[Discussion] Super Four General Enquiry Thread

[drifter2013]

Available sizes:

M5x16mm

M6x16mm

M5x10mm

M6x10mm

 

Stainless Steel. Selling 1 pc for $3. 1 pair for $5. Pm if interested. Limited stocks.

 

which one suitable for cb400 revo ?

[drifter2013]

Once you try class 2 bikes , you will feel super 4 power soft

 

time you pay class 2 bikes rd tx & repair, you will feel super 4 soft also

[drifter2013]

Hi All,

Just want to discuss the advantages & disadvantages of Spec3 & Revo.

Why most of the rider comment tat Spec3 is better than Revo.

Pls advise.

[kaizersg]

time you pay class 2 bikes rd tx & repair, you will feel super 4 soft also

Indeed

[nsr1980]

any place selling used Revo ...2013 model?

[jhawk2820]

Hi,

 

Any one know the screw size and screw length for rear shock absorber for both top an bottom.

For CB 400 Spec 1.

[Leong79]

Hi bro, i'm looking for Givi A240 windscreen for my CB400 revo,

Anyone Know where to get it ? Thanks.

Edited June 1, 2015 by Leong79

[sydarume]

Hi, I have vibration in my stock side mirrors at acertain speed and RPM and while cruising at 100kph and above they are virtually unusable. I've tightened the threads and it vibrates alot still. vibration seems to come from the fork through the handlebar and to the mirrors. my grips don't feel much vibration due to the heavy bar ends I have. Any ideas how to solve this problem DIY?

[jhawk2820]

Hi,

 

Any one know the screw size and screw length for rear shock absorber for both top an bottom.

For CB 400 Spec 1.

 

anyone can help?

[uknowme]

halo...

 

does anyone have any idea how much does it cost to replace the gasket?

[jtzx]

anyone know where to get a replacement number plate? my bracket gave way and there goes my number plate

[jtzx]

which gasket? top block gasket is around $140 at Raceworks

[stkoh78]

Recently my bike stalling quite a number of times during riding. I have this issue few months ago and problem appeared to have solved after changing spark-plugs but this issue resurface back again recently.

Most of the stalling incidents that i observed is when i released the clutch during gear changing. Any advise.

 

spark plugs was last changed around 8500km ago

Battery changed on Dec 2013 but each time when I have no issue in cranking the bike. The horn still loud even engine is not start.

[Makiyo Ng]

Hi, I have vibration in my stock side mirrors at acertain speed and RPM and while cruising at 100kph and above they are virtually unusable. I've tightened the threads and it vibrates alot still. vibration seems to come from the fork through the handlebar and to the mirrors. my grips don't feel much vibration due to the heavy bar ends I have. Any ideas how to solve this problem DIY?

Bro, u can change your mirror to original or better quality pair will solve your problem or change wheel bearing to stop d vibration man....

[vinal_22]

Hello,

 

Anyone can help me find a person, who can remove the led strip put in the speedo/rpm meter dials? Also would like to get the speedo dial(black background which has speed mentioned) changed.

[snowclobber]

Hi Bros, what handle grips recommended for s4? Are Ariete grips good? Where can get them and ard how much? Thanks.

[Siphon]

Once you try class 2 bikes , you will feel super 4 power soft

 

poison lar bro... hahahaa... lucky the CBR600 not too power at the school to change my mind yet

[Siphon]

Recently my bike stalling quite a number of times during riding. I have this issue few months ago and problem appeared to have solved after changing spark-plugs but this issue resurface back again recently.

Most of the stalling incidents that i observed is when i released the clutch during gear changing. Any advise.

 

spark plugs was last changed around 8500km ago

Battery changed on Dec 2013 but each time when I have no issue in cranking the bike. The horn still loud even engine is not start.

 

what is your idle rpm after the bike warms up? Which model is your S4?

[pyro77]

Any place where I can install gear indicator? Cheap as possible, thanks.

 

Riding a version s.

[drifter2013]

Recently my bike stalling quite a number of times during riding. I have this issue few months ago and problem appeared to have solved after changing spark-plugs but this issue resurface back again recently.

Most of the stalling incidents that i observed is when i released the clutch during gear changing. Any advise.

 

spark plugs was last changed around 8500km ago

Battery changed on Dec 2013 but each time when I have no issue in cranking the bike. The horn still loud even engine is not start.

 

maybe u need to chk ignition coil located below the tank on left side

[snowclobber]

Bros, where can I get this and how much? I've been looking for them but always found those without the pillion footrest portion.

[bonzee]

Hey guys,

Does anyone know where i can get a rear hugger/rear fender that will fit a CB400SF 2010 with ABS?

I can only find ones that will fit with no ABS.

 

Thanking you.

[suchwow]

Anyone can advise on full overhaul prices?

[assault_ex]

Anyone ever port and polish their cylinder head during top overhall??

 

Sent from my SM-N9005 using Tapatalk

[nqh71]

Hi Guys,

My Bro just lost his last set of cb400 spec 3 keys. Where can he make a new one? Price?

Called Boon Siew, and they said need to change new ignition security's stem lock which will cost about $1200+.

Can help? Thanks.