[Group] Singapore BAJAJ Team (SBT)

[robbedzombie]

That workshop only have battlax n IRC available to fit my P180.

Their battlax cost abt $160 per piece...

So I took e IRC instead..

 

holy cow battlax cost so much now?! rip off man...rubber trees going extinct issit?

maybe u could have gotten a dunlop tt900 gp 90/80+100/80 combination for cheaper

battlax and tt900gp have similar performance imo same groove; nice rubber..

but u've changed so maybe next time.

[revhappy]

holy cow battlax cost so much now?! rip off man...rubber trees going extinct issit?

maybe u could have gotten a dunlop tt900 gp 90/80+100/80 combination for cheaper

battlax and tt900gp have similar performance imo same groove; nice rubber..

but u've changed so maybe next time.

 

yeah, for P200 and P180 UG4 the cheap and best combination is Dunlop TT900 90/80 in the front and Continental Conti Twist SM 130/70 for the rear.

I got that combination from Ah Boy for 120$

[remy79]

Not sure of mass order bro. I am planning to go there on holiday and bring it back with me. I already have too many stuffs planned to bring back, haha.

1)The full cover set(going to be very bulky, imagine tail board, headlamp and mudguard)

2)BCU

3)Left side and right side switch

4)Clutch plate assembly(currently my bike, when it is not moving, its hard to chagne from 1st gear to neutral, I believe changing the clutch plate assembly will fix this)

 

and few other small small things.

 

These things will cost about 200$ in India. In Singapore it will cost 800$ haha.

 

I have same problem no4.

Sometimes neutral lights up but...

When I let go clutch engine stall...

 

$600 difference is big savings...

How I envy u!

[remy79]

holy cow battlax cost so much now?! rip off man...rubber trees going extinct issit?

maybe u could have gotten a dunlop tt900 gp 90/80+100/80 combination for cheaper

battlax and tt900gp have similar performance imo same groove; nice rubber..

but u've changed so maybe next time.

 

No choice I tyre puncture n tags e

Nearest workshop to my house.

Furthermore rushing to work also.. Haiz

[Gunnar Jensen]

Pulsarians Singapore Roll Out .... Destination Southern Most Malaysia

 

A Day Road Trip To Tanjong Piai, Kukup & Pontian

 

Date:18th Nov 2012

Place of Gathering : GP Esso via Tuas Link

Estimated Time Start & End : 8.30am - 6pm

Estimate Distance: 160Km

Traveling Speed : varies from 60km/h - 100km/h

Pit Stop: Estimated 4 or more for sight seeing, photo taking, toilet , petrol if needed, etc ...

 

http://maps.google.com.sg/maps?hl=en&tab=wl

 

Attachment 260630

 

Attire : No Slippers No Sandals No Shorts No Bermudas

 

Personal Items to bring along :

Passport

T&G card

Spare key

Rain Gears

Money

Tools Kit if possible

Medcine if any

ROAD TAX**

(Pls inform the group of your medication if any)

A bottle of mineral water

 

Items can be shared :

Tire Aid Kit

First Aid Kit

 

BIKE Condition

 

Please ensure the bike is checked by UM mech for pulsar to ensure that the bike is in good condition

 

Who's going :

 

[Rider & Pillion

 

1: Uncle mj & wife

2: Atipo & son

3: Uncle Sam

4: Fircyber & wife maybe

5: Motor EA Trading

6: Fiddycent & jeng jeng jeng

7: Azhar

8: speedaddict + pillion

9: Gunnar J & pillion

10:

 

 

Note: We have 2 Country 1 Heart of a group of bikers from Spore and Malaysia to ride wif us during this trip.

[Strawberrydonut]

No choice I tyre puncture n tags e

Nearest workshop to my house.

Furthermore rushing to work also.. Haiz

yup i get what you mean,i also just service at my nearest motorshop when needed.

 

UM's really far from me

[Strawberrydonut]

yeah, for P200 and P180 UG4 the cheap and best combination is Dunlop TT900 90/80 in the front and Continental Conti Twist SM 130/70 for the rear.

I got that combination from Ah Boy for 120$

 

120 is for both front and rear? u fix at ah boy workshop? so was there any change in fc when you changed the tyres?

[Strawberrydonut]

guys any idea where to get my ug2 service manual?

[mjbs64]

guys any idea where to get my ug2 service manual?

 

 

u can try asking at UM for the manual book

 

for now maybe this can help ... its from UG2 manual but basically the same as UG3 n P200

 

left pic ug2 n right pic ug3

 

 

[revhappy]

120 is for both front and rear? u fix at ah boy workshop? so was there any change in fc when you changed the tyres?

 

120$ for both. Changed at Ah boy workshop, now their workshop is shifted to somewhere in geylang, haha. Impossible to locate unless the shop person accompanies you.

 

No difference in FC, even though now the rear tyre is wider that stock, it's profile is very curvy, so the contact patch on the road is narrower than before so theoretically my FC should now be better and I should be able to rev faster

[sumie]

Hi,

 

Anyone knows any good sprocket set(428) that is suitable for bajaj pulsar 180cc UG3 other than sinnob sprocket?

[robbedzombie]

No choice I tyre puncture n tags e

Nearest workshop to my house.

Furthermore rushing to work also.. Haiz

 

i also got punture through the sidewall before this set of battlax...

but didnt changed it so i just put tube inside and it worked for about 8+ months until it wore out and replaced it with a new set of battlax'es

[remy79]

i also got punture through the sidewall before this set of battlax...

but didnt changed it so i just put tube inside and it worked for about 8+ months until it wore out and replaced it with a new set of battlax'es

 

Aiya.. Y u nvr tell me b4 hand?

[revhappy]

Hi,

 

Anyone knows any good sprocket set(428) that is suitable for bajaj pulsar 180cc UG3 other than sinnob sprocket?

 

What is your definition of good? Ah boy has sprockets made in Thailand, company called Jomthai asahi. UM also stocks the same brand.This is good enough for normal usage.

 

If you are looking for Afam kind of sprocket then I don't think have. But you can check unique motors if they have Afam for Rxz. If it fits Rxz. It fits bajaj.

[revhappy]

i also got punture through the sidewall before this set of battlax...

but didnt changed it so i just put tube inside and it worked for about 8+ months until it wore out and replaced it with a new set of battlax'es

 

I read somewhere that you should not put tube inside tubeless tyre, don't know why, haha.

[revhappy]

i also got punture through the sidewall before this set of battlax...

but didnt changed it so i just put tube inside and it worked for about 8+ months until it wore out and replaced it with a new set of battlax'es

 

I read somewhere that you should not put tube inside tubeless tyre, don't know why, haha.

[FiddyCent]

UPDATES!

 

Pulsarians Singapore Roll Out .... Destination Southern Most Malaysia

 

A Day Road Trip To Tanjong Piai, Kukup & Pontian

 

Date:18th Nov 2012

Place of Gathering : GP Esso via Tuas Link

Estimated Time Start & End : 8.30am - NIGHT (9AM LEAVING ESSO)

Estimate Distance: Approx 232KM

Traveling Speed : varies from 60km/h - 100km/h

Pit Stop: Estimated 4 or more for sight seeing, photo taking, toilet , petrol if needed, etc ...

 

UPDATED ROUTE = http://goo.gl/maps/pT3Rx

 

 

Attire : No Slippers No Sandals No Shorts No Bermudas

 

Personal Items to bring along :

Passport

T&G card

Spare key

Rain Gears

Money

Tools Kit if possible

Medicine if any

ROAD TAX**

(Pls inform the group of your medication if any)

A bottle of mineral water

 

Items can be shared :

Tire Aid Kit

First Aid Kit

 

BIKE Condition

 

Please ensure the bike is checked by UM mech for pulsar to ensure that the bike is in good condition

 

Who's going :

 

[Rider & Pillion

 

1: Uncle mj & wife

2: Atipo & son

3: Uncle Sam

4: Fircyber & wife maybe

5: Motor EA Trading

6: Fiddycent

7: Azhar

8: speedaddict + pillion

9: Gunnar J & pillion

10:

 

 

Note: We have 2 Country 1 Heart of a group of bikers from Spore and Malaysia to ride wif us during this trip.

 

[ATTACH=CONFIG]262259[/ATTACH]

 

 

 

Cheers

[mjbs64]

Re: A Day Road Trip To Tanjong Piai, Kukup & Pontian

 

@Gunnar Jensen

 

can I hv ur mobile no ? .. mine at my signature tks

[revhappy]

Read on unique motors forum page, they have following:

 

AFAM Sprockets + EK Orange colour X Ring for KTM Duke 125 /200

$250 (Usual Price $340)

 

Wow! Duke just came and already so many accessories for it. Its quite expensive though, so out of my radar anyways, kekeke.

But those who are into beefing up their bikes and dont mind the price should look at the duke

[Strawberrydonut]

have a safe trip to those going for the trip! i wish i could haha but i never met anyone before and besides my trusty little workhorse won't be able to withstand that long distance i guess.

[Strawberrydonut]

guys mind i ask what kind of eo are you guys using for your bikes? i know this might be a repeat question but just wondering what kind of eo everyone uses

[revhappy]

I use motul 5100 semi. Syn 15w50 cost 16$ at powerwheel. I am not so fussy about eo. Even if you use the cheap mobil mineral it is ok just make sure to change every 2k kms

[rodrodrod]

Hey guys I just met with a minor accident and I need advices with regards to the repair and compensation matters.

 

The accident happened at a traffic light junction. Traffic light was showing a red light but green left turn signal. I was at the left lane, which is a lane to go straight and turn left. As I approach the traffic light, there was a van that stopped at the traffic light. I then went through the side to turn left and as I was going pass the van, the passenger door open and hit me, and I fell to the left.

 

My tank is now dent and the handle bar feels very low somehow. I have to rev trottle very hard to start my engine. The passenger decided to settle t privately. Oh yes, there's some paint peeled off at the tank.

 

What would be some of the repair works done to my damage and what's the estimated cost? Can the dent be knocked out? I do not want to exploit the passenger.

 

Thanks in advance for the advices

Edited November 18, 2012 by rodrodrod

[slacks]

Hey guys I just met with a minor accident and I need advices with regards to the repair and compensation matters.

 

The accident happened at a traffic light junction. Traffic light was showing a red light but green left turn signal. I was at the left lane, which is a lane to go straight and turn left. As I approach the traffic light, there was a van that stopped at the traffic light. I then went through the side to turn left and as I was going pass the van, the passenger door open and hit me, and I fell to the left.

 

My tank is now dent and the handle bar feels very low somehow. I have to rev trottle very hard to start my engine. The passenger decided to settle t privately. Oh yes, there's some paint peeled off at the tank.

 

What would be some of the repair works done to my damage and what's the estimated cost? Can the dent be knocked out? I do not want to exploit the passenger.

 

Thanks in advance for the advices

 

Hi there, hope that you are alright.

 

Firstly, did u suffer any injuries?

Secondly, since settle privately tell the guy to accompany you to the workshop and get the estimated cost of repairs from UM

Thirdly, If he refuse to pay for damages than do you have any photo to proof that the accident took place, and is cause by him?

[revhappy]

Hey guys I just met with a minor accident and I need advices with regards to the repair and compensation matters.

 

The accident happened at a traffic light junction. Traffic light was showing a red light but green left turn signal. I was at the left lane, which is a lane to go straight and turn left. As I approach the traffic light, there was a van that stopped at the traffic light. I then went through the side to turn left and as I was going pass the van, the passenger door open and hit me, and I fell to the left.

 

My tank is now dent and the handle bar feels very low somehow. I have to rev trottle very hard to start my engine. The passenger decided to settle t privately. Oh yes, there's some paint peeled off at the tank.

 

What would be some of the repair works done to my damage and what's the estimated cost? Can the dent be knocked out? I do not want to exploit the passenger.

 

Thanks in advance for the advices

 

Maybe need to change handlebar if it is bent. Tank also better to change if you need it to be as good as before. I would say set aside about 300$ for this.