[Group] YAMAHA Fazer

[PaLmEr]

hmmm... i think wash can but not using kerosene... it's kinda harmful for the chain thingy for what i know...

Kerosene is NOT harmful for the O/X-ring chains, in fact, it is recommended by the manufacturer to clean the chain using Kerosene. Avoid using petrol to clean the chain.

[pichudot]

Kerosene is NOT harmful for the O/X-ring chains, in fact, it is recommended by the manufacturer to clean the chain using Kerosene. Avoid using petrol to clean the chain.

 

oh... okie dokie thanks! hmmm last time i must be mix cleaning with these two that's y got problem...

[ChopStick]

Hey guys, anyone have a problem with clutch being too "stiff"? I often allow friends to try out my bike and they complained my clutch being too stiff. But when they bought the F6-N, their clutch proves too be very soft.

 

I wonder could it be mine being a old bike, worn and full of dirt, thus being stiff. I rem someone told me that FZ6S and FZ6N clutch cables are mounted up slightly different, FZ6S' ones are pretty tricky to fix.

 

Anyway, Just asking whether someone had this problem and went to any bike shop to fix it. Care to recommend please? Gonna change my handle grips also, been using stock for these 2 years. Thank You guys

[DaBonz]

Gd morning all! HUAT AR!!

[DeusExMachina]

hopStick;5629120']Hey guys, anyone have a problem with clutch being too "stiff"? I often allow friends to try out my bike and they complained my clutch being too stiff. But when they bought the F6-N, their clutch proves too be very soft.

 

I wonder could it be mine being a old bike, worn and full of dirt, thus being stiff. I rem someone told me that FZ6S and FZ6N clutch cables are mounted up slightly different, FZ6S' ones are pretty tricky to fix.

 

Anyway, Just asking whether someone had this problem and went to any bike shop to fix it. Care to recommend please? Gonna change my handle grips also, been using stock for these 2 years. Thank You guys

 

 

Change your clutch cable.

[DaBonz]

hopStick;5629120']Hey guys, anyone have a problem with clutch being too "stiff"? I often allow friends to try out my bike and they complained my clutch being too stiff. But when they bought the F6-N, their clutch proves too be very soft.

 

I wonder could it be mine being a old bike, worn and full of dirt, thus being stiff. I rem someone told me that FZ6S and FZ6N clutch cables are mounted up slightly different, FZ6S' ones are pretty tricky to fix.

 

Anyway, Just asking whether someone had this problem and went to any bike shop to fix it. Care to recommend please? Gonna change my handle grips also, been using stock for these 2 years. Thank You guys

 

err..not sure wat u mean by stiff.. if u mean wen u pull in there's a lot of tension or wen u pull in u feel some resistance?

 

try oiling ur cable a bit.. dun use chain wax hor..use lube/grease..

 

if u feel smooth halfway then resistance mebbe u got a kink in the cable. Clutch cables have a lifespan..need to change when it's worn out.

[mokamoka]

sound logical.....

hmm....

i onli noe scotoiler work by vacuum ......

rest of hw it actually work ...

no idea....

tink must go do sum research...

 

if the vacuum hose give way, bike still can start... comfirm + chop...

 

you get a hissing sound from the pigot only...

[ChopStick]

Change your clutch cable.

 

Guess its about time. Will be heading to motorshop and have it replaced. Both the handle grips and clutch cables.

[ChopStick]

err..not sure wat u mean by stiff.. if u mean wen u pull in there's a lot of tension or wen u pull in u feel some resistance?

 

try oiling ur cable a bit.. dun use chain wax hor..use lube/grease..

 

if u feel smooth halfway then resistance mebbe u got a kink in the cable. Clutch cables have a lifespan..need to change when it's worn out.

 

I tried oiling it be4. Better a little. But think this time, once and for all, have it replace. Will update the price when I get it done. If anyone had it done be4, please update too.

 

Thanks

[Intruder]

No polo ..wear t shirt also can...i ask the company whether they can "sponsor" the polo boh..they reply..U go "eat" yourself..wahahaha:dozed:

 

Usually the case.... eat yourself heng liao lor... nvr ask you dun need to come anymore & you are very luck liao.

 

 

Bro..i sending in my bike to juz wheels for bike grooming 2moorow...See ya ON this SAT!!!

Last time i went, my swing arm was scratched during the wash. Came back wif many hair-lines. My heart also sctached too.

[Intruder]

hopStick;5629243']I tried oiling it be4. Better a little. But think this time, once and for all, have it replace. Will update the price when I get it done. If anyone had it done be4, please update too.

 

Thanks

 

Guess it's abt $70+ if i nvr get the qoute wrong.

[maxxmadness]

 

 

No polo ..wear t shirt also can...i ask the company whether they can "sponsor" the polo boh..they reply..U go "eat" yourself..wahahaha:dozed:

 

 

wah like that ah, company win liao lor...

[maxxmadness]

Washing and proper cleaning is strongly encouraged. The washing clear away those grimes and dirt that sticks on you chain.

 

You can use degreasers to clean the chain links and parts. But ALWAYS remember not to use anything too strong that kills you O rings within the links. Wash with fresh water thorough & make sure no degreaser residue on the chain. Apply back the proper chain oil or wax to protect and lucbricate the chain & links.

 

Strong degreaser may cause 'makan' on the O ring and some may give you the MAX clean with dry O ring then which may crack later.

 

Just my way of cleaning and oiling of chain.

 

actually if you are using scottoiler oil, i dont see a need to use any degreaser..its comes off quite easily

 

another tips for those who wants to keep their chain clean, keep your unwanted socks the next time you think you want to throw away already, it comes in handy...wear it like a glove and hold the chain and wipe as you go along, then after you can throw away that sock and your hand and fingers is still clean, and your chain clean too,,,,

[DaBonz]

actually if you are using scottoiler oil, i dont see a need to use any degreaser..its comes off quite easily

 

another tips for those who wants to keep their chain clean, keep your unwanted socks the next time you think you want to throw away already, it comes in handy...wear it like a glove and hold the chain and wipe as you go along, then after you can throw away that sock and your hand and fingers is still clean, and your chain clean too,,,,

 

just dun do this while the bike on mainstand engaged in gear..gd way to lose fingers

[DeusExMachina]

Use a paintbrush la... wah lao eh.... sock?

[Intruder]

Toothbrush, socks, chain brush, (soft)copper brush, paint brush all also can la. As long the grimes can be out.

[farish]

http://www.motoevolution.co.uk/catalog/product_info.php?cPath=6&products_id=11653&make_id=2&model_id=567&year=2008

 

Guys, what do u think of this product? Its a scoop some fairing like piece that is attached to the radiator.

[SparkerS1]

very dirty bike..of course easy to recongnise!!

dirty meh? chio lor, those who in SBF knows how to recognize ur bike:D

[Intruder]

Though it did mentioned abt function and look, but there is no directional flow scoop to channel the incoming cool air onto the radiator. The only flow panel is the one at the mid rear of the panel and it like for the discharge side on the air flow than the input.

 

If i am not wrong the one you are looking at is from Ermax.

Check out this the newer products.... super chio. But pricey....that Dann belly pan cost $270 minimum.Ermax

You can order from MW for Ermax product.

[Intruder]

dirty meh? chio lor, those who in SBF knows how to recognize ur bike:D

 

His bike is known for the TRANSFORMER setup. Even MCA mag also featured his creation. Now his more like super gadget machine.....

[stwb1981]

Thank for the info banana...

hmm....

most prob will carry on fixing it...

tink scotoiler do more gd than harm....

mayb the rim washing part will be a but hetic..lol:angel:

 

clutch cable for gen1 1000 is $48...

coz it quite long & many bend areas & certain parts in metal....

tat y so ex...

so if yr clutch cable is like tis ...

 

Cheers!!!

[piggyback1974]

COLOR="Magenta"][/color]Date:18 JULY 2009 (Sat)

Time:7.00am - 1300 hrsMeet Up @ Hougang st 22 Blk 241 (0700 hrs) PLS DONT BE LATE.

Place:Hougang St22 - Hougang Ave 8

Re:Fazer wedding escort for racingter.

Pls Pm racingter your mobile number as a contact reference.

Dress code:Black polo t shirt with jeans

PLs take Note: NO TOP BOX and Pillon

Makan: LUNCH BUFFET IS PROVIDED (Confirmed @ 1130)

PLS bring along raincoat.

 

[FZ1S]

1. |a|ex|

2. Katana777

3. Dabonz (Marker1)

4. E.M.F

5. Xgrind

6. maxxmadness (Pointer)

7. Intruder

8. hairisg76

9. jason

10.Speedpass

11.Madcow1975

12.Rogerfz1

13.lighterz

14.Botzz

15.joos7er

 

 

[FZ1N]

1.Naked1 (Marker2)

2 Faigotten

3.Crossover

4.DeRick

 

 

 

[FZ6]

1. pichudot

2. ROyWong13 (Bike Sweeper)

3. Yatz86

4. sarasta

5. Ivan

6. farish

7. signboard

8. nedomar

9.piggyback1974

[support Car]

1.Ronald (Bride car)

2.Potez (Car sweeper)

3.patrick

4.Laudrick

5.Debbie

 

 

 

 

 

Current Strength :28+5

[sheepy]

yo... maxxmadness... i love this ymh bike pic u haf there.. it cool and wow.. haha... if tat bike in sg.. think i will buy tat.. haha.. den fz1 will be my side... if i haf the $$... now life in sg is getting harder den i tot.. humm

[DeusExMachina]

yo... maxxmadness... i love this ymh bike pic u haf there.. it cool and wow.. haha... if tat bike in sg.. think i will buy tat.. haha.. den fz1 will be my side... if i haf the $$... now life in sg is getting harder den i tot.. humm

 

His sig pic is a Honda Evo 6 concept... not a "ymh" bike.

[pichudot]

http://www.motoevolution.co.uk/catalog/product_info.php?cPath=6&products_id=11653&make_id=2&model_id=567&year=2008

 

Guys, what do u think of this product? Its a scoop some fairing like piece that is attached to the radiator.

 

bro, MW got carry this radiator cover... but weird lei, james told me it's not compatible with fazer s2... actually i ordered this liao when i order my ermax wind shield & belly pan, hence he called up and advise me to cancel order... it cost ard $200 if i didn't rem wrongly...