Honda Blackbird CBR1100 XX

[AeROSmitH]

ook mates....

 

Good news for the pmo on EBC Clutch Spring (only) Set

 

1 supplier replied & with direct shipping to Singapore...

 

Per set est ard S$15+-....

 

good pricing now awaiting the rest to reply me....

 

yoyo! is the pricing confirmed? maybe will just get 2 set...keep as spare. lol!

[FaiGotten]

yoyo! is the pricing confirmed? maybe will just get 2 set...keep as spare. lol!

 

i might do the same if the price is $15

[JbAtRaCeR]

Ok guys this saturday i wanna diy my bike...Clean up my airfilter,starter valve and readjust my autochoke...Starting at 1pm and end at 5pm..There might be a friend of mine also doing up is Fazer 1k...Location will be at Toa Payoh Lorong 4,Blk 60A MSCP deck B3...Feel free to tag along..

[man simei]

hello,bro sujak, you re right as you know i get my 4-2-2 full systen headers for my bird only s$230.

 

and i know the guy that sold me the headers.recently i check with him about 4-2-1 full system headers

 

and he told me he dont have the stock at the moment but he can get it for me if i want it.he said he can shift it for me front the factory or i can get from the factory my self.the factory is in china and i have the address.

[Cpt.ZR]

Ok guys this saturday i wanna diy my bike...Clean up my airfilter,starter valve and readjust my autochoke...Starting at 1pm and end at 5pm..There might be a friend of mine also doing up is Fazer 1k...Location will be at Toa Payoh Lorong 4,Blk 60A MSCP deck B3...Feel free to tag along..

 

onz. i will come by, re do my auto choke... and come pour water in your exxhaust.

wakakakakkakakakakakkakakak

 

btw, to acess to auto choke i gotta remove the tanks right right? so i will try to go by about half tank? or less of petrol?

[JbAtRaCeR]

onz. i will come by, re do my auto choke... and come pour water in your exxhaust.

wakakakakkakakakakakkakakak

 

btw, to acess to auto choke i gotta remove the tanks right right? so i will try to go by about half tank? or less of petrol?

 

You wanna put banana also can..heheh!!..No need to remove tank..juz need to lift the tank(will use strings to act as third hand)..remove airbox (top n bottom) and loosen both ignition coil mounts....Less petrol is best bro...By the time we open up everything to adjust the autochoke,the coolant temperature should be below 40...

Edited September 27, 2011 by JbAtRaCeR

[Cpt.ZR]

You wanna put banana also can..heheh!!..No need to remove tank..juz need to lift the tank(will use strings to act as third hand)..remove airbox (top n bottom) and loosen both ignition coil mounts....Less petrol is best bro...By the time we open up everything to adjust the autochoke,the coolant temperature should be below 40...

 

roger that. Errrr, so i assume we need..

 

1 set of sprocket kit.

1 rag

a bottle of water to drink.

 

thats all right?

[sujak]

roger that. Errrr, so i assume we need..

 

1 set of sprocket kit.

1 rag

a bottle of water to drink.

 

thats all right?

 

dont forget a packet of ciggies for bro jbat.. hehehe

[greysnail]

dont forget a packet of ciggies for bro jbat.. hehehe

 

Pole dancers??

Strippers???

beers???

[AeROSmitH]

Any birdies with Akra at sicc now? Spotted the birdie here

[man simei]

Any birdies with Akra at sicc now? Spotted the birdie here

 

yes, bro that mine. i will be at sicc for this week.

[JbAtRaCeR]

roger that. Errrr, so i assume we need..

 

1 set of sprocket kit.

1 rag

a bottle of water to drink.

 

thats all right?

 

Dunt worry about tools..Underneath my bed got enough to strip a bird....Rag will do and a bottle of water..

 

If got pole dancers...strippers..booze...WOW!..I bet it will be one great DIY session using natural tools...Oh My....

[stwb1981]

sengkwang.. good workmanship and it comes with a price..

Bike Fabricator (Kaki Bukit) - Known as Ah An.. cheap and good and very friendly..

 

Another good place to try will be Jeep Chee in Ubi..

 

Thanks for the info mate!!!

 

hello,bro sujak, you re right as you know i get my 4-2-2 full systen headers for my bird only s$230.

 

and i know the guy that sold me the headers.recently i check with him about 4-2-1 full system headers

 

and he told me he dont have the stock at the moment but he can get it for me if i want it.he said he can shift it for me front the factory or i can get from the factory my self.the factory is in china and i have the address.

 

Wow tat dirt cheap.... for a 4-2-2 system...

i believe it should be stainless steel right or...?

 

 

Good news to all birides....

I also source a local supplier for EBC clutch springs...

it cheaper slightly but waiting time will be 2 mths....

Pricing is S$13 per set....

for the States supplier the pricing is S$15 or lesser abit (exchange rate) firm....

No worries all black & white will be shown to U all

Any advices...?

I try to accomdate to all request but no promises....

Pricing is priorty ....

Cheers!!!

[AeROSmitH]

yes, bro that mine. i will be at sicc for this week.

 

I'm still there now! Nice sliders and exhaust! Eh ask you ah bro. Where you buythe red screw used to hihook cargo net? The 4 screws. 2 at seat 2 at grabbar.

[stwb1981]

I'm still there now! Nice sliders and exhaust! Eh ask you ah bro. Where you buythe red screw used to hihook cargo net? The 4 screws. 2 at seat 2 at grabbar.

 

Haha... I noe tat bike & owner....

saw him at republic motor haha

[sujak]

I'm still there now! Nice sliders and exhaust! Eh ask you ah bro. Where you buythe red screw used to hihook cargo net? The 4 screws. 2 at seat 2 at grabbar.

 

he didnt buy.. he got it.. haha.. anyway, u can purchase them at motoworld...

[stwb1981]

so hw guys.....?

pref to get it locally at $13 firm per set but waiting time is 2 mths

or

$15 +- per set waiting time max 2 weeks....

it nt a lot of savings but still gt save lah...lol

[sujak]

so hw guys.....?

pref to get it locally at $13 firm per set but waiting time is 2 mths

or

$15 +- per set waiting time max 2 weeks....

it nt a lot of savings but still gt save lah...lol

 

is there anyone who needs the clutch spring urgently.. if not den we shall wait it out.. i would go for the $15 because knowing some local supplier, the shipping time set by them can be extended..

[braveiron]

Guys, recently noticed a group of BB riders hanging around at Simpang Bedok.Anyone from here?

[Cpt.ZR]

hmmm steven i dunned the clutch spring urgently. so i can wait out.

but if other brothers are urgently needing it then i dont mind the expedited shipping...

 

and one more note .. anyone noticed that our bb forum is getting alive!

 

wooohhooo.....

 

 

plsplspls talk more. haha and sat got diy session dun forget... bro jebat mind pm-ing me your number?

 

 

just incase i get lost and i can call you. whehehe. then i will pee in your exhaust. hahahah!

[man simei]

yes bro, sujak you are smart.i got all the slider at motor world.for those who looking for the full system header 4-2 or 4-2-1 can email to mr.Luke @ delkevic us.com. and ask him the email add.for the factory in china. it should be cheeper to get direct from factory in china.they can shift it to singapore.the factory is DK manufacturing.in Ninbo China.

[greysnail]

No hurry for the springs.....

[stwb1981]

is there anyone who needs the clutch spring urgently.. if not den we shall wait it out.. i would go for the $15 because knowing some local supplier, the shipping time set by them can be extended..

 

True indeed as they usually gather their order till max before shipping out to Sg to maximise the $$$...

nvm still have a day more...

Cheers!!!

[stwb1981]

KINDLY FILL UP YOUR CONTACTS FOR THOSE YET TO FILL UP....

 

PMO Clutch Spring (only) Set

 

Closing Date: 30 Sept 2011 (2359H)

 

Brand: EBC Clutch Springs

 

Nick / Bike Year / Quanity / Contact

 

1. stwb1981 / 1997 / 1 set / 96284016

2. hoaxter/ 2001 fi / 1 set /90252230

3. cpt.zr / 2004 model FI / 1set / EBCCCC (cause imma brand *****)

4. Greysnail / 2002 Efi / 1 set / 90260921 (juz to prep up)

5. Trueno/2001 Fi/ 1 set

6. Aerosmith/2005 Fi/ 1 set

7. FaiGotten / 2003 Fi / 1 set / 92384865

8. JbAtRaCeR / 2005 Fi / 1 set

9. Reza/ 2005 FI / 1 set / 97250605

10. Sujak / 1999 FI / 1 Set / 93857512

11. Remy / 1999 FI / 2 sets / 82607955

12. Jay / 2002 EFI / 1 set / 93363649

13. sUPeRBoy / 2000 EFI / 1 set / 82221895

 

Total Sets (as of 30 Sept 0026H): 1 Set Clutch Springs Carb & 13 Sets Clutch Springs FI

[AeROSmitH]

yes bro, sujak you are smart.i got all the slider at motor world.for those who looking for the full system header 4-2 or 4-2-1 can email to mr.Luke @ delkevic us.com. and ask him the email add.for the factory in china. it should be cheeper to get direct from factory in china.they can shift it to singapore.the factory is DK manufacturing.in Ninbo China.

 

real ones are all sliders ah? ok cool~

 

does the delkevic headers have any performance effect?