[Group] Singapore BAJAJ Team (SBT)

[Fredd]

hi guys..how was btwo? been bz wif work..take care..ride safe..rainin soon..

[robbedzombie]

+1 hehehehe

[speedaddict]

+2 heheheh

[fizhlmocca]

Change my coils this morning after my night shift... The power shiok but the vibration not shiok oh well, if u want power u have to sacrifice something mah... Hehe

[alvinyansg]

Change my coils this morning after my night shift... The power shiok but the vibration not shiok oh well, if u want power u have to sacrifice something mah... Hehe

 

on sinnob?

[fizhlmocca]

on sinnob?

 

Nope stock.... I've odered sinnob and xado products from Mj already

[alvinyansg]

Nope stock.... I've odered sinnob and xado products from Mj already

 

ic...

once on sinnob you will feel the difference in vibration...

another cheaper option is dropping the sproc sizes for your stock sproc

to reduce stress on engine at higher speeds

[alvinyansg]

Project K.O.M.A Ver 2.0

new set up

need to do something to dampen the vibration

 

[mjbs64]

MO Xado Products for May/June 2011 .....

 

 

(You can also check Page 450 of this thread for detailed info on the Xado/Tora products)

 

Name : Items : Qty

 

1: O'Ren : Xado mini turbo lube eo conditioner x3 / Xado Revitalizant x2 / Tora Tora (daily) x1 /Tora Tora Meslo x2 / Rubber Damper for rear brake: 1 set

 

2: mfk74 : Xado Revitalizants x1 / Tora Tora (daily) x1 /Tora Tora Meslo x2 /

 

3: Fiddy : Tora Tora (daily HP) x1 / Tora Tora Meslo x 1

 

4: Fizhlmocca : Xado Revitalizant x 1/Xado mini turbo lube eo conditioner x 1/Tora Tora (daily) x1, p200 sinnob gold (ride with prosperity) x 1, rubber damper coupling x 1

 

5: Ah-pet : Xado Revitalizant x 1

 

6: Pandancake: Xado Revitalizants x1 / Tora Tora (daily) x1 /Tora Tora Meslo x1

 

7. irahc78 : xado revitalizant x 1 , anti carbon x 4

 

8: husher : chain stabiliser x 1

 

 

Pls update if you still keen to continue or cancel your items ...

[alvinyansg]

MO Xado Products for May/June 2011 .....

 

 

(You can also check Page 450 of this thread for detailed info on the Xado/Tora products)

 

Name : Items : Qty

 

1: O'Ren : Xado mini turbo lube eo conditioner x3 / Xado Revitalizant x2 / Tora Tora (daily) x1 /Tora Tora Meslo x2 / Rubber Damper for rear brake: 1 set

 

2: mfk74 : Xado Revitalizants x1 / Tora Tora (daily) x1 /Tora Tora Meslo x2 /

 

3: Fiddy : Tora Tora (daily HP) x1 / Tora Tora Meslo x 1

 

4: Fizhlmocca : Xado Revitalizant x 1/Xado mini turbo lube eo conditioner x 1/Tora Tora (daily) x1, p200 sinnob gold (ride with prosperity) x 1, rubber damper coupling x 1

 

5: Ah-pet : Xado Revitalizant x 1

 

6: Pandancake: Xado Revitalizants x1 / Tora Tora (daily) x1 /Tora Tora Meslo x1

 

7. irahc78 : xado revitalizant x 1 , anti carbon x 4

 

8: husher : chain stabiliser x 1

 

9: Alvin : Xado Revitalizant x 1

 

Pls update if you still keen to continue or cancel your items ...

[mfk74]

ic...

once on sinnob you will feel the difference in vibration...

another cheaper option is dropping the sproc sizes for your stock sproc

to reduce stress on engine at higher speeds

 

My RPM goes higher after replacing to protec coils...

@90km/h rpm 8K...

previously was @ 6.5-7k.....wondering why??

[SC Gaban]

+2 heheheh

 

+2-1x3/4-1/2 = mc2/gravity-newtowns law of motion = almost empty tank + nun cheese = makan n petrol pump in jb.

[m0bIlEnErD]

Good morning everyone.

 

Ride safe today.

[alvinyansg]

My RPM goes higher after replacing to protec coils...

@90km/h rpm 8K...

previously was @ 6.5-7k.....wondering why??

 

 

hmm...

try tuning your afr....

any stuck or super high rpm?

[mfk74]

hmm...

try tuning your afr....

any stuck or super high rpm?

 

not yet tune....

no stuck or super high rpm...

will change spark plug helps??

currently using the copper type...i have the platinum one..

[ORen]

Hi,

 

Alvin & MJ I know you have installed a DIY Oiler and I think I will make one as well before my trip.

 

I looked up past threads, and found very useful info Alvin posted here and MJ here and here on where to get the necessary accessories. More photos here.

 

I have a few questions:

 

1. If you use a brake fluid reservoir, how often do you fill it up ? Is it possible to fill it without a funnel ?

2. What kind of oil do you use, is it gear oil ? If you tried several types of oil, can you recommend one ? EDIT: Noticed Alvin you say you use ScottOiler oil, I assume from Motoworld ? How much is it ?

3. Does it splatter much on the rim or elsewhere ?

4. In the DIY list of things, there's silicone sealant. Can I use the one for bathrooms, the white one ? If not, where to get the right one ?

5. Where beside Ah Boy is the "valve shop" : I know MJ is going to laugh at me again, but .. I know left side of Ah Boy there's the key shop, right beside it. Is the valve shop on the left further down or on the right, nearer to Kelatan Lane ?

6. I nooticed MJ you have a tube inside a tube : a transparent one inside a yellow one, why is that (see photos link above) ?

7. What do you guys put at the end of the tube to act as a pointy end that will drip the oil ?

8. How do you make sure the dripping is at the right frequency ? Is using a 4mm tube + the valve enough to ensure the frequency is right ? How many drops/min roughly do you have ?

Edited June 3, 2011 by O'Ren

[YenYu]

Hi,

 

Alvin & MJ I know you have installed a DIY Oiler and I think I will make one as well before my trip.

 

I looked up past threads, and found very useful info Alvin posted here and MJ here and here on where to get the necessary accessories. More photos here.

 

I have a few questions:

 

1. If you use a brake fluid reservoir, how often do you fill it up ? Is it possible to fill it without a funnel ?

2. What kind of oil do you use, is it gear oil ? If you tried several types of oil, can you recommend one ? EDIT: Noticed Alvin you say you use ScottOiler oil, I assume from Motoworld ? How much is it ?

3. Does it splatter much on the rim or elsewhere ?

4. In the DIY list of things, there's silicone sealant. Can I use the one for bathrooms, the white one ? If not, where to get the right one ?

5. Where beside Ah Boy is the "valve shop" : I know MJ is going to laugh at me again, but .. I know left side of Ah Boy there's the key shop, right beside it. Is the valve shop on the left further down or on the right, nearer to Kelatan Lane ?

6. I nooticed MJ you have a tube inside a tube : a transparent one inside a yellow one, why is that (see photos link above) ?

7. What do you guys put at the end of the tube to act as a pointy end that will drip the oil ?

8. How do you make sure the dripping is at the right frequency ? Is using a 4mm tube + the valve enough to ensure the frequency is right ? How many drops/min roughly do you have ?

 

Hey O'ren, you can give a try on ezzyoiler which can be found at the MO section, uncle is veri friendly and he explains on how it works... pretty great stuff after using for quite awhile. There are 2 or 3 prices, i took up the $45 for twin tips, and upgraded to the $65 for the deluxe twin tip, it's pretty robust and cool. U might wanna consider it too.

[Lanzer]

Hi,

 

Alvin & MJ I know you have installed a DIY Oiler and I think I will make one as well before my trip.

 

I looked up past threads, and found very useful info Alvin posted here and MJ here and here on where to get the necessary accessories. More photos here.

 

I have a few questions:

 

1. If you use a brake fluid reservoir, how often do you fill it up ? Is it possible to fill it without a funnel ?

2. What kind of oil do you use, is it gear oil ? If you tried several types of oil, can you recommend one ? EDIT: Noticed Alvin you say you use ScottOiler oil, I assume from Motoworld ? How much is it ?

3. Does it splatter much on the rim or elsewhere ?

4. In the DIY list of things, there's silicone sealant. Can I use the one for bathrooms, the white one ? If not, where to get the right one ?

5. Where beside Ah Boy is the "valve shop" : I know MJ is going to laugh at me again, but .. I know left side of Ah Boy there's the key shop, right beside it. Is the valve shop on the left further down or on the right, nearer to Kelatan Lane ?

6. I nooticed MJ you have a tube inside a tube : a transparent one inside a yellow one, why is that (see photos link above) ?

7. What do you guys put at the end of the tube to act as a pointy end that will drip the oil ?

8. How do you make sure the dripping is at the right frequency ? Is using a 4mm tube + the valve enough to ensure the frequency is right ? How many drops/min roughly do you have ?

If you intend to have it fast, try find contact ezzyoiler. Fast and easy installation.

[Fredd]

Yea!! Be e lazy ppl like us..juz pay n learn..hahah..im usin it at 200km/h wif ezzyoiler so it does work well..anyway for e tip of contact to e spocket u can use cable tie..juz need to fold it nicey

[Fredd]

@mjbs64 sori for late reply..here's e no 6754 6922

[vincentheng]

ic...

once on sinnob you will feel the difference in vibration...

another cheaper option is dropping the sproc sizes for your stock sproc

to reduce stress on engine at higher speeds

 

hi alvin, can drop the sprocket size?

 

i am riding ug2 sinnob is good but too ex for me.. UM got smaller sprocket?

[-Gu0Zz-]

hi alvin, can drop the sprocket size?

 

i am riding ug2 sinnob is good but too ex for me.. UM got smaller sprocket?

 

I went to hou heng at Ah gua lane in JB and it cost 90RM to fix a new pair of sprockets.. not bad if you're on a budget. i dropped to 15 36.. but maybe u can op for 15 38.

 

Hi,

 

Alvin & MJ I know you have installed a DIY Oiler and I think I will make one as well before my trip.

 

I looked up past threads, and found very useful info Alvin posted here and MJ here and here on where to get the necessary accessories. More photos here.

 

I have a few questions:

 

1. If you use a brake fluid reservoir, how often do you fill it up ? Is it possible to fill it without a funnel ?

2. What kind of oil do you use, is it gear oil ? If you tried several types of oil, can you recommend one ? EDIT: Noticed Alvin you say you use ScottOiler oil, I assume from Motoworld ? How much is it ?

3. Does it splatter much on the rim or elsewhere ?

4. In the DIY list of things, there's silicone sealant. Can I use the one for bathrooms, the white one ? If not, where to get the right one ?

5. Where beside Ah Boy is the "valve shop" : I know MJ is going to laugh at me again, but .. I know left side of Ah Boy there's the key shop, right beside it. Is the valve shop on the left further down or on the right, nearer to Kelatan Lane ?

6. I nooticed MJ you have a tube inside a tube : a transparent one inside a yellow one, why is that (see photos link above) ?

7. What do you guys put at the end of the tube to act as a pointy end that will drip the oil ?

8. How do you make sure the dripping is at the right frequency ? Is using a 4mm tube + the valve enough to ensure the frequency is right ? How many drops/min roughly do you have ?

 

I feel like diying that too! but i've just ordered a can of DuPont Teflon chain lube from ah_xian in the mass order section.

[alvinyansg]

Hey O'ren, you can give a try on ezzyoiler which can be found at the MO section, uncle is veri friendly and he explains on how it works... pretty great stuff after using for quite awhile. There are 2 or 3 prices, i took up the $45 for twin tips, and upgraded to the $65 for the deluxe twin tip, it's pretty robust and cool. U might wanna consider it too.

 

each have their preference mah...

some like to diy...

[ORen]

Yep, I want to do it myself, learn and see if it's sturdy and can last. If not I can always buy the ezzyoiler at the last minute...

 

So. Answers?

 

Just spent 3h washing, sponging, bathing, shining, waxing, de-rusting my bike

Washed the chain too, then WD40-ed it and put on the Maxima Chain Lube.

It comes in a small spray can too and sprays White foam that turns into liquid oil.

Hopefully it will work well so I can take the small sized can with me

 

Read good things about the dupont Teflon lube, how much is it?

[revhappy]

Just something to ponder about:

 

If the chain and sprocket cost like 90RM = 38$, even if you use cheap used EO to lube the chain every week, how long is it going last? My bet definitely more than 20,000 kms.

 

Using expensive chain lube how much longer will the chain last? Is it worth the total cost of the lube when you can get replace the whole chain and sprockets for so cheap?