[CLOSED] SBF Yamaha Spark135

[lost_soul]

dun mind me.. i had to say this....

 

which biker didnt start from 1 N 2 3 4 5 6 gearing?

 

you sound 'special' in your post...

 

cheers!

+1

 

handicapped bikers? heehee...

 

+1!

[xiaobanz]

bro next week there is a DIY session for EO and sparkplug change... there isnt a standard on wat EO to change it depends on individual... so to personal preference... semi or fully...

 

Yos, btw when is you guys DIY session, cos me in the army then really wanna joi you guys to learn more on the bike.

 

Btw, how come when my bike run at about 80km/h at gear 4, it sounds like it's dragging. Then when my pillion my fren, he said that when about 70 ~ 80, the bike like vibrating.

 

I tested myself on the expressway, i sat really behind then travel at about 80km/h. I found that the bike is vibrating a lot. But when i push to 100km/h it became normal.. Scary wor..

[y0s_bikey]

Yos, btw when is you guys DIY session, cos me in the army then really wanna joi you guys to learn more on the bike.

 

Btw, how come when my bike run at about 80km/h at gear 4, it sounds like it's dragging. Then when my pillion my fren, he said that when about 70 ~ 80, the bike like vibrating.

 

I tested myself on the expressway, i sat really behind then travel at about 80km/h. I found that the bike is vibrating a lot. But when i push to 100km/h it became normal.. Scary wor..

 

weekend diy will b organised as well if there is respond... but currently we dun even have respond to the thread so i cant promise anything...

bro u cant test when u are sitting more to the rear as the weight distribution is out le it bcame the front too light even worse if u have box in the rear... well for the vibration part all i can say is every bike will have this prob... at certain speed certain rev the bike will respond differently... ur spec of ur bike oso cause a factor...

 

jus some opinions...

[Jz69]

Any spark 135 coi to let go?

[hanrxk]

any of u guys have change ur clutch plate?

most of my frens riding spark hav prob with their clutch plate..

some say its clutch plate problematic one. true?

[Dr Wong]

not new 125z is Y-125 a new yamaha sport bike but is SOHC and 4-stoke look alike R6

[fusionzone]

any of u guys have change ur clutch plate?

most of my frens riding spark hav prob with their clutch plate..

some say its clutch plate problematic one. true?

 

 

Problematic a not i not sure but i changes mine already my fren also change one already both bike near 1 yrs only

[Refugee]

if accelerated too hard, my clutch will slip and drop gear... scary.. haha

[xiaobanz]

weekend diy will b organised as well if there is respond... but currently we dun even have respond to the thread so i cant promise anything...

bro u cant test when u are sitting more to the rear as the weight distribution is out le it bcame the front too light even worse if u have box in the rear... well for the vibration part all i can say is every bike will have this prob... at certain speed certain rev the bike will respond differently... ur spec of ur bike oso cause a factor...

 

jus some opinions...

 

Hmm, ok. Then I think I will have to send to the workshop to have it checked it out. Cos my fren say it's vibrating way more then the first time I pillion him. Do you guys think it's good to send it back to hong leong for full check or just send to a normal workshop? Do you think hong leong charge more but they do through checks?

 

If there are any other weekend DIY i don't mind joining. Beats reading the manuel (very complicated).

[y0s_bikey]

if accelerated too hard, my clutch will slip and drop gear... scary.. haha

 

u are refering to ur present ride or sparks? slip gear could be due to in proper running in... excessive additives added into EO dat over smoothen the gears...

[y0s_bikey]

Hmm, ok. Then I think I will have to send to the workshop to have it checked it out. Cos my fren say it's vibrating way more then the first time I pillion him. Do you guys think it's good to send it back to hong leong for full check or just send to a normal workshop? Do you think hong leong charge more but they do through checks?

 

If there are any other weekend DIY i don't mind joining. Beats reading the manuel (very complicated).

 

my opinion la... not really neccessary to send back to hong leong... cos its not as thou those major things u need to do... unless ur ride is a rare ride which not much shop know how to touch it... but overall its really not worth it... as for the vibrations all i would say wear and tear even u go bike shop its oso wear and tear too... unless u tell me exact how bad it is and where mayb i can help u... if not save the money and do other maintains la... mayb u will like to check ur bearings as they might b worn out too...

[Refugee]

u are refering to ur present ride or sparks? slip gear could be due to in proper running in... excessive additives added into EO dat over smoothen the gears...

 

haha... prev ride happened a few times... could be clutch or could be my toes.. haha...

 

current ride also slipping alot.... which is normal i guess.. servicing time soon!

[y0s_bikey]

haha... prev ride happened a few times... could be clutch or could be my toes.. haha...

 

current ride also slipping alot.... which is normal i guess.. servicing time soon!

 

woo... current keep slipping too... is dat norm? im not too sure bout dat... but from wat i know its shouldnt ma...

[lost_soul]

haha... prev ride happened a few times... could be clutch or could be my toes.. haha...

 

current ride also slipping alot.... which is normal i guess.. servicing time soon!

 

automatics tend to have flat spots one leh... but your mileage suggests its servicing time. haha....

 

change to a lighter roller!

[mINg24]

hohoho.. join the sparks135rr family.. finally got my license back after so long.. swee swee today 1st time tp pass liao..today went to i-motoring and immediately bought it after a whole afternoon asking frens to come down to view and inspect..(know it's not really my style but this bike just get me so into it..*paiseh for my angmoh.) though not fully stock, but i prefer modified bikes.. but only comestic la.. racing pedals,new battalax tires,led underneath,ring..etc..etc.. bought it total for 4.6k(inculded insurance,transfer fee.. everything~) For a secong-hand FBA **76 H plate.. anyway.. just wanna see u guys can comment the price is ok? got kena chop anot? i know bike shop goes ard 7/8% annum interest.. but that salesperson told me they count as what year block interest 1 shot den become so much after tax..gst..transfer fee.. he quoted me 3k but after my insurance.. mine is 600 for a 2nd party.. so 3000+600+150+40=3790. den after gst 3790 x 107%=4055 ..i down 1000 deposit so become 4055-1000=3055.den thats when he tell me what annum block interest den he press the calculator 3055 x 124%= 3788/24mths= 157/mth but he give me 150/mth.. is this reasonable or just bullshit? did really some motor shop comes with this type of policy? the price ok? just wanna cmf i din kena con or what.. cos i did test ride at the nearby carpark the ride seems smooth and engine sounds ok at least to me.. Anyway.. anyone here is the previous owner of this bike? i bought it at Alexandra i-motoring.. colour is pearl white with a bit blue.. The owner here? if yes.. tell me more on this bike pls.. ya.. btw.. The plate is FBA *876 H.

ya anyway again..( sry so many anyway...) ya.. anyway hope u all dun mind me saying so much stuffs.. lolx..

[Refugee]

yah.... mine keep slipping... cos from what i read... its the accumulation of dust inside... bought over until now.. lazy and no money to do full servicing... haha...

 

lost_soul.. wait lah.... abit more nia... 800+ km.... do it at the 12k mark... lol

[fo33il]

halo..

 

anyone using the rear hugger from wingyap?

wat is the clearance between the tire n hugger?

wat rear size u use?

 

tq..

[xiaobanz]

HELP!!!!!!

 

Guys, some contractor went to do some painting in my camp and the paint dripped all on my bike!!!!! OMG!! Going to complain about the contractor. But got anything i can do to remove the paint from the bike?? OMG!! My heart stopped when I saw paint marks all over my bike man.. My seat, mirror, box, everything.. I tried using water and some oil which removed some of the stains, but i cannot use oil for the bike's paint work as i heard it's bad for it. Even my box stain's cannot be removed.

 

Guys got any idea on how to fix. I heart really broken when i saw it..

[y0s_bikey]

HELP!!!!!!

 

Guys, some contractor went to do some painting in my camp and the paint dripped all on my bike!!!!! OMG!! Going to complain about the contractor. But got anything i can do to remove the paint from the bike?? OMG!! My heart stopped when I saw paint marks all over my bike man.. My seat, mirror, box, everything.. I tried using water and some oil which removed some of the stains, but i cannot use oil for the bike's paint work as i heard it's bad for it. Even my box stain's cannot be removed.

 

Guys got any idea on how to fix. I heart really broken when i saw it..

 

oh dats sad... complain to ur head... see wat they say lo... i dun think there is anyway to wash off lei.. if u use too corrosive solution to clean ur paint might drop off too...

[Refugee]

HELP!!!!!!

 

Guys, some contractor went to do some painting in my camp and the paint dripped all on my bike!!!!! OMG!! Going to complain about the contractor. But got anything i can do to remove the paint from the bike?? OMG!! My heart stopped when I saw paint marks all over my bike man.. My seat, mirror, box, everything.. I tried using water and some oil which removed some of the stains, but i cannot use oil for the bike's paint work as i heard it's bad for it. Even my box stain's cannot be removed.

 

Guys got any idea on how to fix. I heart really broken when i saw it..

 

generally, there are 2 types of paint.

 

water based and oil based...

 

if the paint thats on your bike is paint that is applied to walls and ceilings, fret not... it should go off after a few washes...

 

if its oil based paint that it gets abit more tacky.... btw... what paint work do you have?

 

spark135 doesnt really have a 'paint work' per se....try whatever remover you have on a small spot first if you're really worried.

[sutharsan]

hi there,

 

Recently, i realised that i am having some problem with my spark135.

whenever i try to press the front brake, the bike tends to jerk quite badly therefore i always use my rear brake.

 

And, i think the problem is with the front disk plate. I think it is bend alrd.

 

And i dono if the problem lies anywhere else?? E.g the front rims

 

Can u guys give me ur views

 

Thanks in advance

[-Imran-]

i thinking of changing my x1r limited edi to spark limited edi..anyone want exchange..

[dhobygod]

why wanna change sia ur bike so nice or u feel spark nicer haha

[limbat]

HS-H6M Halogen 12v 30/30watt now available in Crystal White color.

 

http://www.singaporebikes.com/forums/showthread.php?p=3401113#post3401113

[-Imran-]

why wanna change sia ur bike so nice or u feel spark nicer haha

 

spark handling higher..