Aprilia Riders

[priller07]

TK, i have a question. U know of any mechs that can really tune Keihin carbs?

[blast3dGaL]

both of u ar.... like to bring your personal problems to the thread yknow.

 

not exactly like what you think.. nothing of that sort.. just something more personal, and that's the only way i can put it.. maybe shouldnt even post it.. my fault.. i guess..

 

Wah.....so fast give up liao ah...what happened? Found new target or passion for next part of your life?

 

not really.. just typical enuff to not being able to afford it after losing my old job.. i know i should never blame the economic crisis.. but that really is causing a lot of inconvenience..

[Sub Zero]

Highest possible spec are as follows:

1)Matris M05R est ard sgd 2k

2) Wilber est ard sgd1.5k

3) Ohlins TTX (avalible thru certain dealers only as it a customised model for Aprilia RS125) sgd 3-4k

4) Penske sgd2.2

5)WP est 1.3-1.5k

6)FG te?????? 1.5-1.7k sgd

The above shocks comes with high/low speed damping etc and are similar in performance and mostly are factory customised for individual rider taken into consideration rider weight , bike weight , riding style , riding conditions etc when taking orders. Customised orders and requirements can be done if requsted when ordering..

High end shocks retain its peak performace when serviced only by FACTORY , not some trained suspension servicing guy . so be prepared to pay a 100-200 hundreds more to air freight it back to factory for servicing every 1-2yrs

 

Budget adjustable ard 1k or

1)sach 700-800sgd

2)bituo 700-80sgd

3) Nitron 700-800sgd

4) ohlins base model 1100-1250 sgd

 

 

A good rear mus mate with a good fork to maximise performance.

 

Ohlins front/rear suspension set are good enough for most road conditions

Only matris offer front cartilge & rear shock plus damper set for aprilia RS125

Marozchi offer a adjustble front fork for 06

 

Thank you boss!!! You are the man!!

 

Can i ask, the Sach and Bitubo are adjustable in what way??

 

And what is the cost of the Matris cartridges? From what I know, it's about 1.4K.

 

How to get Ohlins front for our rs125? Do they make?

[brandon.]

wtf , shadantou , you push me off the podium. Anyone else before i claim 4th ?

[shadantou]

hehe. but im the first rs125 that motovation installed the sliders themselves. so i was like a tester bike for them.

 

somemore my front wheel slider do not fit as mine was 2009 version. they had to take measurements and custom make a new one for me. whats ur model type? if 09 need to tell them in advance.

[brandon.]

oic , so why yours is 300+ and hybrid told me 220+ because yours they had to custom make it? but i thought all along is custom ? mine 06.

[brandon.]

wow tknge , your bike so clean. not even abit of rust. u use wd40?

[shadantou]

mine is frame slider ( for both side fairing ) 220. and fork & axle slider ( for both sides of front wheel and back wheel ) = 130. total 350. installation is free if u buy the whole set. i guess hybrid only installed the fairing set.

 

i can bring u to motovation to have it install if u want the full set. =)

 

okie here's the difference, for 09 version, for my front wheel the screw is hollow, they can literally install the sliders without any tools just slot in and screw tight. for 06-08, screw is not hollow, so they got to screw the slider to the nut itself. after they installed mine, found that the front wheel slider not kissing the screw.

 

hard to describe but thats the difference. next time meet up can show u.! =)

[brandon.]

Okay thanks for explaination , quite clear enough. so 1.5 months has passed , still adoring the bike? =x

[shadantou]

yes. loving it to bits. love this bike, love fellow aprilians, love outings with aprilians!

 

but still hating mah. lol!

[brandon.]

anyway , u know which website to buy the speedo sensor?

[Sub Zero]

We will meet soon when there is a meet up again....

 

 

Will msg u next time when we meeting up dude. looking forward to seeing ur bike in person.

[shadantou]

anyway , u know which website to buy the speedo sensor?

 

nah bro brandon.

 

no idea man. whats that anyway?

maybe bro sub-zero will have the answer.

 

he's my mr know-it-all at the moment. LOL!

[brandon.]

lol yea , i sought his help a couple of times before. Mr-Know-it-all , would you mind the link ? ;x

[Sub Zero]

http://www.ultimateparts.net

 

I assume you're looking for the speedo sensor for the 06 model onwards that is mounted on the rear brake caliper bracket?

[brandon.]

Exactly Subby. Thanks man.

[brandon.]

Sorry for spam , is it under Electrical systems?

[priller07]

Sorry for spam , is it under Electrical systems?

 

Rear brake caliper section, for the speedo sensor..

 

http://www.ultimateparts.net/shop/category.php?id=17854&n=Aprilia-RS-125-2006-2007-Rear-brake-caliper

[brandon.]

Thanks man!

[hybrId]

mine is frame slider ( for both side fairing ) 220. and fork & axle slider ( for both sides of front wheel and back wheel ) = 130. total 350. installation is free if u buy the whole set. i guess hybrid only installed the fairing set.

 

didn't alvin tell u tt the free installation is only for podium positions only? 4th or later will hv to pay. =P

[quikslvr]

Thank you boss!!! You are the man!!

 

Can i ask, the Sach and Bitubo are adjustable in what way??

 

And what is the cost of the Matris cartridges? From what I know, it's about 1.4K.

 

How to get Ohlins front for our rs125? Do they make?

 

ive posted this before long time ago but if u have 5000USD to blow i respect you.i emailed the local ohlins distributor here and ohlins can make custom shock or forks for us.i cant remember if i asked rear shocks or forks heh..

 

RR 125 GP2 Front Fork System

http://www.accu-products.com/images/uploads/ohlins_gp2.jpg

 

http://www.accu-products.com/images/uploads/ohlins_gp2.jpg

[younggoonz]

Guys, need some advise if u encountered same problem with my bike.When i try to power on suddenly the battery voltage dropped from 10.8v to 6.3v. is this battery problem? my bike just 5 mons old...

[brandon.]

hybrid , LOL. see shadantou , your fault. Now , you will pay my installation charges for pushing me off the podium. anyway you guys know @ around the brake level area ,there's like a cable connect to it right? i went and pluck it out , and now when i press brake both front and rear , there's no brake light. the input to slot it back is so small.

[Sub Zero]

ive posted this before long time ago but if u have 5000USD to blow i respect you.i emailed the local ohlins distributor here and ohlins can make custom shock or forks for us.i cant remember if i asked rear shocks or forks heh..

 

RR 125 GP2 Front Fork System

http://www.accu-products.com/images/uploads/ohlins_gp2.jpg

 

http://www.accu-products.com/images/uploads/ohlins_gp2.jpg

 

Isa.. Very nice.. USD500 is very affordable dude. Stock forks are more expensive.

 

Is this specifically the Ohlins forks for the RS125? Is it adjustable in anyway?

 

Thanks

[WawanAprilia]

Isa.. Very nice.. USD500 is very affordable dude. Stock forks are more expensive.

 

Is this specifically the Ohlins forks for the RS125? Is it adjustable in anyway?

 

Thanks

Its 5000 USD dude ....