Kawasaki KRR150 Riders

[bLuEicE__11]

Originally posted by Slize@February 01, 2007 01:31 am

hey sorry juz wanna kpo kpo see whether he got jio u all... haha.. atleast he ask u all nicely.. u all should go the sp thread see how he jio SP riders.. like got a hate for the bike..

haha should organise a nation wide search.. then smoke him to death... lolz...

he not onli jio SP & KR but RVF also... haha... this fella super joker...

[mystery rider]

Originally posted by alvin8787@January 31, 2007 02:11 pm

but i see ppl use kehin with original air box b4!!any 2nd hand lobang..just put 4 fun...may b will sell bike depend on my job..now jobless!

i have been asking tis since the first post u ask about k&n.

i am going to ask again..

Q: is ur kehin carb model pwk?

 

original airbox? maybe he is using sp original kehin carb....

[weiyong08]

Originally posted by krazyfist@February 01, 2007 12:30 am

what part crack? cant even see the crack..highlight lah dey...

The side fairing crack. I attached the pix is to ask hw much it cost to paint exactly one side of the fairing with the design

[mystery rider]

wah....!

 

i think nobody like ah xiong(bear独孤求败) the 1 who when over to ppl house speak loud!

ultimately i believe action speak louder then words!

 

really looking forward to see how fast his TZM can be!

or..

he is just like wat ppl said! he still have not met a really fast sp or kips!

but at least he mention tis be4 "friendly race"!

still not so bad...

guys lets just forgive & forgot la!

[mystery rider]

Originally posted by weiyong08@February 01, 2007 11:13 am

The side fairing crack. I attached the pix is to ask hw much it cost to paint exactly one side of the fairing with the design

spray 1 side fairing onli huh?

 

the xXx airbrush 1 rite? if not onli 1 colour tone should be quite cheap!

or u can choose the xXx on the side u spraying to use sticker..

hmm..

can look for "ah pek" to do the sticker for u then all u need to do is onli get the base "white" spray & cover the crack loh!

[compfused]

Originally posted by krazyfist+February 01, 2007 12:35 am-->

QUOTE (krazyfist @ February 01, 2007 12:35 am)

kwang kwang kwang.. btw, i was relaxing at ang mo kio when i realised there's this chinese dude on his tzm..trying to kickstart his bike but fail..and he keep kickstarting for almost 30-35 min...hahaha..i don wanna help coz b4 that he got this arrogant look he gave me when i smiled at him...   SERVE HIM RIGHT!....kwang kwang kwang...[/b] So bad..Maybe should have helped him push his bike into the drain..Ahaha..   Originally posted by dyingxatheist@February 01, 2007 12:44 am But actually, I've yet to see a kr that is really modified. At most, the changes are cosmetics (and very poorly thought through at times). Don't say cosmetics la..Say enhancement..

[rycel]

Originally posted by krazyfist@February 01, 2007 12:35 am

kwang kwang kwang.. btw, i was relaxing at ang mo kio when i realised there's this chinese dude on his tzm..trying to kickstart his bike but fail..and he keep kickstarting for almost 30-35 min...hahaha..i don wanna help coz b4 that he got this arrogant look he gave me when i smiled at him...

 

SERVE HIM RIGHT!....kwang kwang kwang...

lol fist, scarly he have been kickstarting for the past 30mins without knowing that he did not on his engine-run switch. HAHA

[uehara87]

he shld have on his choke after the 1st 5min lor.. alrdy quite pek cek liao.. haha... he very patient la lols

[Cerius]

lol i kickstart 3-5 time nv start i on choke le impatient

[compfused]

Originally posted by Cerius@February 01, 2007 01:05 pm

lol i kickstart 3-5 time nv start i on choke le impatient

I kickstart once or twice normally can already but dunno why everytime park at bike shop for sometime then always hard to start..It only happens when I'm at a bikeshop..Never happens in the mornin when I wanna go to work..

[krazyfist]

Originally posted by weiyong08@February 01, 2007 11:13 am

The side fairing crack. I attached the pix is to ask hw much it cost to paint exactly one side of the fairing with the design

ooh..if u want the fairing to be paint job also quite expensive..getting a normal balck colour fairing could be availabale at LAB..but i cant quote u the price..

[krazyfist]

Originally posted by rycel@February 01, 2007 12:20 pm

lol fist, scarly he have been kickstarting for the past 30mins without knowing that he did not on his engine-run switch. HAHA

hahaha..maybe his spark plug wet..can be too...anyway stupid and arrogant tzm rider..

[dyingxatheist]

Originally posted by compfused@February 01, 2007 11:51 am

Don't say cosmetics la..Say enhancement..

 

 

So feerce.. Mind impartin abit of your skills to me? I never corner or even speed..Can ask Peepot..That's why my valve always jam here and there..

enhancements??? errr...

 

haha don't bluff okay. I'm pretty sure you speed at the very least. I don't play corners... dangerous... Saw my friend went down cornering and then go over the road divider... waaarrrhhhhhh I'm gonna ride safely from now on............

[compfused]

Originally posted by krazyfist+February 01, 2007 01:38 pm-->

QUOTE (krazyfist @ February 01, 2007 01:38 pm)

ooh..if u want the fairing to be paint job also quite expensive..getting a normal balck colour fairing could be availabale at LAB..but i cant quote u the price..[/b] When was that? The last I checked they only have stock colours..And black wasn't one of them..

[Cerius]

Originally posted by compfused@February 01, 2007 01:08 pm

I kickstart once or twice normally can already but dunno why everytime park at bike shop for sometime then always hard to start..It only happens when I'm at a bikeshop..Never happens in the mornin when I wanna go to work..

can say every morning i go sch confirm must on choke to start one -.-

[stickyfingers]

did any of you guys cut the stomach? the part that everytime rusts?

cause i went to the shop and the recommend to cut so and take out the 'nests' so it wont rust. does it work? p-plater here la.

 

and any place to rec cheap and good paintwork? black and lacquer only. and gd place to service?

[phase_one]

Originally posted by stickyfingers@February 01, 2007 06:34 pm

did any of you guys cut the stomach? the part that everytime rusts?

cause i went to the shop and the recommend to cut so and take out the 'nests' so it wont rust. does it work? p-plater here la.

 

and any place to rec cheap and good paintwork? black and lacquer only. and gd place to service?

change straight to chamber pipe lor.. sure shiok one.. lol..

[alvin8787]

Originally posted by mystery rider@February 01, 2007 10:50 am

i have been asking tis since the first post u ask about k&n.

i am going to ask again..

Q: is ur kehin carb model pwk?

 

original airbox? maybe he is using sp original kehin carb....

just back from MOTOWORLD...don't have KNN air filter 4 kehin 35mm!!! :cry:

(Need some advise)Now i connect carb n air box with 1 big rubber(see the photo)..but i think totally don't put air filter can feel more better,since the air box got no sponge inside!!(i never put air filter 4 PE39mm carb on my LC 125 last time) but i heard will spoilt the piston ring n block!!!

[alvin8787]

Originally posted by mystery rider@February 01, 2007 10:50 am

i have been asking tis since the first post u ask about k&n.

i am going to ask again..

Q: is ur kehin carb model pwk?

 

original airbox? maybe he is using sp original kehin carb....

another photo from left

(Need some advise)Now i connect carb n air box with 1 big rubber(see the photo)..but i think totally don't put air filter can feel more better,since the air box got no sponge inside!!(i never put air filter 4 PE39mm carb on my LC 125 last time) but i heard will spoilt the piston ring n block!!!

[XeoN]

Anyone wan to meet up tonite? Interested pls sms me @91195647.Thanks

[compfused]

Originally posted by alvin8787+February 01, 2007 07:23 pm-->

QUOTE (alvin8787 @ February 01, 2007 07:23 pm)

just back from MOTOWORLD...don't have KNN air filter 4 kehin 35mm!!! :cry: (Need some advise)Now i connect carb n air box with 1 big rubber(see the photo)..but i think totally don't put air filter can feel more better,since the air box got no sponge inside!!(i never put air filter 4 PE39mm carb on my LC 125 last time) but i heard will spoilt the piston ring n block!!![/b] Go mototworld never jio me..I stay near..Can meet lim kopi or can let me see see touch touch your bike..Next time go jio me la..

[Uptown_boy]

Originally posted by stickyfingers@February 01, 2007 06:34 pm

did any of you guys cut the stomach? the part that everytime rusts?

cause i went to the shop and the recommend to cut so and take out the 'nests' so it wont rust. does it work? p-plater here la.

 

and any place to rec cheap and good paintwork? black and lacquer only. and gd place to service?

how much dey charge u for taking out the 'nest' ?

[XeoN]

Originally posted by compfused@February 01, 2007 07:46 pm

You come my place then I go..Ahaha..

Dont Lazy lar.

[compfused]

Originally posted by XeoN@February 01, 2007 08:20 pm

Dont Lazy lar.

What to do..I think my ram damage already..Exam so near study study revise here and there but when want to do my mind all blank..Look at question and can tell that I got do before but when want to do all blank..Die already la..

 

Your fairings collect already?

[at0m87]

Originally posted by AH^_^PEK^_^LAH@January 31, 2007 09:43 pm

anyway just a transport nia

gt time to b angry with him might as well

shout

ATOM87 OEiiiiiiiiiiiiiii

 

when JIO KAWA OUTING

B4 CNY .....

LOL soon la... dun worryy, i will be super damn free, i need a job man.!