[Group] Singapore BAJAJ Team (SBT)

[alvinyansg]

how about this time round BTWO at KTM?

Edited May 30, 2011 by alvinyansg

[Pulser]

had a minor accidental this morning along yio chu kang road..

 

was travelling straight across a small junction, on the right was a van waiting to turn left into those private estate.

 

that van did not see me coming... and carry on turning...

 

i was travelling around 40kph braked... but still failed to stop in time.

 

my tire just bang into the bumper with no huge impact...

 

luckily the speed i am travelling was quite slow...

 

so no damage was done....

 

just sharing... all rider pls be careful....

 

Good to know you are safe.

[alvinyansg]

@O'Ren: here's a link to removing the coil

sorry did not take much pics cause hand very dirty and was busy helping hari fix his coils forgot after some time

only realise after i fixed everything back

 

http://www.mediafire.com/?nvlsmgutmfpiib0

[mfk74]

BTWO the UnOfficial meet up!

 

Objective: casual meet up for teh tarik and prata!! .. those with new toys or racuns can share info if the racuns do wonders or it just not work with your ride! ... hehehe

hmm btw I'm trying to get the Tigerians too to join us happens if they are keen lah .. to FZ16 riders CHEERS & THUMBS UP to you guys for to join us at our meet up!!.. kekekekekeke

 

Venue : Teh Tarik Corner @ Hj Karim AMK Ave 10

Date : Wed 1/6/2011

Time: 2100hrs onward till 2330hrs

 

http://i538.photobucket.com/albums/ff350/Nemesis_5k/HjKarim.jpg

 

http://i538.photobucket.com/albums/ff350/Nemesis_5k/HjKarim2.jpg

 

Kindly please post your nick if you are coming...

 

1) mjbs64

2) Alvin(@Lanzer @arthur_chan:come get your cams)

3) mfk74

4)

 

Please take note to park neatly along the side of the pavement

 

 

[mfk74]

@O'Ren: here's a link to removing the coil

sorry did not take much pics cause hand very dirty and was busy helping hari fix his coils forgot after some time

only realise after i fixed everything back

 

http://www.mediafire.com/?nvlsmgutmfpiib0

 

the pics look familiar..

[mfk74]

how about this time round BTWO at KTM?

 

I'm ok with it if the rest wants to...

[revhappy]

btw i just switched to reserve today.. 765km looks like i'm not going to hit that priced achievement of 1k per full tank.

 

btw i turned two rounds counter clockwise from fully clockwise for my AFR. not bad.

 

My previous UG2 used to hit about 780 kms for every 16 ltrs. That was with riding at continuous 100 kms/hr(7K RPM) without pillion. I considered that really good. Riding any slower than that wouldn't be fun. Current UG2 sprocket ratio is a bit overgeared so I ride at 85-90 kms/hr(7k RPM) and yet to finish a full tank. But it looks like this one will also give about 45-48 kms/ltr. Not bad at all

[revhappy]

Just get any T10 bulb..

 

Thanks bro, so I just t10? No need to specify watts/volts?

[revhappy]

Just get any T10 bulb..

 

Thanks bro, so I just t10? No need to specify watts/volts?

[haktek]

Thanks bro, so I just t10? No need to specify watts/volts?

 

erm u can get the led type also... t10 is standard... so no worries!!

[alvinyansg]

the pics look familiar..

 

haha...

the pics are kind of out of focus...

when it comes to DIY pics are secondary....

the fun part is getting your hands dirty and getting the stuff done...

we had such a great time chatting and fixing that we forgot about the pictures after we started...

right @mfk74...

haha...

[revhappy]

erm u can get the led type also... t10 is standard... so no worries!!

 

Oh IC. Will try at LAB, during my next visit there. Thanks

[alvinyansg]

erm u can get the led type also... t10 is standard... so no worries!!

 

actually there are different output for led T10 bulbs...but the differene in energy draw is not a lot...

[alvinyansg]

Oh IC. Will try at LAB, during my next visit there. Thanks

 

go sim lim tower better...

ask for T10 12V 5W ones...

the stock specs are T10 12V 5W...

[revhappy]

go sim lim tower better...

ask for T10 12V 5W ones...

the stock specs are T10 12V 5W...

 

Thanks bro.You are the champ when it comes to electronics stuff

[Fredd]

duh...pulsarpedia mah

 

Thanks bro.You are the champ when it comes to electronics stuff

[mjbs64]

duh...pulsarpedia mah

 

bro you never reply my msged ..... sad lah?

 

 

btw .. fredd last time your pulsar you respray to yellow rite? ..

uncle Daud riding blue pulsar intend to resparay his p200 to all black ... so his question to me and to you .. where is the ok ok place to do that? .. he don't want to go jb either ... anybody know?

 

last time I asked brandon but his replied his place the workmanship no good! ...

 

at UM second choice too ...

 

anyone can assist uncle daud here .. appreciate your info! ..

 

cheers!!

[ORen]

sorry for not posting the pics yet

later meeting hari to fix his coils for him

 

1) you need your stock spark plug head(just unscrew them from the stock coils and screw them into the protec coils)

2) yes plug and play for p200.(different bike got different response,so some might need tuning some no need)

3) yes just remove and install the protec coils(the protec wires are longer than the stock ones,you can cut them shorter)

4) yes tdk just clip on the coil cable. the K facing the direction of the spark plug

5) just make sure that after you installed the coils,start the bike to make sure it starts and then you can put back the tank

6) you can just go ahead to tape the blue part to make it black

7) changing 1 or 2 coils depends on what you are looking to achieve. if only want to change 1 coil,change the right side.(better torque) with both sides you will feel real good low end torque.

 

Fantastic Alvin, thanks a lot for the detailed reply !

[ORen]

had a minor accidental this morning along yio chu kang road..

 

was travelling straight across a small junction, on the right was a van waiting to turn left into those private estate.

 

that van did not see me coming... and carry on turning...

 

i was travelling around 40kph braked... but still failed to stop in time.

 

my tire just bang into the bumper with no huge impact...

 

luckily the speed i am travelling was quite slow...

 

so no damage was done....

 

just sharing... all rider pls be careful....

 

Glad you're ok bro, it's good you slowed down for the junction...

[ORen]

bro you never reply my msged ..... sad lah?

 

 

btw .. fredd last time your pulsar you respray to yellow rite? ..

uncle Daud riding blue pulsar intend to resparay his p200 to all black ... so his question to me and to you .. where is the ok ok place to do that? .. he don't want to go jb either ... anybody know?

 

last time I asked brandon but his replied his place the workmanship no good! ...

 

at UM second choice too ...

 

anyone can assist uncle daud here .. appreciate your info! ..

 

cheers!!

 

I know Juswheelz in front of our UM does it, but I don't know the price..

[ORen]

@O'Ren: here's a link to removing the coil

sorry did not take much pics cause hand very dirty and was busy helping hari fix his coils forgot after some time

only realise after i fixed everything back

 

http://www.mediafire.com/?nvlsmgutmfpiib0

 

This is great and more than enough, thank you so much for taking the time to put this together, it's really nice of you ! Your makan and drinks on me at the BTWO

 

Also, thanks for the precise info on the pilot lamp bulb, I need some as well for my trip and I didn't know what to get so revhappy's question was perfectly timed.

[Fredd]

@mjbs64 i did mine at shop in yishun..but if spray black should be easy..even i can diy spray myself if i noe how to dismantle everytin..hahaha..if 1 colour max should be 300+..dependin got bellypan or rear hugger etc

[mjbs64]

@mjbs64 i did mine at shop in yishun..but if spray black should be easy..even i can diy spray myself if i noe how to dismantle everytin..hahaha..if 1 colour max should be 300+..dependin got bellypan or rear hugger etc

 

sure or not you can do ? .. quality how? hahahaha

 

if you really can do one .. I ask him to call you lah... hahahaha

 

yishun where btw? ... you expect him to ride the whole yishun issit? ... kekekekee

 

address pls .. thank you! ...

 

seriously if you can do it's goodcos unle daud staying at woodland area .. who knows maybe your another neighbour too? .. kekekekee

 

can assist him? ....

[Fredd]

can do but no time..hahaha..the showroom is at blk 731 yishun ring rd. beside the supermarket..can ask the shopowner to direct him to their workshop

 

sure or not you can do ? .. quality how? hahahaha

 

if you really can do one .. I ask him to call you lah... hahahaha

 

yishun where btw? ... you expect him to ride the whole yishun issit? ... kekekekee

 

address pls .. thank you! ...

 

seriously if you can do it's goodcos unle daud staying at woodland area .. who knows maybe your another neighbour too? .. kekekekee

 

can assist him? ....

[mjbs64]

can do but no time..hahaha..the showroom is at blk 731 yishun ring rd. beside the supermarket..can ask the shopowner to direct him to their workshop

 

got their phone no ... ? better to let uncle daud call them first ...