[Discussion] CB400 SUPER FOUR HYPER VTEC Revo

[KeL_87]

any bro can advise?

 

just got a new revo, when doing braking tat time will feel that the front wheel jerking and 1st gear half clutch like no power like tat..

 

anything went wrong with the bike? jus change clutch and brake lever 1 week ago..

[at0m87]

any bro can advise?

 

just got a new revo, when doing braking tat time will feel that the front wheel jerking and 1st gear half clutch like no power like tat..

 

anything went wrong with the bike? jus change clutch and brake lever 1 week ago..

 

you change to aftermarket levers?

 

brake jerking, you buy ABS model si bo?

 

i dont really feel that much power on my 1st gear too. drag also very slow..

[ldslds]

me using aftermarket levers with abs but nth wrong eh

[flooz]

any bro can advise?

 

just got a new revo, when doing braking tat time will feel that the front wheel jerking and 1st gear half clutch like no power like tat..

 

anything went wrong with the bike? jus change clutch and brake lever 1 week ago..

 

jerking at high/low speed? if at low speed, could be problem with your brake disc, happened on mine. Check if there is any uneven marking on the disc.

[flooz]

haha bro atom87 mine is ard 17km/l HAHA:angel:

bro flooz ,changing at low rpm doesn't help much so dun bother to try lol, i tried HAHA, in the end ride slow like so boring,i once tried to follow SG speed limit( 50km/hr on normal road, 90km/hr on expressway) ,and i can clock 400km for a full tank, tat was whn i travel from jurong to yishun everyday during my army life

now from jurong west to jurong east ,full tank 320 km HAHA,no worry bro , just enjoy riding,dun bother so much RIDE SAFE

 

Thanks bro! just wanna assure that this FC is a norm...

[KeL_87]

you change to aftermarket levers?

 

brake jerking, you buy ABS model si bo?

 

i dont really feel that much power on my 1st gear too. drag also very slow..

 

CNG short lever, able to fixed the power problem by tighting the clutch clable found out that it is loose..

 

bought from bike shop stated non-ABS model, but the owner manual stated it is a ABS model. so i oso don know if it is ABS or non-ABS.

 

any bro know how to see the difference?

 

jerking at high/low speed? if at low speed, could be problem with your brake disc, happened on mine. Check if there is any uneven marking on the disc.

 

it happen at low speed, will check if there is any mark..

[at0m87]

CNG short lever, able to fixed the power problem by tighting the clutch clable found out that it is loose..

 

bought from bike shop stated non-ABS model, but the owner manual stated it is a ABS model. so i oso don know if it is ABS or non-ABS.

 

any bro know how to see the difference?

 

 

 

it happen at low speed, will check if there is any mark..

 

There should be an indicator inbetween the meter for ur abs, if ur bike has it. To check brake disc, jack up the wheel, take a marker and draw a line down on the disc. Wait for it dry then spin the wheel. You will be able to see if it is uneven by looking at the marking. The whole line should remain intact when the wheel is free wheeling.

 

 

Sent from my iPhone using Tapatalk

[XiAO_ViNtaGe87]

SELLING 3 weeks old aftermarket fully adjustable brake and clutch lever..(BLACK colour)cont(9/10)$90 slighly neg TAKEN OUT FROM HONDA SUPER 4 REVO..so Only honda bikes=)

 

 

CB400 Revo flame Motovation Sliders ($70)

 

 

kindly pm me if interested=)

[at0m87]

SELLING 3 weeks old aftermarket fully adjustable brake and clutch lever..(BLACK colour)cont(9/10)$90 slighly neg TAKEN OUT FROM HONDA SUPER 4 REVO..so Only honda bikes=)

 

 

CB400 Revo flame Motovation Sliders ($70)

 

 

kindly pm me if interested=)

 

Sorry to ask, what is a "flame" motivation slider?

[emilsee]

Dear all,

 

Has anyone experienced sqeaking sound when braking?

Seems like i always have this problem.

I come down push bike forward and backward also have.

In terms of soft braking, hard braking and intermitten braking also have the squeaking sound from my front brakes.

When i did my first servicing at boon siew, they check le say no problem.

Still can tell me: Disc brake sure got sound one.

Can anyone advice me?

[XiAO_ViNtaGe87]

hmmm..it;s something u can replace for clashbar..something to protect your engine ..=)

[SparkerS1]

In terms of soft braking, hard braking and intermitten braking also have the squeaking sound from my front brakes.

 

tried using brake cleaner or contact cleaner?

might be the brake dust tats causing the sound

[xia0z5]

Does lower the idle from the orginal 1.4 rpm to 1.1 rpm help to gain more FC? and anyone know any bike shop know how to lower the rpm?

[Revouis]

Does lower the idle from the orginal 1.4 rpm to 1.1 rpm help to gain more FC? and anyone know any bike shop know how to lower the rpm?

 

it is said to gettin better fc though, unique motorsport does it

[xia0z5]

it is said to gettin better fc though, unique motorsport does it

 

okays. u do urs at there? how much for the services for lowering the idle?

[Man Donut]

Hey guys, how much is a 1st hand REVO cost? OTR maybe....tanx

And issit possible to ask the shop to put aftermarket exhaust and add on to the bike price?

[SparkerS1]

Hey guys, how much is a 1st hand REVO cost? OTR maybe....tanx

And issit possible to ask the shop to put aftermarket exhaust and add on to the bike price?

 

OTR 16k++

 

exhaust can, add on to installment meaning must pay additional interest.

inspection u still need to go for ur aftermarket exhaust

[joajas]

Hey guys, how much is a 1st hand REVO cost? OTR maybe....tanx

And issit possible to ask the shop to put aftermarket exhaust and add on to the bike price?

 

I just booked a new revo at Bike Production (Boon Siew bike),

 

OTR + shitty agreement fee, without IU, not including interest, based on coe of 1090 and not including insurance, less than 14.5K. I am expecting to top maybe 200+ for coe. Overall price still resonable.

[at0m87]

Dear all,

 

Has anyone experienced sqeaking sound when braking?

Seems like i always have this problem.

I come down push bike forward and backward also have.

In terms of soft braking, hard braking and intermitten braking also have the squeaking sound from my front brakes.

When i did my first servicing at boon siew, they check le say no problem.

Still can tell me: Disc brake sure got sound one.

Can anyone advice me?

 

 

Mine also like that, the sound very obvious, can hear when cornering.. Bike shop and forumer all tell me is like that one.

 

Sent from my iPhone using Tapatalk

[at0m87]

I just booked a new revo at Bike Production (Boon Siew bike),

 

OTR + shitty agreement fee, without IU, not including interest, based on coe of 1090 and not including insurance, less than 14.5K. I am expecting to top maybe 200+ for coe. Overall price still resonable.

 

Shitty aggrement fees and still so cheap. U shouldnt be whinning about it.

 

Sent from my iPhone using Tapatalk

[at0m87]

okays. u do urs at there? how much for the services for lowering the idle?

 

They advice me not to adjust idling cos we have auto choke. How come now they adjusting for ppl?

 

 

Sent from my iPhone using Tapatalk

[Man Donut]

OTR 16k++

 

exhaust can, add on to installment meaning must pay additional interest.

inspection u still need to go for ur aftermarket exhaust

 

I just booked a new revo at Bike Production (Boon Siew bike),

 

OTR + shitty agreement fee, without IU, not including interest, based on coe of 1090 and not including insurance, less than 14.5K. I am expecting to top maybe 200+ for coe. Overall price still resonable.

 

Hahaha, tanx guys

[joajas]

Shitty aggrement fees and still so cheap. U shouldnt be whinning about it.

 

Sent from my iPhone using Tapatalk

 

Do you feel happy when you are not told of the >$500 agreement fees hidden into the installment calculations? When you are told of the agreement fee only after your own careful calculations to dig out discrepancies in the calculations?

 

Not me.

 

For your info, in case you missed out the last part of my previous post, I said the overall price is reasonable.

 

And for prospective buyers beware, BP will not be upfront to you about the agreement fee. If you are not alert enough when going through the installment calculations, you will not realise it is there. They will only tell you when you spot the discrepancies in the calculations. I even asked them if there is any other fees involved, not once did they mentioned the agreement fee.

 

I like BP's low price, but the way they conduct business just don't give customers confidence in dealing with them. I would definitely feel better if they have been upfront about the fees involved and not let customers do the digging for hidden cost. The only reason why I buy from them is because of low overall price.

 

(20/08)Update: Just had a conversation with Ah Shui over some NCD issues. I like the way he explain things, definitely better than the other lady. Anyway issue resolved, and Ah Shui definitely change my perception towards Bike Production.

 

And to be fair to Ah Shui, I think I should mention that he throws in a Givi box into deal also.

 

Btw, I don't think I am whinning.

 

Even though this is an open forum, I believe this will be a better place if you are more polite in your reply.

Edited August 20, 2010 by joajas

[at0m87]

Do you feel happy when you are not told of the >$500 agreement fees hidden into the installment calculations? When you are told of the agreement fee only after your own careful calculations to dig out discrepancies in the calculations?

 

Not me.

 

For your info, in case you missed out the last part of my previous post, I said the overall price is reasonable.

 

And for prospective buyers beware, BP will not be upfront to you about the agreement fee. If you are not alert enough when going through the installment calculations, you will not realise it is there. They will only tell you when you spot the discrepancies in the calculations. I even asked them if there is any other fees involved, not once did they mentioned the agreement fee.

 

I like BP's low price, but the way they conduct business just don't give customers confidence in dealing with them. I would definitely feel better if they have been upfront about the fees involved and not let customers do the digging for hidden cost. The only reason why I buy from them is because of low overall price.

 

Btw, I don't think I am whinning.

 

Even though this is an open forum, I believe this will be a better place if you are more polite in your reply.

 

Alright, i apologise since you are offended by what i say. Hidden or no hidden it is still cheap!

 

And on top of it, it is from boon siew, with warrnanty right? Good buy!

 

Sent from my iPhone using Tapatalk

[joajas]

Alright, i apologise since you are offended by what i say. Hidden or no hidden it is still cheap!

 

And on top of it, it is from boon siew, with warrnanty right? Good buy!

 

Sent from my iPhone using Tapatalk

 

. Yes, it is cheap despite the fee.