Yamaha TZM 150 Riders

[hohosaint]

Originally posted by supafly@Jun 3 2005, 07:17 AM

ive got 2 options now... both are fn plate... 1 for 2k the other for 2.5..... of cos im gonna ceck the bikes out.... hmm..... well... im not in a hurry anyway... havent even make my license yet! hahahahakkz~!

 

p.s. oh yah she said the coe still long way to go. but getting a good bike at dat price... i dun mind paying the coe..! hahahahkz!

Since you mentioned good bike. Check it out thoroughly. Ensure the "Engine" is in running condition for the next few thousand km. 2k is acceptable for FN plate (private deal). But if it belongs to motortiam. Interests, admin charges and others will be added up later on part. So, pay one shot is the best.

[hohosaint]

Anyway supafly. If the bike comes with most recent replaced parts (piston, block, steering bearings, reel valve, battery, YPVS wires, spockets, chain and tires etc) and accessories (whereby need to custom make like single sit, rgv swing arm). Is a good buy. I mean... Owner must take care of bike and ensure bike is in running condition before he/she sells the bike away. Am i right?

[hohosaint]

Anyway ppl... I am not here to spoil others deal... But to make you gain something out of the deal. Always estimate the amount you need to standby to replace the parts before risking it.

[speedkills]

supafly which motordiam is that u buying from? jus make sure its not albert... :mad:

[SweetChild]

Originally posted by hohosaint@Jun 3 2005, 08:49 AM

If FT plate TZM selling at 7K at most motortiam. Then your 2.5k could be a good pick. But if most TZM at motortiams selling around 6K. Ask for some discount. (I always judge the motor condition for pricing one, using this policy $$ seems abit extra leh )

beb ft plate u say 7k otr is it? coz i went to bike shop they say 5k for ft....

[hohosaint]

Originally posted by WanNavaro@Jun 3 2005, 01:04 PM

beb ft plate u say 7k otr is it? coz i went to bike shop they say 5k for ft....

Which motorshop quoted you 5k?

[speedkills]

why always suddenly so quiet...... haiyoh... :bounce:

 

someone organise outing mah!!

[hmmm]

beb ft plate u say 7k otr is it? coz i went to bike shop they say 5k for ft....

 

 

Wah wanNavaro tats a gewd price for an M... 5 k power.... but then muz see the condition ah....

[hohosaint]

Originally posted by hmmm@Jun 3 2005, 04:15 PM

 

Wah wanNavaro tats a gewd price for an M... 5 k power.... but then muz see the condition ah....

If engine in good condition. Quite a "rare" grab... I would say.

[phill]

2k is gd deal !!

 

then spend another 3k spare for overhaul...

 

best bring to jb... 3k sgd can do wonders....

[MiLeNkO]

when i buy my bike

FT plate with accessories and marlboro paintwork!!!!!!!!!

4.8k :cry:

over my budget ahahha

[hohosaint]

Originally posted by MiLeNkO@Jun 3 2005, 05:22 PM

when i buy my bike

FT plate with accessories and marlboro paintwork!!!!!!!!!

4.8k :cry:

over my budget ahahha

Where did you buy?

[DeViLiSh]

hi ppl. sorry i jus moved to my new place at kallang bahru, no internet yet so can only use during lunchtime n silent hours at work.

 

wah u all got so many questions ah? si liao la! cannot answer all of em now cos gotta go home soon hehehe

 

i accompanied quovadis to collect his bike from albert e other day. bloody muthafarkers all of em. i had to act gangster to e gundu salesman in spects n his ah-lao mechanic whose got an attitude prob. while we were there, there was a group of 4 malay guys also quarelling with him regarding a bike or something, didn't quite hear them well. i had to tekan them to change e clutch n throttle cable then they change, but even so e throttle cable they change w another defective one, damn. qouvadis, u have to be more garang towards them, don't give them face. they owe u a lot of servicing. u better keep on going there n each time they give a stupid excuse, fark them up n tell them u'll report to CASE. tell them u'll slap them with a civil suit if u wanna go to e extreme hehehe. after they've paid their dues, then move on to HKL jus few doors down. greet ah bee who is e boss n treat his ah-ma politely and u'll be in his green list hehehe. don't forget to ask for freebies too, if he give one dun shy-shy to ask one more hahaha!

 

market price for tzm ft plate-$4.5K, FN-FP-$3.5K. prices courtesy of bike production 610 s'goon rd. with plus-minus $500 of course. a lot of factors to be taken into consideration, but these prices are a good guide. if they sell more or less than $500 than e prices above, make sure u open ur eyes n mouth wider.

 

tyre pressure- for stock 90/80 front n 110/80 rear, manufacturer's recommended pressure will be 200kpa front n 220kpa rear. i personally prefer an extra 20kpa each due to my long distance travelling n hard cornering. remember that e harder u pump, e more wobbly e corner, e softer u pump, e more wobbly ur straight-road speeding. following e recommended pressure with plus-minus 20kpa would be in e safe zone. try on different pressures n see what suits u. don't worry- i ever pumped a set of HKR tyres 300kpa ea n tried it out for a week. damn shiok during top-end n with a pillion i tell u! but cornering very wobbly. one more thing, e recommended tyre pressure will surely be stated on e tyre itself. u have to use a torchlight n look for it carefully or even better, a white or yellow paint marker to colour it out clearly.

 

ok that's all for now. happy Menjerit-ing!

[speedkills]

woah....his post classic one..always like write novel..heh...

 

but good lar...more activities on TZM forum!!!!! yeahh

 

tmr i gg down bike production...anyone wanna come?

 

can call me... 91060925 samuel

 

i'll be ther arnd 1pm

[RedHare]

Originally posted by DeViLiSh@Jun 3 2005, 06:52 PM

hi ppl. sorry i jus moved to my new place at kallang bahru, no internet yet so can only use during lunchtime n silent hours at work.

 

wah u all got so many questions ah? si liao la! cannot answer all of em now cos gotta go home soon hehehe

 

i accompanied quovadis to collect his bike from albert e other day. bloody muthafarkers all of em. i had to act gangster to e gundu salesman in spects n his ah-lao mechanic whose got an attitude prob. while we were there, there was a group of 4 malay guys also quarelling with him regarding a bike or something, didn't quite hear them well. i had to tekan them to change e clutch n throttle cable then they change, but even so e throttle cable they change w another defective one, damn. qouvadis, u have to be more garang towards them, don't give them face. they owe u a lot of servicing. u better keep on going there n each time they give a stupid excuse, fark them up n tell them u'll report to CASE. tell them u'll slap them with a civil suit if u wanna go to e extreme hehehe. after they've paid their dues, then move on to HKL jus few doors down. greet ah bee who is e boss n treat his ah-ma politely and u'll be in his green list hehehe. don't forget to ask for freebies too, if he give one dun shy-shy to ask one more hahaha!

 

market price for tzm ft plate-$4.5K, FN-FP-$3.5K. prices courtesy of bike production 610 s'goon rd. with plus-minus $500 of course. a lot of factors to be taken into consideration, but these prices are a good guide. if they sell more or less than $500 than e prices above, make sure u open ur eyes n mouth wider.

 

tyre pressure- for stock 90/80 front n 110/80 rear, manufacturer's recommended pressure will be 200kpa front n 220kpa rear. i personally prefer an extra 20kpa each due to my long distance travelling n hard cornering. remember that e harder u pump, e more wobbly e corner, e softer u pump, e more wobbly ur straight-road speeding. following e recommended pressure with plus-minus 20kpa would be in e safe zone. try on different pressures n see what suits u. don't worry- i ever pumped a set of HKR tyres 300kpa ea n tried it out for a week. damn shiok during top-end n with a pillion i tell u! but cornering very wobbly. one more thing, e recommended tyre pressure will surely be stated on e tyre itself. u have to use a torchlight n look for it carefully or even better, a white or yellow paint marker to colour it out clearly.

 

ok that's all for now. happy Menjerit-ing!

Eh bro I stay at Kallang Bahru also le. Haha next time can have coffee section.

[supafly]

ehk thanx hoho for the tips. anyway its a private deal.... havent checked it out tho... hahahahakz! heck i h vaent even make my license.. wakakakak!

[MiLeNkO]

Dr. Tzm is back

 

kallang bahru near punggol!!! can kopi there lavender food market? aahaha

 

 

 

 

 

my bike bought at bike production

just took the bike and go

 

servicing all go other place

that shop only know for good prices

others cmi

freebies also only give u chiong gpr helmet

[supafly]

kallang bahru near punggol?

[funkymunky84]

Originally posted by DeViLiSh@Jun 3 2005, 06:52 PM

hi ppl. sorry i jus moved to my new place at kallang bahru, no internet yet so can only use during lunchtime n silent hours at work.

 

wah u all got so many questions ah? si liao la! cannot answer all of em now cos gotta go home soon hehehe

 

i accompanied quovadis to collect his bike from albert e other day. bloody muthafarkers all of em. i had to act gangster to e gundu salesman in spects n his ah-lao mechanic whose got an attitude prob. while we were there, there was a group of 4 malay guys also quarelling with him regarding a bike or something, didn't quite hear them well. i had to tekan them to change e clutch n throttle cable then they change, but even so e throttle cable they change w another defective one, damn. qouvadis, u have to be more garang towards them, don't give them face. they owe u a lot of servicing. u better keep on going there n each time they give a stupid excuse, fark them up n tell them u'll report to CASE. tell them u'll slap them with a civil suit if u wanna go to e extreme hehehe. after they've paid their dues, then move on to HKL jus few doors down. greet ah bee who is e boss n treat his ah-ma politely and u'll be in his green list hehehe. don't forget to ask for freebies too, if he give one dun shy-shy to ask one more hahaha!

 

market price for tzm ft plate-$4.5K, FN-FP-$3.5K. prices courtesy of bike production 610 s'goon rd. with plus-minus $500 of course. a lot of factors to be taken into consideration, but these prices are a good guide. if they sell more or less than $500 than e prices above, make sure u open ur eyes n mouth wider.

 

tyre pressure- for stock 90/80 front n 110/80 rear, manufacturer's recommended pressure will be 200kpa front n 220kpa rear. i personally prefer an extra 20kpa each due to my long distance travelling n hard cornering. remember that e harder u pump, e more wobbly e corner, e softer u pump, e more wobbly ur straight-road speeding. following e recommended pressure with plus-minus 20kpa would be in e safe zone. try on different pressures n see what suits u. don't worry- i ever pumped a set of HKR tyres 300kpa ea n tried it out for a week. damn shiok during top-end n with a pillion i tell u! but cornering very wobbly. one more thing, e recommended tyre pressure will surely be stated on e tyre itself. u have to use a torchlight n look for it carefully or even better, a white or yellow paint marker to colour it out clearly.

 

ok that's all for now. happy Menjerit-ing!

wah bro two thumbs up for u :thumb:

The saleman name is Andrew and the mechanic.. the fat useless fark

that fella's name is royston. dye hair... useless babi..

good work bro...

 

And yeah, HKL good ah. Ah bee v frendly... that time my bike batt flat 3 days aft i buy from Albert... knn.. but lucky for me my batt die at queesway shopping centre... Unfortunately Albert Motors was closed... so i went to HKL to ask for help adn Ah Bee was kind enuff to lend me a screw driver to check my fuse..

 

Then, fuse nothing wrong lah, its the batt so i went over and had my batt changed there... HKL service ok lah but a word of caution though...always go talk to ah bee abt the pricing and stuff coz the mechs there like to 'chop' ppl..

 

Anyway, Quovadis gd luck for u bro.. er...

er... one day outing lah.. mini outing go JB or smthing.. fix bike

SP rider here btw.. sorry to intrude again ah..

[SweetChild]

Originally posted by hohosaint@Jun 3 2005, 01:23 PM

Which motorshop quoted you 5k?

all of e shops i go....

[medichloreans]

hi guys..

im from malaysian...

using TZM..

 

wah..

second tzm in sg is more valuable than malaysia...

second hand tzm in malaysia sold only MYR3.5k n below...

[speedkills]

hi and welcome...msia got lotsa nice tzm! heh=)

 

anyway today i went to a shop at bendemeer..forgot name..TZM FS plate 6.5k. the bike the fellow told me changed everything back to new parts including block and piston:giddy:

 

its looks new then i saw a scratch mark on the gear level and asked if the bike buang before he said yah and look kinda sheepish then he kept assuring me that every part changed already to new part. FS 4762

 

but he say 6.5k exclude insurance...so i dunno wad else he will charge. heh..quite interesting day.....gian me only...... :lovestruck:

 

the shop is the one by the road junction beside bike production.

[MiLeNkO]

firstly, i'd like to thank who ever is up there for that i'm safely here writing this post.

 

my unburnt 2t (from pipe) always drip to my tires after a period of time so somehow i decided to clean my rear tires in the afternoon today.

 

was along serangoon road on the way home.

 

wanted to overtake a car infront of me

so i slowly moved to the left.. den picked up speed

 

a lorry infront of me quite far away lets say half a basket ball court suddenly e brake. den i saw the traffic light. was red.

 

IMMEDIATELY i jammed my brakes and i fishtail like some movie star and came to a complete halt with my bike perpendicular to the lorry's backside missing it by cms.

 

 

= : my lorry

|| : my bike

 

 

position => ||= (traffic light)

 

 

i think fishtailed left to right to left almost 4 times (bmx lessons came to great use)

those taxi and cars behind me sure get a shock aahhahaa

 

neway wobbled the rest of the way home.

 

1) safety distance very important

2) i'm glad i washed my tire today if not sure 100% fall

3) I was only wearing a singlet with a thin windbreaker overit. if fall sure jialat.

4) keep ur brakes in good working condition!!! (phew)

5) dun try this at home

[KerplunkZ]

HEY GUYS ! Im back.

Sian only can go forum on sat and sun...

Serving NS and on driving course in sembawang camp...

Cant book prac6 coz weekend no evening slot. F*** up.

MY LIFE IS SO S**KS!

 

Last Thing... I Stay at bendemeer =)

Can See my Tzm here =)

[speedkills]

hhahaha...i like number 5..... but woah......quite funny how you would fishtail like that....your rear wheel locked?

 

good thing you not travelling too fast..that fellow must be dreaing..

 

on cte today i saw a major accident....3 cars hamburger......power man..the last car front was gone..

 

so, guys do ride safetly...do say a short prayer before riding.

 

cheers