Kawasaki KRR150 Riders

[hanrxk]

hello there,

i was just thinking of changing my clutchless x1 to kr. any comments?

n any one can help me quote the 2nd price of kr? n where is the best recommended shop?

shld i trade my bike for kr in a particular shop, or sell my bike to a friend or shop, den buy kr from another shop?

 

sory many qns bros?

[konaboyz87]

anyone done the dynojet at pleasure ubi?

[Blurzzz]

Originally posted by xia0vin@Dec 12 2006, 01:47 AM

where's bike production?

serangoon...

after mustafa... on your right...

[Blurzzz]

Originally posted by [3]`chUn@Dec 12 2006, 05:13 AM

u innocent?

 

did i heard wronly ?

 

tat time who bring gal hm =X

wahahaha...

no one call me 2 confirm...

[Blurzzz]

Originally posted by CK_86@Dec 12 2006, 10:21 AM

he loner nowadays... lol...

 

i need 2 work and i need rest lor...

[Blurzzz]

Originally posted by hanrxk@Dec 12 2006, 02:39 PM

hello there,

i was just thinking of changing my clutchless x1 to kr. any comments?

n any one can help me quote the 2nd price of kr? n where is the best recommended shop?

shld i trade my bike for kr in a particular shop, or sell my bike to a friend or shop, den buy kr from another shop?

 

sory many qns bros?

go find the bike u like at any shop...

then sell your bike 2 owner... can fetch better price than trade in...

[iman87]

Yo guys,

 

I just changed my taillight to the 3in1 version. Found out that my tailboard fairing cant close properly. Also theres a gap between the pillion seat and the tailboard

 

1) How do i actually lower my pillion seat so that the gap will be closed nicely?

 

2) As for the taillight, i need to file it to fit nicely right?

 

Thanks in advance guys

[xsebastx]

o.0

just did a full servcing for 220.. i'm ready to fly again

[zongbao]

lol.. here machiam all racer.. not like my bike.. slow bike.

[OhMiGosh]

Originally posted by iman87@Dec 12 2006, 05:32 PM

Yo guys,

 

I just changed my taillight to the 3in1 version. Found out that my tailboard fairing cant close properly. Also theres a gap between the pillion seat and the tailboard

 

1) How do i actually lower my pillion seat so that the gap will be closed nicely?

 

2) As for the taillight, i need to file it to fit nicely right?

 

Thanks in advance guys

i'll answer to both of your questions..

 

first of all yes you need to cut using the circular kind of cutter which is normally done by the bike shop.. if they are lazy normally they do a slip-shot work which is anyhow cut then put in.. that causes ur fairing to unable to close properly leaving gap in between the fairing and also making ur seat look as if its not fully closed.

 

2ndly after they cut liao they still have to put a long spring under the tailight area to secure both sides of the fairing so that it would not look like its split-opened which also will affect the top part and thus causing i to look like your seat could not be closed properly .

 

the other time i brought my friend to Eddy Ong to get it done as the bike shop he went to install the 3-in 1 didnt did a good job.. i am scolded by hahah!

he said that it takes quite some work and time to do the job as u need to cut then fix to try and if cannot cut again.. thats why normally the people who fix do a slip-shot work of it. haha he told me next time not to bring ppl to do that thing again.. wat he say was if people he dunno go there to ask him do.. he rather not earn that money as it is very troublesome....

 

*disclaimer*- my 2 cents worth of advice.

[OhMiGosh]

Originally posted by zongbao@Dec 12 2006, 05:55 PM

lol.. here machiam all racer.. not like my bike.. slow bike.

no leh .. i am not.. my bike for singapore road only.. i not racer i adher to traffic rules strictly

[OhMiGosh]

Originally posted by hanrxk@Dec 12 2006, 02:39 PM

hello there,

i was just thinking of changing my clutchless x1 to kr. any comments?

n any one can help me quote the 2nd price of kr? n where is the best recommended shop?

shld i trade my bike for kr in a particular shop, or sell my bike to a friend or shop, den buy kr from another shop?

 

sory many qns bros?

firstly its nt up to us to say anything.. its what u really want .

 

1.if u want to use your bike as transport only.. what i reccomend is that you stick to your X1.. if u want something more power then go ahead with your KRR..

 

2. its hard to tell the price.. depending on the plate ... since you are going to get from bike shop, it can easily cost $2800 - $3500 inclusive of insurance la.. and fees.. gst... etc.. for a 1-2 yr bike . might be more .. .. go get quotation around a few shops.. and get someone who is familliar to go with you to check out things like engine.. steering cone bearing.. brakes... etc....

 

3.is your x1 fully paid? or still got installment? of cus pushing in a bike shop will fetch u a lower price then selling it to a friend.

 

hope your questions are answered.. price wise i not really sure but its roughly around the price..

 

 

*disclaimer* - my 2 cents worth of advice.. dont come flame me if i get it wrong

[OhMiGosh]

Originally posted by Blurzzz@Dec 12 2006, 05:19 PM

no one call me 2 confirm...

lol u are the "gal" that he fetch home ? hahah . looks like secrets spread like wildfire here

[xsebastx]

Originally posted by OhMiGosh@Dec 12 2006, 06:06 PM

no leh .. i am not.. my bike for singapore road only.. i not racer i adher to traffic rules strictly

o.0 i also obey to traffic rules leh.. haha

[OhMiGosh]

Originally posted by konaboyz87@Dec 12 2006, 10:13 AM

bike production is on serangoon road. NOT upper serangoon. there also got quite a few bike shops too... bike production sell bike very attitude..

err.. i would like to advice you.. as you know.. what u type might get you into trouble.. alot of people are watching the forums.. u know... from bike shop too .. so.. tk care in what you type as it might get you into legal implications.

[compfused]

Originally posted by iman87+Dec 12 2006, 05:32 PM-->

QUOTE (iman87 @ Dec 12 2006, 05:32 PM)

Yo guys, 1) How do i actually lower my pillion seat so that the gap will be closed nicely?[/b] Use a file and lots of patience..Mine is almost shut..No gaps whatsoever..Will get a pic of it when my cam works..

[konaboyz87]

Originally posted by konaboyz87@Dec 12 2006, 05:05 PM

anyone done the dynojet at pleasure ubi?

nobody did?

[OhMiGosh]

Originally posted by xsebastx@Dec 12 2006, 06:16 PM

o.0 i also obey to traffic rules leh.. haha

today while coming home, i saw a huge fuking lorry just chiong red light... lucky the junction's traffic was light.. if a biker like us smash into it.. gg liao .. these lorries might be taught a lesson sia

[OhMiGosh]

Originally posted by konaboyz87@Dec 12 2006, 06:18 PM

nobody did?

u trying to make people laugh har? 2b bike go dyno... errrrr? i dunno la.. for u maybe.. but i dont think most of us would do it.

[OhMiGosh]

Originally posted by compfused@Dec 12 2006, 06:18 PM

Use a file and lots of patience..Mine is almost shut..No gaps whatsoever..Will get a pic of it when my cam works..

 

 

I filed mine again after it has been installed..It fits nicely now..Maybe when I'm not lazy I'll take it out again to make it perfect..

 

Have fun..

aye.. fellow emo-ranger.. if u are lazy can always send to bike shop be it in sg or msia.. they'll do it for u for a small sum of money la.. but always go back to the shop that fix it for u and they'll do it for free if u complain to them as they already charged u labour fee so i dont see a point why they cant do a good job when they charge u for the item and also additional labour fee.

[konaboyz87]

Originally posted by OhMiGosh@Dec 12 2006, 06:20 PM

u trying to make people laugh har? 2b bike go dyno... errrrr? i dunno la.. for u maybe.. but i dont think most of us would do it.

last time i wanna buy sp got many of them got do ma.

[xsebastx]

Originally posted by OhMiGosh@Dec 12 2006, 06:19 PM

today while coming home, i saw a huge fuking lorry just chiong red light... lucky the junction's traffic was light.. if a biker like us smash into it.. gg liao .. these lorries might be taught a lesson sia

well, recently my fren who rode a ktm was on his way to pasi gudang then juz step out of his estate kana bang by a lorry.. so sad

[hanrxk]

thks omigosh.

n btw which is better in term of speed n stability? krr or sp?

n which is better, 1 swing arm or 2 swing arm?

[OhMiGosh]

Originally posted by konaboyz87@Dec 12 2006, 06:23 PM

last time i wanna buy sp got many of them got do ma.

err ok.. then i dunno liao .. cause most of the ppl i know who do dyno normally is riding cl2 bikes..

[OhMiGosh]

Originally posted by hanrxk@Dec 12 2006, 06:34 PM

thks omigosh.

n btw which is better in term of speed n stability? krr or sp?

n which is better, 1 swing arm or 2 swing arm?

errrrr in terms of stability i would tell you SP as its heavier.

 

if you were to compare top speed.. as in both bikes in stock condition without any mods.. KRR will be faster as it is lighter....