Home of CBR600

[Prankster]

how does the car headrest help to enable you to sit closer to the pillion?

 

the headrest will so call 'cover up' the gab between the pillion seat and the rider's ass. haha. this will make the pillion more comfortable to sit closer to the rider as he/her butt won't be half in air and half on the pillion's seat. but i think still quite uncomfortable. pillion will need to use alot of thigh muscles man.. been one b4 on my frnd's rr8. best thing you can do about it is either you shave the pillion's seat at a diagonal angle or change to a SBK race tail fairing i guess. any better ideas?

 

Hmm... Jin meng almost rite, but let me explain, i just put the car's headrest in between the rider and the pillion's seat, covering the fairing part.... Than my pillion will seat on the headrest instead... Yupz... Thats it...

 

herlo guyz..i'm new in tis thread..i jaz wanna ask,how much does it cost for akrapovic full system cost ah for cbr600rr 08???..

 

If i'm not wrong, i think its about 1.8k - 2.2k.... Somewhere around that range...

[DM]

my bike was parked at my house..

 

guys, what are your preload and compression damping settings for the front forks? i just set it back according to the manual. both are turned fully clockwise towards hardest setting first then 2 turns towards soft until the marking dots match. don't know if i should go play with it or leave it like that..

[jin_meng]

Hmm... Jin meng almost rite, but let me explain, i just put the car's headrest in between the rider and the pillion's seat, covering the fairing part.... Than my pillion will seat on the headrest instead... Yupz... Thats it...

 

ah.. but just a question. how do you secure the headrest to the bike? i intend to do that until i get e race fairings.

 

 

If i'm not wrong, i think its about 1.8k - 2.2k.... Somewhere around that range...

 

so cheap? leo vince full system is about 2.2k.

[Sn0w_MaN]

bro if u r not a hardcore tracker get end can will do akra end is powerful enough... Well save the few hundred bucks for better air filter. I have did some survey on that so that is my advice...

 

 

herlo guyz..i'm new in tis thread..i jaz wanna ask,how much does it cost for akrapovic full system cost ah for cbr600rr 08???..

[Sn0w_MaN]

Well i try it on davin bike true enough it's very hard to share sit and doesnt feel good as a pillion. Advice not to do so to your gf or female fren.

 

Hey i heard the cbr600 cant share seat with pillon unlike the r6 and suzukis.

Anyone can confirm this?

 

Davin also MIA from the Sengkang riders...

[Sn0w_MaN]

Dear all davin have really MIA from forum if someone close to him pls try to find more info about it can. I called him once and msg him a no of time but no reply at all. I am very concern to him as a fren and a rider too, pls try to help if possible

[Sn0w_MaN]

hey prankster alarm wise mainly ppls are using make in china alarm. Well i do have a mass order link for alarm when i use to purchase it when i ride rvf. Well i will find the link and post it soon to u all, not too bad that i use last time but eat into batt not advisable for us to use since we use electic starter. My fren encounter once use for 1yr then batt flat due to that alarm problem and in the end got to tow it to bike shop, since then you change to disc patlock and he found more useful then any alarm.

[Sn0w_MaN]

well enfant got to be careful nowaday those ppls are clever can do anything to ur bike... once at my house carpatrk i saw 1 bike cover the bike as well then someone to tear of the cover and cut open the sit. My bike cover was also taken away but lucky my bike nothing happen. I advice got time check you bike once a while in case something hapen to it.

 

my bike was parked at my house..

 

guys, what are your preload and compression damping settings for the front forks? i just set it back according to the manual. both are turned fully clockwise towards hardest setting first then 2 turns towards soft until the marking dots match. don't know if i should go play with it or leave it like that..

[DM]

Dear all davin have really MIA from forum if someone close to him pls try to find more info about it can. I called him once and msg him a no of time but no reply at all. I am very concern to him as a fren and a rider too, pls try to help if possible

 

 

hope this helps:

 

http://www.singaporebikes.com/forums/member.php?u=38777

Last Activity: 20-04-2008 06:47 PM

[Sn0w_MaN]

hey thank alot... MIA since april haiz...

[Prankster]

my bike was parked at my house..

 

guys, what are your preload and compression damping settings for the front forks? i just set it back according to the manual. both are turned fully clockwise towards hardest setting first then 2 turns towards soft until the marking dots match. don't know if i should go play with it or leave it like that..

 

I suggest u bring it to a bikeshop and get a mechanic to inspect it... Better safe than sry.... Anyway, dun think it will cost u anythin expect some time wasted...

 

ah.. but just a question. how do you secure the headrest to the bike? i intend to do that until i get e race fairings.

 

The headrest will have a strap. U open ur pillion seat, put the strap over the 2 clips den u close ur pillion seat.... N its done.... If u need pics, u let me noe, than i will try to find some time to get it up for u....

 

 

Well i try it on davin bike true enough it's very hard to share sit and doesnt feel good as a pillion. Advice not to do so to your gf or female fren.

 

Y ah? i tot the guy will feel more uncomfortable...??

 

Dear all davin have really MIA from forum if someone close to him pls try to find more info about it can. I called him once and msg him a no of time but no reply at all. I am very concern to him as a fren and a rider too, pls try to help if possible

 

Yes, pls help....

[matrix20xx]

yo bro, can guide me to tat page, coz i hv been searching for the page for quite sometime... THanks a million...

 

 

Regardin ur alarm, i aso ask b4 a few replies back.... But nobody ans leh.... Haha...

 

Anyway, regardin ur fuel 1st bar.... I think we discuss this before too... A few pages back.... But den i dun mind lettin u noe again.... Mine is about 85-90km than 1st bar gone....

 

btw, anyone noe roughly the price for LV slip-on & where to find it?

Which pipe sound better: LV or AKRA??

THanks a million

 

P.S: got a gd link to share with u guys -->

http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/1/Make/Honda/YearID/49/Year/2008/ModelID/8033/Model/CBR600RR/

[Sn0w_MaN]

u want sound or preformance.... after all akra rating is good but u check with others will be better. I have fall in love with akra already

[Ryozok]

hi guy im new to cbr600 i just downpay a cbr600 from albert motor any tip on the running in part should i go for a dyno run in or? nv get a new bike b4 this is my first time... hope someone out there will help mi out =) cheer

[DM]

hi guy im new to cbr600 i just downpay a cbr600 from albert motor

 

dude, good luck to you

 

 

 

 

on the subject of running in, you could check out

http://www.600rr.net/vb/showthread.php?t=77603 too. personally, i say NO to hard run in.

[Ryozok]

dude, good luck to you

 

 

 

 

on the subject of running in, you could check out

http://www.600rr.net/vb/showthread.php?t=77603 too. personally, i say NO to hard run in.

 

why good luck to mi is it not a good bike to get?

[Ryozok]

u mean we do a hard break in is better for the bike???? btw can i know which full systerm is good for cbr600rr 08

[DM]

read my post again.

[Sn0w_MaN]

bro as i advice earlier on if u dun track dun waste $$$$ get full system singapore road can run so fast save the $$$ to upgrade ur parts. If u do planning to play track then full system will be better. My all time fav is akra but u can consider yoshi or LV also.

 

BTW how much albert qoute u on the road???

[Mussolini]

for LV, look for MSF67.. he will give u the review

[matrix20xx]

u want sound or preformance.... after all akra rating is good but u check with others will be better. I have fall in love with akra already

 

how much is it for the AKRA? which model? where u install it? THanks

[matrix20xx]

hey got this FE that uses the original taillights...

 

http://www.hardracing.com/images/1h607.jpg

[Prankster]

yo bro, can guide me to tat page, coz i hv been searching for the page for quite sometime... THanks a million...

 

 

 

 

btw, anyone noe roughly the price for LV slip-on & where to find it?

Which pipe sound better: LV or AKRA??

THanks a million

 

P.S: got a gd link to share with u guys -->

http://fiche.ronayers.com/Index.cfm/Module/Main/TypeID/26/Type/Motorcycle/MakeID/1/Make/Honda/YearID/49/Year/2008/ModelID/8033/Model/CBR600RR/

 

http://www.singaporebikes.com/forums/showthread.php?t=149455&page=19

 

there u go....

 

hi guy im new to cbr600 i just downpay a cbr600 from albert motor any tip on the running in part should i go for a dyno run in or? nv get a new bike b4 this is my first time... hope someone out there will help mi out =) cheer

 

There's no tip really, just try to keep ur rpm below 6000 during ur 1st 2000km and change ur MINERAL OIL say around 3-4 times for ur 1st 2000km....

 

Once 2000km completed, change to EO, than ready to blast liao.... But do it gradually.... Dun one shot suddenly blast...

 

hey got this FE that uses the original taillights...

 

http://www.hardracing.com/images/1h607.jpg

 

Oh my, that looks better than my original tail light.... May i noe when can i get it from???

[matrix20xx]

http://www.singaporebikes.com/forums/showthread.php?t=149455&page=19

 

there u go....

 

THanks

 

Oh my, that looks better than my original tail light.... May i noe when can i get it from???

 

Saw it in this website http://www.hardracing.com/FenderEliminators/Honda.htm

Dont noe whether is it available in SG...

I nv order anything overseas....

scare kana cheated...

anyone got any experience???

mayb can mass order and can get cheaper...

[Sn0w_MaN]

well bro sad to say everything is still undergounding to be done up... i think the CF model are more ex average abt 1.4-1.6k end can only if not normal one i think 800++ t0 abt 1k can get liao

 

how much is it for the AKRA? which model? where u install it? THanks