[Group] Singapore BAJAJ Team (SBT)

[Fredd]

e onli computer game i play is football manager..starcraft also quite heavy alrdy if go for massive attack..hahaha..now if stressed play l4d2 on xbox whack zombie wif fryin pan..hahahaha

 

i would prefer metal heads. gd morning. i called u yesterday regarding Call of Duty blac ops. yes, im late in playing d game cos was bisi. btw, wats ur PC specs? d game lags big time wen i played, which is too damrn freaking annoying. saw d min specs on d web, its gota use a AMD Phenom X3 processor. while im using AMD athlon dual core X2. when i made comparison benchmark, my processor was 20% lower than the phenom's. shi-t, dats d reason 4 d heavy lag. and i just bought my rig a year plus ago. felt like snapping the dics into 2 after i uninstalled it. but didnt.

 

might be my last straw in my 13 years of PC gaming life. now need to move slowly to consoles 100%. screw PC gaming and other game crashes, updates, fixes, bugs, etc. screw them to he-ll.

[revhappy]

Brandon, 2ml i might not be able to make it

my bike is having that time of the month(AGAIN)

this time round its leaking from a small bolt under the engine left side near the side stand

bringing my bike down to UM 2ml

HAIZ...

not sure where leaking now...

 

That small bolt is the bolt near the gear shifter right? If yes, it is the front sprocket cover. Maybe again the oil seal gave away.

 

Signs for you to change bike

[alvinyansg]

That small bolt is the bolt near the gear shifter right? If yes, it is the front sprocket cover. Maybe again the oil seal gave away.

 

Signs for you to change bike

 

haha...

not sure if its the same seal

haiz..

later will check it out again after

[Brandonwang]

@Alvin so later cfm cancel ah???

[fircyber]

i would prefer metal heads. gd morning. i called u yesterday regarding Call of Duty blac ops. yes, im late in playing d game cos was bisi. btw, wats ur PC specs? d game lags big time wen i played, which is too damrn freaking annoying. saw d min specs on d web, its gota use a AMD Phenom X3 processor. while im using AMD athlon dual core X2. when i made comparison benchmark, my processor was 20% lower than the phenom's. shi-t, dats d reason 4 d heavy lag. and i just bought my rig a year plus ago. felt like snapping the dics into 2 after i uninstalled it. but didnt.

 

might be my last straw in my 13 years of PC gaming life. now need to move slowly to consoles 100%. screw PC gaming and other game crashes, updates, fixes, bugs, etc. screw them to he-ll.

 

My game play doesn't lag coz I juz change to a better grafic card. Only my loading was a bit slow. N my pc oso juz bought for a year old self built rig. But now all my specs are considered obselete. Now it became only admin pc. No gaming pc.

[Brandonwang]

:):):):):)

[avilu]

Anyone know the part number for 180UG3 & P200 diaphragm ?

 

Want to pass it to my Indian buddy so that he can get those in India..cheap cheap

This time round just ask to bring diaphragm only

....

ASAP..

 

Part number is : DH121048

[SC Gaban]

:):):):):)

 

wat smile2? kena yesterdays big sweep ah?:cool:

[Brandonwang]

wat smile2? kena yesterdays big sweep ah?:cool:

 

Smiling to dearest gaban :):):)

[robbedzombie]

its raining, its pouring, the old man is drinking teh tarik...

[YenYu]

its raining, its pouring, the old man is drinking teh tarik...

 

At west side? haha.. ride safe. Anyone know if carlton hotel parking is free? If got big side pannier can go pass the side? Hmm..

[avilu]

At west side? haha.. ride safe. Anyone know if carlton hotel parking is free? If got big side pannier can go pass the side? Hmm..

 

Yes, parking at Carlton hotel is free.. (in basement 2)

[YenYu]

Yes, parking at Carlton hotel is free.. (in basement 2)

 

But with my v35 can squeeze through or not? u tried parking there before?

[revhappy]

But with my v35 can squeeze through or not? u tried parking there before?

 

I guess shouldn't be a problem, cuz the barrier is higher than the boxes height. Most barriers are of same height so you can test at some other barrier.

 

But if the barrier is same height as your boxes then no chance, it will hit your boxes

[robbedzombie]

SERVICE & SPARE PARTS AT UM

 

Servicing

1) Standard Package Servicing ......................................$6.00

 

Engine & Spark Plug

02) Rectified oil leaking on top of engine :

-1pc cap camshaft + 2 pcs 'O' ring: .................... $35.00

-ball bearing (6301) @ $7.50 x 2 pcs ... $15

- ball bearing rear hub x 1 pc .... $8.50

- ball bearing (6302)........ $8.50

- ball bearing (6202) .... $8.00

03) 1pc diaphragm: .................................................. ....$25+5 for workmanship fees

04) 1pc Magneto gasket (for starter motor) : ....................$6.00

05) Wash + clean carburettor : .......................................$18.00

06) Engine holding bolt (long) ........................................... $8

07) Change Engine oil 1L ........................................$10.00

08) Change FS Mobil 1 Engine oil 1.2L(P200) ........................................$26.40

09) Change FS Mobil 1 Engine oil 1L(P180) .........................................$22.00

10) Denso spark plug (copper) .................................................. ....$6.50

11) NGK spark plug (copper) ..............................................$5.5 0

12) Respray engine block ..............................................$15

13) mj 115 ........................ $7.50

 

 

Brake, Clutch, Choke & Throttle

01) 1pc Rear Brake Shoe: .............................................. $18

02) 5pcs clutch spring (for starter motor): ........................$2.50

03) 5pcs bush for clutch (for starter motor): .....................$2.50

04) Clutch cable .................................................. ..........$16.50

05) Brake pedal .................................................. .............. $25

06) Brake Fluid + labour .................................... $12

07) Throttle cable ..............................$17

08) New set of choke……………………………………… ……….. $18

09) Clutch gasket .................. .................. 1pc $4 (need 2 pcs)

10) Centrifugal gasket ................................ $1 a pc

11) Cultch plate Kit set .................... $78 ( if I'm not wrong)

12) clutch lever...................$12

13) Clutch plate ....................... $19.50

14) Front brake pad ................. $23 a pair

15) master cylinder diaphrgm .............. $6

16) Pump kit master cylinder + top brake fluid + labor .... $45

 

 

Wheels, Tyres, Chain and Sprockets

01) Rubber cap for chain case: .......................................$1.00

02) Front & Rear sprocket + Chain : ................................. $75

03) Front sprocket only (without labor) .............................$12.50

04) Rear sprocket only (without labor) ..............................$25

05) Sprockets & Chain P200 (1 set) ........................ $136

06) IRC rear tyre (P200) .................................................$ 75

07) Battlax rear & front tyre P200 .............................$210

08) Seal puntured tyre ..................... $5

[09) Rubber Coupling Damper ............ $10.50

10) Duro Tyre Rear (P180) ...........................$65

11) Spray both rims (paint excluded) .................... $80 [1 spray can = $5, need 1 can per rim]

 

Electricals, Signals, Sensors and Horn

01) Signal light lens .................................................. .....$4.00

02) Whole signal light assembly (1 piece)............................$20.00

03) Bulb for fuel gauge/speedometer/tachometer (for ver 2) ..$2.00

04) Service starter motor assembly: ................................$15.00

05) Horn per pc .................................................. ................. $25

06) Head Light bulb ............................$8.50 [lookalike white light/P200] $7 [lookalike yellow]

07) Number Plate bulb ........................................ $2

08) Battery Dry Cell ...................$40.50

09) Temperature sensor .............. $12

10) starter motor........$60(second hand)$145(brand new)+labour fee $25

11) pigtail switch ..... $5

12) CDI assembly ..... $98

13) rotor assembly ... $125

14) stator assbly comp ... $90

15) control switch RH ..... $65

16) switch electrical control unit .... $124

17) coil with labor and gasket ... $129

 

Accessories

01) Crash bar .................................................. .............$30.00

02) Kit Grommet sidecover......................................... .......$2.50

03) Latest Givi Monorack for top box ..................................$70 (+$10 labor)

04) RH footrest.......................................... ...................... $36

05) LH footrest .................................................. .............. $32

06) Mirror per pcs .................................................. ............ $20

07) Handle bar .................................................. ................... $36

08) Pillon footrest per set .................................................. ..... $13

09) Shield muffler .................................................. ............... $28

10) Weld metal pc on side stand ............................................... $15

11) Spray foot step panel and pillion grab holders (paint excluded)..$20

12) Install aftermarket front & rear fenders ................................. $60

13) Blank key(without key cutting) ...................................$3.00

14) Footrest bracket................................$3

 

 

Fork, Main Stand, Side Stand and Exhaust

01) SVC the fork.............................................. ................ $40

02) Weld exhaust Pipe P180: .................................................. $15.00 [Depends on how bad it is]

03) Weld exhaust pipe P200 ......................................$22 [Depends on how bad it is]

04) Exhaust gasket ........................... $3.50

05) Top up fork oil ...................$4

06) Weld main stand wif extension + barckets ............. $30

07) Steering cone set($33) + Ball bearing 1 set of 39pcs (Top 19pcs below 20pcs)($4) + Labour($25)............................$62

08) Respray Exhaust ........................................$30

[Fredd]

But with my v35 can squeeze through or not? u tried parking there before?

 

If reali cnnt fit..worse comes to worse alight n take out ur boxes 1st.,after enter put back again..hahaha

[YenYu]

If reali cnnt fit..worse comes to worse alight n take out ur boxes 1st.,after enter put back again..hahaha

 

Wah power... later ppl at the back horn mi

[Fredd]

Wah power... later ppl at the back horn mi

 

Throw ur box at their car..hahaha

[YenYu]

Throw ur box at their car..hahaha

 

Then u pay mi 640$ okie? haha ^^. THen i dont pass u the box

Later they bang mi..

[mfk74]

Part number is : DH121048

 

@avilu....this part number for both model (P180 UG3 & P200)?

[avilu]

@avilu....this part number for both model (P180 UG3 & P200)?

 

Should be. Revhappy said UG3 and P200 uses same. Last time I got it for my UG3.

[arthur_chan]

When is the last time anyone hit over a thousand km in a single full tank?

 

Just use your odometer, and subtract end reading from start.

 

humm, i know someone who hit 1k km on his tripo...

[mfk74]

Should be. Revhappy said UG3 and P200 uses same. Last time I got it for my UG3.

 

ok noted...thks bro.

 

my colleague is going back for holiday...gonna ask him to get the diaphragm

[alvinyansg]

SERVICE & SPARE PARTS AT UM

 

Servicing

1) Standard Package Servicing ......................................$6.00

Engine & Spark Plug

02) Rectified oil leaking on top of engine :

-1pc cap camshaft + 2 pcs 'O' ring: .................... $35.00

-ball bearing (6301) @ $7.50 x 2 pcs ... $15

- ball bearing rear hub x 1 pc .... $8.50

- ball bearing (6302)........ $8.50

- ball bearing (6202) .... $8.00

03) 1pc diaphragm: .................................................. ....$25+5 for workmanship fees

04) 1pc Magneto gasket (for starter motor) : ....................$6.00

05) Wash + clean carburettor : .......................................$18.00

06) Engine holding bolt (long) ........................................... $8

07) Change Engine oil 1L ........................................$10.00

08) Change FS Mobil 1 Engine oil 1.2L(P200) ........................................$26.40

09) Change FS Mobil 1 Engine oil 1L(P180) .........................................$22.00

10) Denso spark plug (copper) .................................................. ....$6.50

11) NGK spark plug (copper) ..............................................$5.5 0

12) Respray engine block ..............................................$15

13) mj 115 ........................ $7.50

 

Brake, Clutch, Choke & Throttle

01) 1pc Rear Brake Shoe: .............................................. $18 ($10 Labour if bring your own brake shoe)

02) 5pcs clutch spring (for starter motor): ........................$2.50

03) 5pcs bush for clutch (for starter motor): .....................$2.50

04) Clutch cable .................................................. ..........$16.50

05) Brake pedal .................................................. .............. $25

06) Brake Fluid + labour .................................... $12

07) Throttle cable ..............................$17

08) New set of choke……………………………………… ……….. $18

09) Clutch gasket .................. .................. 1pc $4 (need 2 pcs)

10) Centrifugal gasket ................................ $1 a pc

11) Cultch plate Kit set .................... $78 ( if I'm not wrong)

12) clutch lever...................$12

13) Clutch plate ....................... $19.50

14) Front brake pad ................. $23 a pair

15) master cylinder diaphrgm .............. $6

16) Pump kit master cylinder + top brake fluid + labor .... $45

 

 

Wheels, Tyres, Chain and Sprockets

01) Rubber cap for chain case: .......................................$1.00

02) Front & Rear sprocket + Chain : ................................. $75

03) Front sprocket only (without labor) .............................$12.50

04) Rear sprocket only (without labor) ..............................$25

05) Sprockets & Chain P200 (1 set) ........................ $136

06) IRC rear tyre (P200) .................................................$ 75

07) Battlax rear & front tyre P200 .............................$210

08) Seal puntured tyre ..................... $5

[09) Rubber Coupling Damper ............ $10.50

10) Duro Tyre Rear (P180) ...........................$65

11) Spray both rims (paint excluded) .................... $80 [1 spray can = $5, need 1 can per rim]

 

Electricals, Signals, Sensors and Horn

01) Signal light lens .................................................. .....$4.00

02) Whole signal light assembly (1 piece)............................$20.00

03) Bulb for fuel gauge/speedometer/tachometer (for ver 2) ..$2.00

04) Service starter motor assembly: ................................$15.00

05) Horn per pc .................................................. ................. $25

06) Head Light bulb ............................$8.50 [lookalike white light/P200] $7 [lookalike yellow]

07) Number Plate bulb ........................................ $2

08) Battery Dry Cell ...................$40.50

09) Temperature sensor .............. $12

10) starter motor........$60(second hand)$145(brand new)+labour fee $25

11) pigtail switch ..... $5

12) CDI assembly ..... $98

13) rotor assembly ... $125

14) stator assbly comp ... $90

15) control switch RH ..... $65

16) switch electrical control unit .... $124

17) coil with labor and gasket ... $129

 

Accessories

01) Crash bar .................................................. .............$30.00

02) Kit Grommet sidecover......................................... .......$2.50

03) Latest Givi Monorack for top box ..................................$70 (+$10 labor)

04) RH footrest.......................................... ...................... $36

05) LH footrest .................................................. .............. $32

06) Mirror per pcs .................................................. ............ $20

07) Handle bar .................................................. ................... $36

08) Pillon footrest per set .................................................. ..... $13

09) Shield muffler .................................................. ............... $28

10) Weld metal pc on side stand ............................................... $15

11) Spray foot step panel and pillion grab holders (paint excluded)..$20

12) Install aftermarket front & rear fenders ................................. $60

13) Blank key(without key cutting) ...................................$3.00

14) Footrest bracket................................$3

 

 

Fork, Main Stand, Side Stand and Exhaust

01) SVC the fork.............................................. ................ $40

02) Weld exhaust Pipe P180: .................................................. $15.00 [Depends on how bad it is]

03) Weld exhaust pipe P200 ......................................$22 [Depends on how bad it is]

04) Exhaust gasket ........................... $3.50

05) Top up fork oil ...................$4

06) Weld main stand wif extension + barckets ............. $30

07) Steering cone set($33) + Ball bearing 1 set of 39pcs (Top 19pcs below 20pcs)($4) + Labour($25)............................$62

08) Respray Exhaust ........................................$30

[revhappy]

Should be. Revhappy said UG3 and P200 uses same. Last time I got it for my UG3.

 

Alamak! No bro, I never said UG3 and P200 are same.