[Discussion] Technical - Cosmetic Modifications

[biting_point]

which design you like, maybe you let me know how much u willing to spend! for sure it cost ard 240 or more

 

i believe he sure will contact you to buy.. nice fenders..!! god price too!! used to own one, but sold away due to cannot fit..

 

take note, Spec 1 had a diff fender from Spec 2 and 3.. not sure abt the rest..

[smiley73]

i believe he sure will contact you to buy.. nice fenders..!! god price too!! used to own one, but sold away due to cannot fit..

 

take note, Spec 1 had a diff fender from Spec 2 and 3.. not sure abt the rest..

 

left pic cost ard est $250 including shipping

the right cost close to est $400 including shipping

 

from japan.

[s4vtec]

my Project Angel Eyes!!!

 

http://photos-765.friendster.com/e1/photos/56/70/15050765/1_888580741l.jpg

[hai666]

how to color the engine sliver stripe?

Paint?

Sticker?

[rayhunter]

how to color the engine sliver stripe?

Paint?

Sticker?

 

yup u can use paint marker for it..

[hai666]

yup u can use paint marker for it..

 

 

 

thanks!!!!

[rayhunter]

my Project Angel Eyes!!!

 

Swee!!! u had fix up an additional switch for it? or it is tap with the two side signal light and an individual switch for yr headlight?

[BIKER1605199362]

Yeah, i want to buy those too before removing my pillion handle bar... anyone can help us on this?

 

 

Motoworld selling those covers, cost $50.. only available at kaki bukit.

[rayhunter]

IKER;4345109']Motoworld selling those covers' date=' cost $50.. only available at kaki bukit.[/quote']

 

bro,from yr pics,did u use H.I.D or just normal white bulb for yr headlight? very nice bright..

[B.e.n.s.o.n]

IKER;4345109']Motoworld selling those covers' date=' cost $50.. only available at kaki bukit.[/quote']

 

OHHHHHHHHH MYYYYYYYYYY FXXKINGGGGGGGGG .......... ur bike.... ur bike.... bike.... *SHOCK*

 

Rich man....

[BIKER1605199362]

bro,from yr pics,did u use H.I.D or just normal white bulb for yr headlight? very nice bright..

Its HID, but i dun use it for local riding, My headlight is dual mode... HID and Normal...

 

OHHHHHHHHH MYYYYYYYYYY FXXKINGGGGGGGGG .......... ur bike.... ur bike.... bike.... *SHOCK*

 

Rich man....

 

Hahaha... Shock ah.... I told you that you would be shock.... :cheeky:

[rayhunter]

IKER;4348624']Its HID' date=' but i dun use it for local riding, My headlight is dual mode... HID and Normal...[/quote']

 

ha..good stuff..

[rayhunter]

IKER;4348624']Hahaha... Shock ah.... I told you that you would be shock.... :cheeky:

 

conversion to spec III lookalike..

[B.e.n.s.o.n]

iker.... when u wanna go change ur petrol tank to spec 3 de??? ur outlook almost spec 3 except the petrol tank liao....

[BIKER1605199362]

iker.... when u wanna go change ur petrol tank to spec 3 de??? ur outlook almost spec 3 except the petrol tank liao....

 

 

Like that might as well i go buy spec 3... alittle difference makes it special...

HAHA.. LOL, you never tell me, i also dunno the tank different.. i tot its the same...

[Owen0606]

FJT means??

[kurarensu]

FJT is the shop name.. the signboard shows FJT =)

 

btw can any kind soul link the shinhwa spec3 threaD?

[hellsfury]

i have replied a lot of pm's so now im having PMS. to Clear things up, here's a short summary of what i know about spec 3 tail for non-vtec3

 

1)A few shops here do it, namely: motoworld, firstmotor, hua hin (the one at bukit batok, im not sure if i got the correct name) and aunty shop at lavendar

 

2)All use moulded tails, except for aunty shop.

 

3)I did mine at motoworld for SGD500.00, b4 bargaining. im not sure of the break down of the prices, but it includes the moulded tail, rear led brake lights, rear fender and labour.

 

4)Took HALF a day to complete the job, they started at 1030 and finished at 3 plus on a busy sat morning.

 

5)process, they will strip the rear until the rear sub-frame is exposed, then they will shave the sides, used to prop up the stock vtec1,2 tail. the parts shaved off from what i see was minimal and looked non-vital, so strength of sub-frame and blah blah blah is not affected. cornering is still the same.

Then they will fit the tail, add in the tail light, connect the circuits and fix the rear fender.

 

6)So where is the key hole?? shinhwa's is still using the original, while mine is under the seat. depends where u want it.

 

7)There is a clear led light and the stock red one. both perform its function

 

 

 

lastly, im aware that other than shinhwa and myself, there are a couple of spec3 tail converters out there, so pls share some input for the benefit of other modsters.

 

cheers:cheers:

[TitanicLexus]

i have replied a lot of pm's so now im having PMS. to Clear things up, here's a short summary of what i know about spec 3 tail for non-vtec3

 

1)A few shops here do it, namely: motoworld, firstmotor, hua hin (the one at bukit batok, im not sure if i got the correct name) and aunty shop at lavendar

 

2)All use moulded tails, except for aunty shop.

 

3)I did mine at motoworld for SGD500.00, b4 bargaining. im not sure of the break down of the prices, but it includes the moulded tail, rear led brake lights, rear fender and labour.

 

4)Took HALF a day to complete the job, they started at 1030 and finished at 3 plus on a busy sat morning.

 

5)process, they will strip the rear until the rear sub-frame is exposed, then they will shave the sides, used to prop up the stock vtec1,2 tail. the parts shaved off from what i see was minimal and looked non-vital, so strength of sub-frame and blah blah blah is not affected. cornering is still the same.

Then they will fit the tail, add in the tail light, connect the circuits and fix the rear fender.

 

6)So where is the key hole?? shinhwa's is still using the original, while mine is under the seat. depends where u want it.

 

7)There is a clear led light and the stock red one. both perform its function

 

 

 

lastly, im aware that other than shinhwa and myself, there are a couple of spec3 tail converters out there, so pls share some input for the benefit of other modsters.

 

cheers:cheers:

 

bro, how the tail u modify from Motorworld? I plan to modify my s4 tail and respray at Motorworld nxt week, they cost me $450 and $400 two diff price, $400 one is follow original model spec3 tail, $450 one will slightly diff for the number plate there, which the motorworld workshop ppl told me, more nicer than original de.. What is your opinion and advice, if i go motorworld modify?

[TitanicLexus]

i have replied a lot of pm's so now im having PMS. to Clear things up, here's a short summary of what i know about spec 3 tail for non-vtec3

 

1)A few shops here do it, namely: motoworld, firstmotor, hua hin (the one at bukit batok, im not sure if i got the correct name) and aunty shop at lavendar

 

2)All use moulded tails, except for aunty shop.

 

3)I did mine at motoworld for SGD500.00, b4 bargaining. im not sure of the break down of the prices, but it includes the moulded tail, rear led brake lights, rear fender and labour.

 

4)Took HALF a day to complete the job, they started at 1030 and finished at 3 plus on a busy sat morning.

 

5)process, they will strip the rear until the rear sub-frame is exposed, then they will shave the sides, used to prop up the stock vtec1,2 tail. the parts shaved off from what i see was minimal and looked non-vital, so strength of sub-frame and blah blah blah is not affected. cornering is still the same.

Then they will fit the tail, add in the tail light, connect the circuits and fix the rear fender.

 

6)So where is the key hole?? shinhwa's is still using the original, while mine is under the seat. depends where u want it.

 

7)There is a clear led light and the stock red one. both perform its function

 

 

 

lastly, im aware that other than shinhwa and myself, there are a couple of spec3 tail converters out there, so pls share some input for the benefit of other modsters.

 

cheers:cheers:

 

bro, how the tail u modify from Motorworld? I plan to modify my s4 tail and respray at Motorworld nxt week, they quote me $450 and $400 two diff price for the spec3 tail modification, $400 one is follow original model spec3 tail, $450 one will slightly diff for the number plate there, which the motorworld workshop ppl told me, more nicer than original de.. What is your opinion and advice, if i go motorworld modify?

[hellsfury]

get the moulded tail, not the modified or stock one

[B.e.n.s.o.n]

spec 3 fuel tank is smaller and shorter compared to spec one.... cutting oso more swee then spec 1..... u go change i call u ou xiang...:bow::bow:

hahaha

[BIKER1605199362]

I left see, right see almost similar leh..

 

Maybe my eyes abit wrong.... :dot:

 

See until the owner of the bike was looking at me as if i am trying to think of a way to start his bike...

 

Owner : Errr, anything wrong...??

 

Me: Oh... No, actually my frd told me that the tank of both bike is different, so i am comparing with yours.

 

Owner : I see.. to me, it looks similar since yours is also a spec 3. Finished comparing? cause i need to fetch my girl.

 

Me: sure... so sorry to hold you up...(laughing to myself, he actually thinks mine is a spec 3) LOL !!

[B.e.n.s.o.n]

******* Oops! ********

[BIKER1605199362]

what a crude explainations, but thats wht make boys understand right ??

 

Is that how your brain works? Xiao^bai ? something not fitting = Brea*t too big, can't fit in Bra... hmmmmmmm:dozed:

 

LOL !!!

 

Thats why its called 1.3 and not 3... LOL !

Now for my steering damper... muahaha