[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[edyz]

.any bro out there knew anywhere to get the end can bracket....i mean the brandless type....

[faradona]

guys.... full tank is 18 l correct...

but how much is reserve and the main tank?

[pyro13]

but how come i always pump 13 liter.. cannot 18... i pump until cannot pump max is 13.1L

[superpig4]

hi ppl!!!

 

:help: today just changed my chain and sprocket. My previous size was 42.. after changin sprocket,i notice something diff le..previously,at 6krpm,my speed was 100km/h and was stable and minimum vibration but now,at 6krpm,my speed was 90km/h then lots of vibration...can anybody tell me wats wrong..

bcos i didnt expect to pay 180 to have this kind of problems le..somebody HELP me!!

 

edyz - seng kwang at AMK autopoint complex...

[edyz]

Originally posted by superpig4@Dec 10 2006, 12:11 AM

hi ppl!!!

 

:help: today just changed my chain and sprocket. My previous size was 42.. after changin sprocket,i notice something diff le..previously,at 6krpm,my speed was 100km/h and was stable and minimum vibration but now,at 6krpm,my speed was 90km/h then lots of vibration...can anybody tell me wats wrong..

bcos i didnt expect to pay 180 to have this kind of problems le..somebody HELP me!!

 

edyz - seng kwang at AMK autopoint complex...

..thanks bro 4 the info...

 

for the rpm ups and down..it should be no prob bro..as long it dont fly off its safe.....wat r the current size ure using.....i dont think the vibration was cause by the change of chain size..but i dont know....u should be feeling much shiok to ride with a new chain .....

[superpig4]

edyz - yesh,its definitely smoother when speed below 100km/h...btw,changed to size 45...and now its like having me to revive till 6.7 - 7krpm for me to reach the speed of 100km/h le...thats why i say vibration alot ah..

[snowparang]

Originally posted by superpig4@Dec 10 2006, 02:12 PM

edyz - yesh,its definitely smoother when speed below 100km/h...btw,changed to size 45...and now its like having me to revive till 6.7 - 7krpm for me to reach the speed of 100km/h le...thats why i say vibration alot ah..

you up the sprocket size of course your speed at the same rpm will be lower...

[pyro13]

how much does it cost to rebuilt suspension. my suspension is leaking.. i tink the oil seal gone.. how much to change??

[pyro13]

and does anyone know wer is motor x

[raidknight]

Originally posted by shahid@Dec 5 2006, 08:55 PM

Hi Guys,

 

I jus bought my version s just now. cool... but i realise that there is a strange sound when i ride the bike.... kiuuk...kiuuk...kiuuk sound. anyone know how to get rid of the sound?

in front or behind? more details?

[raidknight]

Originally posted by pyro13@Dec 11 2006, 12:07 AM

how much does it cost to rebuilt suspension. my suspension is leaking.. i tink the oil seal gone.. how much to change??

about $85

[pyro13]

at wer.. d rear suspension..

[Fazli]

Originally posted by pyro13@Dec 10 2006, 12:09 AM

but how come i always pump 13 liter.. cannot 18... i pump until cannot pump max is 13.1L

Used to face the same prob. I found out my main is 13L and my reserve is 5L. Reserve I can go up to about

[superpig4]

Problem : change spocket size frm 42 to 45,6krpm speed only 90+/- and having some vibration problems.

 

thanks snowparang!! btw,today i notice one thing...at 5krpm,my speed was at 80km/h..throttle a bit more to,let's say,5.5krpm..my speed was still at 80km/h and struggling to increase..do u have any idea? btw i Just changed my clutch plate few months back..could be is clutch slipping at higher speed? And moreover,at low speed,when i pull the clutch lever at where the clutch is discon/con(a bit more will be half clutch)..i experience rattling sound from the front spocket..

I changed the chain partly bcos of the rattling sound i had previously,asked bike shop,they tell me front spocket "ah bas" liao..now i changed liao...still have this problem but no as serious as i had previously,this time round the sound was softer..but it is still bothering me..

Bcos 180bucks to me is no joke man...

 

pyro13 - if u wanna, u can go Ubi's Planet Motor,i think they have second hand Showa suspension..both Version S's and Vtec's,1 pair each. Selling at 300 bucks.

For ya info,rebuilding the rear shock at BikeLab is around 250+/-..this price is i happen to read in the forum,not sure if it is the exact price..to me,i think its not worth it. Or u can try aftermarket Gazi shock,which i am currently using..bought new at 200bucks.

If u r asking abt front suspension,i think its abt 90-120bucks to service...

[pyro13]

guys, i asked bikelab.. costs 230 to change oil seal at suspension.. i am organising a mass order for gazi suspension.. 200 for 5 and if more can get cheaper..so come on.. bro fazli.. i pump 13 l wen my fuel needle is at the reserve sign.. like until no petrol at the fuelgauge.. how come?

[LordCani]

I dont tink the guel guage is accurate... mine shows reserve even before travelling 200km... but i can ride till 370 or more then hit reserve... Tilt left, the needle goes reserve, tilt right the needle goes up... yeah, or is it just my bike like that haha.

[hmmm]

hey shahrul the hau heng shop is at ah gua lane izzit? which shop ah?

[MikeS4M]

cradle: i LoVe the Girl at Your avatar....

[pyro13]

hou heng is beside the jb ah boy branch

[snowparang]

Originally posted by superpig4@Dec 11 2006, 09:40 PM

thanks snowparang!! btw,today i notice one thing...at 5krpm,my speed was at 80km/h..throttle a bit more to,let's say,5.5krpm..my speed was still at 80km/h and struggling to increase..do u have any idea? btw i Just changed my clutch plate few months back..could be is clutch slipping at higher speed? And moreover,at low speed,when i pull the clutch lever at where the clutch is discon/con(a bit more will be half clutch)..i experience rattling sound from the front spocket..

I changed the chain partly bcos of the rattling sound i had previously,asked bike shop,they tell me front spocket "ah bas" liao..now i changed liao...still have this problem but no as serious as i had previously,this time round the sound was softer..but it is still bothering me..

Bcos 180bucks to me is no joke man...

Well, speed and rpm is not always 100% correlated. I guess it's normal. You can try: on downslope at 5k rpm are you slightly faster than 80 km/h? Sorry but I still doesn't have a good explanation for this, maybe it need some time for the speed sensor on the front wheel or speedometer to register the speed increase.

 

As for the sound, my guess is that it's always been there. Super 4 has noisy chains though I'm not sure why. When you clutch your engine is at idling I guess. This is when you bike is the most quiet and yet all the parts are moving (wheel, chain etc) and hence you can hear the sound of chain/sprocket. Should be normal but best is to comapre with another super 4. I use this method to detect abnormal noises too.

 

As for clutch slip, the easiest way is to use first gear. Find an empty road, gun all the way first gear to 13K rpm. If you feel there's torque and the speed increases all over the rev range I think it's alright. Anyway it's new clutch plates, shouldn't slip. On my 2 stroke bike clutch slip is very obvious cos when the valve opens the rpm jumps up but the speed remains the same.

[shahrul_azmil3]

i only recommand going to hou heng shop with u got things buy from them and install and not from buying outside and ask them to install coz they will chop u like hell ..... i kena chop by them a couple of times too that's y i'm starting to dislike it ..... haiz .... regular customer also they chop ......

[crookz00]

Anybody SCRAPING their Ver 's' super 4....

Coz... I want to do an xchange 1 to 1...plus some$$$$$$

tanx

Stuff like...

1.speedo meter

2.Front fork

3.Fork brace....etc...

[rockoil]

Hi guys,

 

Just bought a VER S. Will like to check with the pro here on the capacity of the fuel tank the spec of tire should use.

 

Case 1

Fuel needle pointing reserve, went top up and manage to fill 10L.

 

Case 2

Was recommend to change the front tire to 120 then to get 110. So what you guys use for front and back.

 

Thanks!

[rockoil]

Originally posted by pyro13@Dec 14 2006, 12:53 AM

hou heng is beside the jb ah boy branch

Bros, can advise when is this JB ah boy and where is the ah gua lane you guys are always taking about. Thinking going down to look see look see.

 

Thanks!

[WingZer0]

Originally posted by shahrul_azmil3@Dec 14 2006, 12:33 PM

i only recommand going to hou heng shop with u got things buy from them and install and not from buying outside and ask them to install coz they will chop u like hell ..... i kena chop by them a couple of times too that's y i'm starting to dislike it ..... haiz .... regular customer also they chop ......

shahrul....how long did they take to decat the header? a few hours?