Ducati Riders

[yappiez]

Selling some things....

[khaejrje]

Thank you for the warmth on a cooling morning!

 

[b3nn]

Hi, recently i face this problem on my 1098s, when im at track, i downshift before entering a corner. The weird thing is after i down shift, the rev just stays at 4k rpm. As though my slipper clutch wont disengage. After i twist my throttle only then the slipper clutch will disengage. Ive rebleed my clutch recently.

 

Any inputs guys?

 

Has it been like this only since the bleeding? If it is then that's your problem, if it isn't, then I think its better if you say exactly what transpired.

[XxPJYxX]

Hi, recently i face this problem on my 1098s, when im at track, i downshift before entering a corner. The weird thing is after i down shift, the rev just stays at 4k rpm. As though my slipper clutch wont disengage. After i twist my throttle only then the slipper clutch will disengage. Ive rebleed my clutch recently.

 

Any inputs guys?

 

When was the last time u did valve clearance? Or tuned your bike? Hope u don't mind me asking...

[blackreplica]

Hi, recently i face this problem on my 1098s, when im at track, i downshift before entering a corner. The weird thing is after i down shift, the rev just stays at 4k rpm. As though my slipper clutch wont disengage. After i twist my throttle only then the slipper clutch will disengage. Ive rebleed my clutch recently.

 

Any inputs guys?

 

What rpm were you at, and how many gears did you drop before you entered the turn? was this at turn 1 or somewhere else?

[kelaitre]

anyone can recommend a motor tiam to sell away my ducati ST4S sports tourer?

[nd_danial]

My valve clearance was done 8000km ago. And the problem arises before i rebleed my clutch. I was going at abt 8krpm wwhen i downed 1 gear, and its rpm was 3.5-4k. Minimal engine break. I have to bleep my throttle for it to show the actual rpm at that speed. Itvhappens in almostvall turns where i have to downshift.

[yammy]

My valve clearance was done 8000km ago. And the problem arises before i rebleed my clutch. I was going at abt 8krpm wwhen i downed 1 gear, and its rpm was 3.5-4k. Minimal engine break. I have to bleep my throttle for it to show the actual rpm at that speed. Itvhappens in almostvall turns where i have to downshift.

 

That's ur slipper clutch working.

[tuAs_ridEr]

Anyone organizing a meet up and went down 2gether at... the SBF 11th Aniversary @ Scape Pk next week.....

 

Anybody anybody?

[nd_danial]

That's ur slipper clutch working.

 

Yes i know. But the problem is it wont disengage. Ive riden my bike when its all fine.

[yammy]

Yes i know. But the problem is it wont disengage. Ive riden my bike when its all fine.

 

I presume U mean it will not engage. The slipper clutch mechanism disengages the clutch when the wheels turn the engine and engages when the engine turn the wheels.

 

The slipper clutch is design to disengage when the difference between the engine rpm and wheel rpm exceeds by a certain amount. Ideally the slipper clutch should have no clutch drag, as you close the throttle the rpm falls to idle and the bike freewheels. In real world, the clutch drags and therefore maintains a certain rpm, sufficient to prevent wheel lock while still provide some engine braking.

 

If u r using the STM evolution (sensitive to clutch pack thickness), the rpm maintained will decrease as the clutch plates wear out. In ur case, since the clutch maintains rpm in the 4k region, ur clutch plate will need to be replaced soon.

[pum9kin_h3ad]

Hi guys, im selling a Ducati Performance racing seat... details as below. Thks

http://www.singaporebikes.com/forums/showthread.php/376026-Ducati-performance-seat

[nd_danial]

I presume U mean it will not engage. The slipper clutch mechanism disengages the clutch when the wheels turn the engine and engages when the engine turn the wheels.

 

The slipper clutch is design to disengage when the difference between the engine rpm and wheel rpm exceeds by a certain amount. Ideally the slipper clutch should have no clutch drag, as you close the throttle the rpm falls to idle and the bike freewheels. In real world, the clutch drags and therefore maintains a certain rpm, sufficient to prevent wheel lock while still provide some engine braking.

 

If u r using the STM evolution (sensitive to clutch pack thickness), the rpm maintained will decrease as the clutch plates wear out. In ur case, since the clutch maintains rpm in the 4k region, ur clutch plate will need to be replaced soon.

 

Thanks for the input any recommendations for clutch plates? Oem, ducati perfomance?..

[t28]

Too many welcome rides? Nowadays we do Send-off Parade instead....

 

 

http://i475.photobucket.com/albums/rr115/terence28/20130121_224723small.jpg

 

All kakis fall-in for Handing Over Ceremony of the 916 Senna II

 

http://i475.photobucket.com/albums/rr115/terence28/DSC_0812_zps2d61661aBlackout.jpg

 

Thanks all of u who responded in super short notice! It was a memorable send-off ceremony! Hahahaha!

 

http://i475.photobucket.com/albums/rr115/terence28/DSC_0818_zps7bce20abBlackoutsmall.jpg

 

Bye Bye Senna!

[SBSSAR]

I think its this.

 

Oh yes! True true, I think he can also consider this.

 

I actually would prefer to ride this to work...

[janxerox]

28........niceeee

[Skywheel]

To hijack this thread abit.

Selling my may07 1098s with many accessories @27k. For more details pls call me @98536369. Thanks!

ps: btw no low ballers thanks.

[happyjunz]

28........niceeee

 

xiang kar pager?

 

very sensitive to number 28 haha

[Yeehaa]

boring day!

 

am still determined to have my cup of coffee at coffeebean @ orchard forums lol...

 

will be there at 7 to read my book and people watching.

 

like minded people whom are bored, please feel free to join ma haha!

 

Hi guys,

 

I just got my M1100, can I join u guys for kopi at forum mall? What are the timings??

[b3nn]

I actually would prefer to ride this to work...

 

I don't think that will get you to work.

[happyjunz]

anybody going to the SBF anniv today?

 

i'm going there to take a look around 4pm. see you guys if you are going

[Forestfly]

anybody going to the SBF anniv today?

 

i'm going there to take a look around 4pm. see you guys if you are going

 

I will be there around 3-4pm too! cya all

 

Sent from Samsung S3 using Tapatalk 3

[happyjunz]

brembo rcs 16 for $390 at unique motorsports booth @ sbf anni @ scape. worth the $?

[fubby]

To hijack this thread abit.

Selling my may07 1098s with many accessories @27k. For more details pls call me @98536369. Thanks!

ps: btw no low ballers thanks.

 

Great deal for this bike , grab it !

 

 

Sent from my iPhone using Tapatalk

[iamdaman]

Fubby, time to change profile pic