[Group] YAMAHA RXZ

[limk0pi83]

oh ya jarum standard suda asarkn sikit..pather is good only when u high rev.

Edited September 24, 2017 by limk0pi83

[limk0pi83]

I overhauled my bike in march at jb so no porting only rebore. using standard reed valve but my mech did something to it i'm not sure how to explain but he made it thinner so more response i guess? hadn't changed my piston since the overhaul. how do i know whether i'm using local piston or the ori one? i just bought my mili carb too so the needle's a stock one. and i'm using the yy pang chamber pipe. Anw this is great info so thanks for sharing boss!

 

bro u using chamber but never port polish block? mana ngam bro..nk moto kuat, kuat trus bro

[kaikai92]

Hi guys, I am waiting for mt tp test on 29 Nov and is currently considering the rxz as my first bike. I would like to seek experienced bros or sis here that owns an rxz to give me some views on this bike.

 

1) maintainence roughly how much

2) fuel consumption okay?

3) how to care for 2 stroke bikes

 

Any advice will be greatly appreciated =)

[faridhisham]

Hi guys, I am waiting for mt tp test on 29 Nov and is currently considering the rxz as my first bike. I would like to seek experienced bros or sis here that owns an rxz to give me some views on this bike.

 

1) maintainence roughly how much

2) fuel consumption okay?

3) how to care for 2 stroke bikes

 

Any advice will be greatly appreciated =)

Maintenance quite cheap and fairly easy. Just change engine oil and take care 2t and normal stuff like need to change tyre, brake pads etc.

 

Fuel consumption isn't that good but can change setting to make it slightly better i think roughly will be about 20-25 km/l

 

Just take care of your 2t oil and check your block and piston to make sure no scratches should be fine.

 

Sent from my ONEPLUS A3010 using Tapatalk

[limk0pi83]

Hi guys, I am waiting for mt tp test on 29 Nov and is currently considering the rxz as my first bike. I would like to seek experienced bros or sis here that owns an rxz to give me some views on this bike.

 

1) maintainence roughly how much

2) fuel consumption okay?

3) how to care for 2 stroke bikes

 

Any advice will be greatly appreciated =)

 

workhorse bike, easiest bike to maintain

[neez]

Hi guys, I am waiting for mt tp test on 29 Nov and is currently considering the rxz as my first bike. I would like to seek experienced bros or sis here that owns an rxz to give me some views on this bike.

 

1) maintainence roughly how much

2) fuel consumption okay?

3) how to care for 2 stroke bikes

 

Any advice will be greatly appreciated =)

 

maintenance is very reasonable..

 

FC 20-25km/L

 

make sure your 2t always have enough hahas

[kaikai92]

Maintenance quite cheap and fairly easy. Just change engine oil and take care 2t and normal stuff like need to change tyre, brake pads etc.

 

Fuel consumption isn't that good but can change setting to make it slightly better i think roughly will be about 20-25 km/l

 

Just take care of your 2t oil and check your block and piston to make sure no scratches should be fine.

 

Sent from my ONEPLUS A3010 using Tapatalk

 

workhorse bike, easiest bike to maintain

 

maintenance is very reasonable..

 

FC 20-25km/L

 

make sure your 2t always have enough hahas

 

Thx you guys for your advice =) Im likely to get a RXZ but I heard from my friend that better to get those before 2011 or 2010? cause those are japanese made. Any idea about the diff btw the jap made RXZ over the ones after that?

[limk0pi83]

Thx you guys for your advice =) Im likely to get a RXZ but I heard from my friend that better to get those before 2011 or 2010? cause those are japanese made. Any idea about the diff btw the jap made RXZ over the ones after that?

 

bragging right plus u can use all 3 pipes, lemang, 3bs, 5pv added bonus lemang can mod

[limk0pi83]

selling new old stock 55k gladiator disc type for japan model. made in japan. kindly pm

Edited November 27, 2017 by limk0pi83

[Ash36]

Got a blue Rxz japan coverset for sale. Price reduced to clear. Initially collected for project, but no time to carry out. Items gd for respray project. Tank dented a bit , need to knock and do internal recoating. Comes with original sidecovers too. Whole set is complete. Only front lower mudguard not avail. Priced at $280. Interested, pls watsapp at 9437203five..

[punkrockboy84]

Anyone know any RXZ groups to join in SG, like those that hang our pretty regularly?

[Ash36]

Got a blue Rxz japan coverset for sale. Price reduced to clear. Initially collected for project, but no time to carry out. Items gd for respray project. Tank dented a bit , need to knock and do internal recoating. Comes with original sidecovers too. Whole set is complete. Only front lower mudguard not avail. Priced at $280. Interested, pls watsapp at 9437203five..

 

Note: price now reduces to $250.. item to clear asap..

[Ash36]

Note: price now reduces to $250.. item to clear asap..

 

Price now reduced to $230

[limk0pi83]

Anyone know any RXZ groups to join in SG, like those that hang our pretty regularly?

 

rxzeckers sg, retro bikes singapore and retro bikes. hope this helps

[Ash36]

Got a blue Rxz japan coverset for sale. Price reduced to clear. Initially collected for project, but no time to carry out. Items gd for respray project. Tank dented a bit , need to knock and do internal recoating. Comes with original sidecovers too. Whole set is complete. Only front lower mudguard not avail. Priced at $280. Interested, pls watsapp at 9437203five..

 

 

 

Item reduced to $200.. priced to clear..

[Fluffygrenz]

Hi, I'm using a 15/37 sprocket. Block y4 0.5.

I tried riding, and I usually feel hard to pull up my speed once I reach 7rpm. That's about 100km/hr. is it due to my settings or reedvalve or need to overhaul? Because I heard you actually can cruise at 100-120 but this one I cruise 90 only. Hope you guys can advise. Thanks.

[Mrkeringting]

Hi guys, need help. I think im having problems with my rxz FC. Full tank can last me only for 2 days. I travel from MacPherson to jurong @ 90-100km/hr most of the time. Isit normal? And anyone knows any mechanic which is specialist in rxz that can be trusted here and across the border? TIA for ur help guys. Cheers.

[gloves2ali]

 

Did a rebuild for my rxz at AGL panjang. Big damage to pocket. But price is reasonable, rounded off to 5750RM everything inside engine is new except for gears and crankcase itself. Super in love with my bike

 

Full overhaul package 2800RM

New bearings SKF

New crankshaft and rod ORI 55K

New piston ORI 55K

New piston ring ORI 55K

New gasket

New reed valve ORI

Block rebore 0.5

Decarbonise exhuast pipe

Oil & plug

Respray body frame

Respray engine cover

Respray bloc & head

 

New rim 2xx

New dunlop tyre 2xx

Original CDI 250RM

HEL brakeline 2xx

Brake front and rear pads 1xx

Brake caliper 2xx LOCAL

Brake disc 1xx

KYB shocks 150RM

Ori Riderfoot peg 65RM

Ori pillion foot peg 65RM

Ori Pillion stand L/R 185RM

Swingarm 285RM ORI

Petrol reserve valve 50RM

Petrol floater 50RM

Original seat 135RM

Original Mirror 40RM

Full set SS screws for whole bike. 1xx

Rxz coverset Conversion 680RM

oem coverset

Headlight

Headlight bracket

Tailight

Tailight bracket

Signal light left right

 

Didn't add up the "xx" its already 5855. I leave it xx because i couldn't remb the exact price, if were to add the "xx" i guess would be at least 6200RM. Panjang gave some discount because i rebuild everything one shot damage was 5750. Overall satisfactory result from AGL panjang.

 

What you guys think about the price ? Reasonable or expensive

[limk0pi83]

bro expensive la brader.

[limk0pi83]

u stay ys which block, can go limkopi.

[Pendek]

Hmmm thread has been dead for a year over? Let's bring it back from the dead aye.. First post for 2019 😁✌🏼️

[kaizersg]

[BALYSA]

i guess there's not many riding rxz here.... seen lots on the road tho...

 

all in msn groups bro Bluestacks Lucky Patcher Kodi . someone use my email to subscribe, and i cant seem to unreg to re-reg.

Edited October 6, 2019 by BALYSA

[kaikai92]

Hi RXZ riders,

 

Woudl appreciate if anyone can give abreakdown of the different RXZ, liek japan RXZ, Catalyzed, 5pv etc... totally confused by these different models and what difference they have =(

[SANITY]

Hi, want to ask is it legal to install dry clutch on RXZ in Singapore?