the pin drop into ur engine area, habis! Standby for down engine! Lol...

 

syam: bro, never tell me pon ytd got DIY?

 

Sori but like Alep said, it's kinda like a last min thingy. And I noe weekdays u guys are busy wif skool/work...

 

bila lagi ade buat.. n wat do i nid to bring ekh? i wanna join la..

 

wah okay2.. wanna ask? how much if i want 2 buy piston, piston ring.... n where?

 

u nid all the gaskets(top block,block,pipe) which cost about -/+8 dollars,and if ur piston is not oversize,u can by the ring for about +/- 20 dollars..if urs is oversize(1.00 n abv) then nid to buy the piston set which comes with the piston n the rings which will cost +/- 30 dollars cos its very hard to find rings for oversize piston...have all that in hand and ur ready to diy full service bro

 

There u go, Alep alrdy explain...

 

Wah good siol Syam can open block,Next time wanna change piston/ring/conrod/service block can call him ardy and give upah!

 

Ahakz... Wan me to down engine??? Mampoz! Like tis someone last time here use to say, u need to hav a compressor in ur house in order to be able to strip ur bike! I mana ada tat one, only manual, made in China tools! Lol...

 

do they sell sport rim size "18"???

 

Yes they do sell. Just take ur pic on the varies of design available...

 

orite bro thanx.. oh yah u 4got 2 tell me where to buy..

 

Auto Machinery - 41 Rowell Road, (S) 207992

 

Ban Hoe Leong - 101 Kitchener Road, #01-33 Jalan Besar Plaza, (S) 208511