[Group] YAMAHA Rx, Rx-S & Rx-K

[weileo]

i just got my front tyre replace. I went GNG at ubi( recommended by tony ). I paid abt $50 for a japan dunlop tyre ( can.t rmb the model ) size 275. Frenly & helpful staff (tai kong).

[weileo]

anyone know where can i get headlight bracket for my K.

[mivec01]

anyone know where can i get headlight bracket for my K.

[ATTACH]112228[/ATTACH]

 

can try auto machinery...

[logen1836]

So in that case how about we meet and go hunt for the 2nd hand item together??

 

all right bro! set! u can contact me @ 90264064.

[logen1836]

not quite sure abt the price..maybe between 50 to 80..how about u bring the tank to the shop...

 

thats all? wads e exact address of e shop,bro?

wanna get quotations for left/right engine case,front fork, swingarm & handlebar stem.

 

agreed with u..im using front bt-39 battlex and rear dunlop tt100..made in japan..safety cannot be compromise..

 

yeah bro..safety cannot be compromised! not worth using a cheapo tyre & risk ya life!

 

yap that the problem..cannot leave water stain...it will leave a mark...i ever high polish my both super 4 vtec rim before...must always wipe dry..if not having difficult time polishing it...

 

same same! i always did dat for my previous version s too.

after it stops raining,i will wipe it off dry.

 

can go ah boy...ask for japan tyre..both battlex and dunlop for 80 to 90 each..

 

yeah..price is ard dere..

[ProFatSir]

i just got my front tyre replace. I went GNG at ubi( recommended by tony ). I paid abt $50 for a japan dunlop tyre ( can.t rmb the model ) size 275. Frenly & helpful staff (tai kong).

 

GNG is @ defu lane!!!

 

i think you change the tyre is dunlop f18 size 275.

[ProFatSir]

RX KAKI clan leaders.....

 

when is the next meet up????

 

i now comfirm with the CG-rians fot the meet up part.maybe on a sat nite or sun night.

[cerealkiller]

of cos i got c o c k la... anyw i nv say the dunlop roadmaster for 45 bucks is made in japan what. but next time if i change i will go jap

[sabrove]

of cos i got c o c k la... anyw i nv say the dunlop roadmaster for 45 bucks is made in japan what. but next time if i change i will go jap

 

Relax, chill bro. We still noob mah, we have to flock together and help each other. Strength in numbers but still down to earth, humble, chill and be happy but nonetheless, we dun be paiseh or feel offended lah, just learn from the pros!

And if u going to Japan.. ask me along too. Just in case i decided to change my engine oil or sumthing.. ha ha ha ha. But then, we can change the EO ourself, DIY, so why go Japan! ok i havent take my mental meds, so dun mind me!!

 

btw mr mivec01, the blok nenas how much it cost ah. Last year a fellow forum-er want to sell me @ $80 but i delayed in buying in the end, i lost contact with the guy. I thought of getting one ah.

Edited July 5, 2009 by sabrove

[ProFatSir]

of cos i got c o c k la... anyw i nv say the dunlop roadmaster for 45 bucks is made in japan what. but next time if i change i will go jap

 

we always talk in this manners leh!!!!hahaha sab scare already heehe

 

Relax, chill bro. We still noob mah, we have to flock together and help each other. Strength in numbers but still down to earth, humble, chill and be happy but nonetheless, we dun be paiseh or feel offended lah, just learn from the pros!

And if u going to Japan.. ask me along too. Just in case i decided to change my engine oil or sumthing.. ha ha ha ha. But then, we can change the EO ourself, DIY, so why go Japan! ok i havent take my mental meds, so dun mind me!!

 

btw mr mivec01, the blok nenas how much it cost ah. Last year a fellow forum-er want to sell me @ $80 but i delayed in buying in the end, i lost contact with the guy. I thought of getting one ah.

 

go japan!!!

[mivec01]

Relax, chill bro. We still noob mah, we have to flock together and help each other. Strength in numbers but still down to earth, humble, chill and be happy but nonetheless, we dun be paiseh or feel offended lah, just learn from the pros!

And if u going to Japan.. ask me along too. Just in case i decided to change my engine oil or sumthing.. ha ha ha ha. But then, we can change the EO ourself, DIY, so why go Japan! ok i havent take my mental meds, so dun mind me!!

 

btw mr mivec01, the blok nenas how much it cost ah. Last year a fellow forum-er want to sell me @ $80 but i delayed in buying in the end, i lost contact with the guy. I thought of getting one ah.

 

 

Hi there,

 

The top blk u can get at auto machinery... they are selling at $90 yo $100... but black in colour..i sent it to high polish cost me $30..last year i also sold1 here..i sold it for 70 if im not mistaken...hope that help

[logen1836]

Hi there,

 

The top blk u can get at auto machinery... they are selling at $90 yo $100... but black in colour..i sent it to high polish cost me $30..last year i also sold1 here..i sold it for 70 if im not mistaken...hope that help

 

hey bro. jus a noob question.

wad is the diff btw a racing black & a normal block?

if u use a racing block, it wld result in higher maintenance rite?

[mivec01]

hey bro. jus a noob question.

wad is the diff btw a racing black & a normal block?

if u use a racing block, it wld result in higher maintenance rite?

 

the different is ur pick up responce is better and quicker...normal block also able to do as u need to sent to shop for grinding the top part...if wanna good performance ur below block must do a potting and using a good carb..

[logen1836]

the different is ur pick up responce is better and quicker...normal block also able to do as u need to sent to shop for grinding the top part...if wanna good performance ur below block must do a potting and using a good carb..

 

oh ok! nvm,i will stick to the stock block.

however,i tot of getting a new original RXK block

and send it for hard polish b4 fitting it to my bike.

wad u tink? is it a good idea?

[Lord Bear]

This thread have gone to 'Racing mode'. 'Vintage Mode' is DEAD oreadi!!!!!

[txwsg]

guys i wanna go malaysia!!

 

can someone bring me!? i wanna check out the place. and have some makan!!

 

weileo!! did you manage to change your rims? i also feel like changing mine to stainless steel ones if got.

 

btw people, is it advisable to change to 72 spock rims? what are the pros and cons?

[mivec01]

oh ok! nvm,i will stick to the stock block.

however,i tot of getting a new original RXK block

and send it for hard polish b4 fitting it to my bike.

wad u tink? is it a good idea?

 

wat u mean?is it the top part only or the hole block?i got one head block...u can borrow then give it back to me.. u can sent urs for high polishing then..

[mivec01]

This thread have gone to 'Racing mode'. 'Vintage Mode' is DEAD oreadi!!!!!

 

sorry to hear that bro...its not racing thread...but we must keep our engine in good performance too bro...

[txwsg]

no no.. this thread not vintage mod.

 

this thread is singaporean rxk thread.

 

which means we want everything nice nice.. bike fast fast.. fc low low.. outlook swee swee. EVERYTHING CHEAP CHEAP.

[txwsg]

sorry to hear that bro...its not racing thread...but we must keep our engine in good performance too bro...

 

keep it coming bro!!

[txwsg]

Hi there,

 

Thanks for the commendation...actually those pic is taken around 9 years ago after i revamp the bike..i got one bike shop that is in jb..i very rare service bike here...Till now im still riding the same bike.

 

the block head u mentioning is the block nenas..in english Pineapple head block..haha...still can be reach at auto machinery shop...

 

Im staying at 365...maybe one day can organize meeting season...any body here into hobby of fishing...???

 

btw idris, you know where is good to service bike near yishun? i havent been able to find any. went to the yishun industrial before.. but so many shops sia..need to get my engine looked at. when you go jb bring me leh.. i also wanna check out jb.

[cerealkiller]

we always talk in this manners leh!!!!hahaha sab scare already heehe

 

hahaha ya la sab relak! tony, bear and chris are like my mentors to riding. and i meant using made in japan tires next time... not go japan. unless i strike 4d or toto then maybe

[ProFatSir]

hahaha ya la sab relak! tony, bear and chris are like my mentors to riding. and i meant using made in japan tires next time... not go japan. unless i strike 4d or toto then maybe

 

your coe renew?

[mivec01]

btw idris, you know where is good to service bike near yishun? i havent been able to find any. went to the yishun industrial before.. but so many shops sia..need to get my engine looked at. when you go jb bring me leh.. i also wanna check out jb.

 

Sorry bro.i never do servicing in SG before...i only buy the parts and do it at JB...

 

For sure..1 day i bring u to my JB moto shop...

[logen1836]

wat u mean?is it the top part only or the hole block?i got one head block...u can borrow then give it back to me.. u can sent urs for high polishing then..

 

top block only. relly? u dun mind lending me urs?

oh my..ur so nice,bro!

looks like all e forumers in RXK thread are all so nice..

i will inform wen im gona go dere aite..

i need to go with ya anyway to do e hard polish.

dun noe where to do.

im left with getting a rxz meter.

den im ready to change to 12V too.

can ya JB mech do that?