front wheel probs

[nutboy]

I'm riding 125z my front wheel after i change to a new flower disc, wheel bearings, brake pads it still has probs turning. very rough, spin abit stop alr. 1st shop told me pads so i chg, 2nd shop say disc and bearings i oso change. but prob still persist. any1 can help me out. thanks

[CMYRS]

why did u pay honest dollar and not get the shop to fix the issue as the problem persisted after following their advice?

[nutboy]

they say ok alr. but the wheel still got prob spinning lei. is it like tt one

[QuaXum]

new flower disc might be thicker, thus pads rubbing, should go away after some riding.

[CMYRS]

incorrect discs fitted, or incorrectly mounted calipers?

 

how can u have the pads rubbing the discs everytime u fit new ones on?

[nutboy]

new flower disc might be thicker, thus pads rubbing, should go away after some riding.

 

i try riding for some time first. thx bro

[QuaXum]

incorrect discs fitted, or incorrectly mounted calipers?

 

how can u have the pads rubbing the discs everytime u fit new ones on?

 

mine was rubbing quite a bit after i fitted new pads on my old disc, same for my friend's bike. after sometime, the rubbing goes away. need sometime for the pads to bed in i think.

[KeraKing]

is it something in the caliper jammed?

[nutboy]

when to pl*n*t motor the person say can't do the bracket wrong(racing boy). then went to w*ng y*p the uncle say new pads n rotors not even one week must ride for sometime nth's wrong. so i jus ride on c wat happens lo

[yinghai]

Sounds like your caliper jammed..

[damagedigital]

Had that problem before.. Piston of the caliper jam.. Service the whole set. Problem solve. Done it at unique..

[crazydj]

How much to service the caliper?

[damagedigital]

Crazydj. You got pmed..

[MiddleAgedBiker]

Don't throw parts at a problem unless you have a bottomless wallet. It's easy to know if it's the bearings or the brake components. Just unbolt the caliper and spin the wheel and you have your answer. If it still binds without the caliper, it's nothing to do with the brakes. If it spins freely with the caliper removed, it's nothing to do with the bearings.

 

Think through the problem step by step. It'll save you hundreds if not thousands of dollars in the long run.

[I 3 Stix]

i got the same problem changed pads and bearing.. improved slightly but still stuck.. i think it's the piston was told to service but was quoted 45.. how much did you pay? and what did they do?