[Group] SUZUKI GSR 400/600

[furious_88]

hmm, i assume when u just bought this bike, this problem didn't exist right? how old is ur bike? anyways, i use to have this problem with my current bike. not GSR. but after i service my FI, the jerking is gone. just MAYBE ur FI is clogg. good luck!

 

Oh it's a used bike, jerking only if I nvr use clutch control. It's abt 2 yrs bike . Will take note of that

Edited September 24, 2010 by furious_88

[-PiE-]

Talked about it yesterday........

 

http://www.singaporebikes.com/forums/showthread.php/302268-new-suzuki-gsr750

 

I guess my 2nd bike will come soon....very very soon.........

 

the swing arm is ugly seh!!! macam the gladius. chepo looking swing arm. everything else looks hot. and the swing arm has to spoil it. i think they rather use a gsr or gsxr swing arm instead pls... if yes, i also may consider. hehe!

[IvikaRazI]

Its juz a drawing hahha...lets see what the actual thing will look like in 3 weeks time.

[-PiE-]

i can't seem to put in a picture for my signature. someone help.

[EJ]

Thanks dzal. I'm considering supersprox for my next sprocket set change..

[breadpower]

hi guys i jus had a self ski jus now n my bike now is suffer from great damange. front fork bend, disk brake crack on one side, left side signal crack, tail borad on the left side crack, foot rest n gear shift level crack, handle bar bend abit,brake n clutch lever bend n the worst is frame slider crack. wan to ask which are the part tat i can get myself cheaper instead of everything let the bike shop do?

Edited September 23, 2010 by breadpower

[furious_88]

hi guys i jus had a self ski jus now n my bike now is suffer from great damange. front fork bend, disk brake crack on one side, left side signal crack, tail borad on the left side crack, foot rest n gear shift level crack, handle bar bend abit,brake n clutch lever bend n the worst is frame slider crack. wan to ask which are the part tat i can get myself cheaper instead of everything let the bike shop do?

 

So many things need to change, Best change all in a shop save ur trouble going here and there

[googly.zar]

Sorry to hear that.. It's better to go to 1 place n do replacement. Save the hassle.. Maybe u can check with looi's motor for some of the parts replacement. Could be ex tho.. Btw at wad speed did u skid? Hope u are ok.. Hate to see fellow riders hitting the tarmac for whatever reason. Ride safe people!

[testamant]

Its juz a drawing hahha...lets see what the actual thing will look like in 3 weeks time.

 

I hope it does change or being rendered a bit from the drawing cause,the design is now somewhat on par with CB1000r naked version and the fazer 8..the swingarm,front half fairing and the headlight looks the same =)ehehe

 

i can't seem to put in a picture for my signature. someone help.

 

You go put the required photos in photobucket,then they have a link that can be embedded ito ur signature..just copy the link and paste it in ur siggy...bro!!!

[EJ]

hi guys i jus had a self ski jus now n my bike now is suffer from great damange. front fork bend, disk brake crack on one side, left side signal crack, tail borad on the left side crack, foot rest n gear shift level crack, handle bar bend abit,brake n clutch lever bend n the worst is frame slider crack. wan to ask which are the part tat i can get myself cheaper instead of everything let the bike shop do?

 

You self-skided until so bad huh. How fast were you going? The damages are so bad even my first accident with a taxi also not until like that..

 

My guess is send it to a bike shop and let them settle. Cause if you're going to get the part yourself from agent it's going to cost you much more. Agent normally sell parts more expensive to walk in customers..

[Lexanez]

Ugh, ouch! Its heartening to know that you are alright. Another option to get parts would be from KS motors at Jalan Besar. Guess it would be better to get repairs done at a workshop, Unique motorsports? Prolly they could give you a discount since the amount you'll be paying is not quite a small sum.

 

Take this as a lesson and come out as a better rider, alright?

[breadpower]

You self-skided until so bad huh. How fast were you going? The damages are so bad even my first accident with a taxi also not until like that..

 

My guess is send it to a bike shop and let them settle. Cause if you're going to get the part yourself from agent it's going to cost you much more. Agent normally sell parts more expensive to walk in customers..

 

yeah its so bad..i'm going at 70km/h approaching cross junction when there is this car infornt of me do a e-brake when his front wheel cross the stop line n there is a distance from me n i also do a e-brake but my front wheel lock n i self ski. I see.. right now my bike is at Unique motorsports so i guess i will jus let them settle it.. thanks alot bro for ur advise.

 

Ugh, ouch! Its heartening to know that you are alright. Another option to get parts would be from KS motors at Jalan Besar. Guess it would be better to get repairs done at a workshop, Unique motorsports? Prolly they could give you a discount since the amount you'll be paying is not quite a small sum.

 

Take this as a lesson and come out as a better rider, alright?

 

ya my bike now is with them hopefully they can help me out.. thanks bro

Edited September 24, 2010 by breadpower

[Kazuma]

Lucky u are ok. Most impt is rider ok

[-PiE-]

yeah its so bad..i'm going at 70km/h approaching cross junction when there is this car infornt of me do a e-brake when his front wheel cross the stop line n there is a distance from me n i also do a e-brake but my front wheel lock n i self ski. I see.. right now my bike is at Unique motorsports so i guess i will jus let them settle it.. thanks alot bro for ur advise.

 

 

 

ya my bike now is with them hopefully they can help me out.. thanks bro

 

bro, how did ur frame slider crack? isn't it suppose to be sliced n worn if u skid? what brand did u use? u don't have fork sliders? it's important too. anways, in stead of changing the plastic parts, u can send it for fibre patching. it's cheaper than getting a new one. than spray ur own colour lo. like the YELLOW BEAST! get the list that u need replacing, get the quotation from unique, than also try to go ask ur self tan compare the price. to save money u got to work hard for it bro! for levers, i think it's cheaper to rebend or get the "TITAX" look a like one. for the gear lever, they can bend straight back, they did once for me. but no promises said by them. it can break. for brake disk, u can try ebay. haha!

[-PiE-]

Anyways breadpower, life n limb is always better than bike. glad to hear another gsrean is safe from an excident. take it as a lesson learn. ride safe bro!

[-PiE-]

I hope it does change or being rendered a bit from the drawing cause,the design is now somewhat on par with CB1000r naked version and the fazer 8..the swingarm,front half fairing and the headlight looks the same =)ehehe

 

 

 

You go put the required photos in photobucket,then they have a link that can be embedded ito ur signature..just copy the link and paste it in ur siggy...bro!!!

 

alamak, photobucket? kene bukak account ah ni... ish.

[furious_88]

anyone riding along CTE towards City, wearing black t-shirt today? FBA46xx.

[xindes]

anyone any idea on how to go jb topup petrol? first time..

need to go by woodlands checkpoint

[breadpower]

bro, how did ur frame slider crack? isn't it suppose to be sliced n worn if u skid? what brand did u use? u don't have fork sliders? it's important too. anways, in stead of changing the plastic parts, u can send it for fibre patching. it's cheaper than getting a new one. than spray ur own colour lo. like the YELLOW BEAST! get the list that u need replacing, get the quotation from unique, than also try to go ask ur self tan compare the price. to save money u got to work hard for it bro! for levers, i think it's cheaper to rebend or get the "TITAX" look a like one. for the gear lever, they can bend straight back, they did once for me. but no promises said by them. it can break. for brake disk, u can try ebay. haha!

 

yeah the slider really crack n the bolt holding it is bend.. the brand tat i use i will pm u n u tell ur friend to change if they are using it. Unique motor has give me the qoutation already its $3388 n its alot n i do not know should i claim my insurance anot n also can still claim rit now anot. do u guys think i should claim from insurance??

[IvikaRazI]

yeah the slider really crack n the bolt holding it is bend.. the brand tat i use i will pm u n u tell ur friend to change if they are using it. Unique motor has give me the qoutation already its $3388 n its alot n i do not know should i claim my insurance anot n also can still claim rit now anot. do u guys think i should claim from insurance??

 

Its simple...if you claim from your insurance, next year when you renew, your premium will go sky high. Anyway, can see the breakdown of what will be done for that amount? I am not saying I do not trust them, juz curious. You may want to get a second opinion from another shop like planet or motoworld.

 

If not, try to get the bike up and running first. Like if the front fork bent, can see if can press back. Cosmetic items like tail board, can do later. Maybe can hide the scars by sticker or something. That may bring down the repair cost.

[NazAdidas]

yeah the slider really crack n the bolt holding it is bend.. the brand tat i use i will pm u n u tell ur friend to change if they are using it. Unique motor has give me the qoutation already its $3388 n its alot n i do not know should i claim my insurance anot n also can still claim rit now anot. do u guys think i should claim from insurance??

 

WaH BrO JUsT See Ur BiKe @ UM JUsT NoW..U SkiD On LeFt SiDe sLiDeR DaMaGe TaiL BoaRd aLsO DaMaGe..BuT Hw CoMe BoTh ForK BeND InsIDe Ur BRaKe DisC aLsO BrOkeN

[NazAdidas]

anyone any idea on how to go jb topup petrol? first time..

need to go by woodlands checkpoint

 

whicH PeTrOl KiOsK sheLL Or EssO??mY aDViCe Dun Go DuRiNg PeaK PerioD iF u R 1St Time..JaM & aLoTSa KapChai GoinG BaCk JB..

BeSt TiMe 9pm tO 10PM(10PM ONWARD jAm SO bAd tiLL cLeaR aRd miNiteZ)

[mmkbad]

whicH PeTrOl KiOsK sheLL Or EssO??mY aDViCe Dun Go DuRiNg PeaK PerioD iF u R 1St Time..JaM & aLoTSa KapChai GoinG BaCk JB..

BeSt TiMe 9pm tO 10PM(10PM ONWARD jAm SO bAd tiLL cLeaR aRd miNiteZ)

 

Ideally, best time is during the day, from 1pm-5pm departing from Singapore. No jam watsoever. If u are a night owl, go after 1am, the jam should have cleared already. Avoid the checkpoint at all costs from 6pm-10pm if u are a first timer, u love your ride and dun want it to get scratched. The riders from JB usually rush home during this time, and wont hesitate to cut queue if u are slow and inexperienced.

[furious_88]

Ideally, best time is during the day, from 1pm-5pm departing from Singapore. No jam watsoever. If u are a night owl, go after 1am, the jam should have cleared already. Avoid the checkpoint at all costs from 6pm-10pm if u are a first timer, u love your ride and dun want it to get scratched. The riders from JB usually rush home during this time, and wont hesitate to cut queue if u are slow and inexperienced.

 

Normally I go in from 10am-12noon this is the best timing too

[Kazuma]

I go by 2nd link. Can clear carbon n play abit of cornering