[Q&A] SBF CB400 Official Q&A Thread 2009 (PLS ASK YOUR QUESTIONS HERE!)

[Ah Pek]

so how much is the YTZ 12S cost?wat do u mena by dont buy old stock one?u mena dont buy the YTZ 10s?

 

Old stock meaning siting on the shelf for a long time. As they are factory activated..meaning the electrolyte has already been filled, its a fully charge battery. If left too long, it dicharges and to charge it again, its may not work. 10S to 14S all same same...12S cost about $180 the most..still cheaper then to buy in USA at $179 USD...LOL!

[alexbong]

yup its 18L bro, 15/3 , mine is 14/4 lol

 

Original 18L tank. 4L is reserve. look for the manual i posted.

 

 

Yesterday i experienced this as i cruz ard 90km/h on the ew, suddenly felt my spec 3 like lost abit of power and slow down abit even i did not close/move my trottle. don know what is wrong?? anyone got same experience b4?? mind to share??

 

Any1 feedback??

[at0m87]

Original 18L tank. 4L is reserve. look for the manual i posted.

 

Manual for which bike and is it user or service manual?

[Infernalwar]

Manual for which bike and is it user or service manual?

 

User manual bro

[Iceachilles]

Hi guys and girls, any suggestions where to get the above mentioned device or diy? Want to keep track of my bike's temperature. Best can give me the price and address to get. THank you

[isymn]

Yesterday i experienced this as i cruz ard 90km/h on the ew, suddenly felt my spec 3 like lost abit of power and slow down abit even i did not close/move my trottle. don know what is wrong?? anyone got same experience b4?? mind to share??

 

Can open vtec? If not then must be the vtec sensor problem..last time i kena rpm can go up to 5.5 only...anw anione noes roughly how much to chge the fork seal?

[misterdeelin]

Has anyone here been to a shop called Wheel Motors? I was recommended that shop by my neighbor to get bikes from. According to him, its near ITE Simei, I assume its along Upper Changi Road? Just wondering if anyone has been to this shop before, if there is.

 

I'm thinking of going down to have a look at some bikes, Any personal feedbacks, can please PM me? (Should it be negative) Could y'all quote me and give a thumbs up if you would recommend the shop as well?

 

Wheel Motors (Bedok)

 

 

Thanks guys!

[Infernalwar]

Yo guys, just wanna ask for fun. Hehe... I wanna know if I were to do dynorun my bike, must I install dynojet? Or isit comes in a package? There's alot of them I'm not to sure which ones. Anyone here have done dynorun or jet kindly tell me more about this. I'm kinda interested in one. Hehe... Thx!

[kano]

Yo guys, just wanna ask for fun. Hehe... I wanna know if I were to do dynorun my bike, must I install dynojet? Or isit comes in a package? There's alot of them I'm not to sure which ones. Anyone here have done dynorun or jet kindly tell me more about this. I'm kinda interested in one. Hehe... Thx!

 

i think get FS first then do the dyno + jet kit $300

[Huatster888]

i need help ......my fuel gauge meter for my spec 2 is spoiling.....i think the seal 4 the meter gone liao...tats y water will seep in...n thus spoiling my lcd.....wher to get the new lcd and the meter seal??lastly wher can i buy the 1 piece rear hugger for super 4?

tank u can pm me plz?

[rockeuez]

Old stock meaning siting on the shelf for a long time. As they are factory activated..meaning the electrolyte has already been filled, its a fully charge battery. If left too long, it dicharges and to charge it again, its may not work. 10S to 14S all same same...12S cost about $180 the most..still cheaper then to buy in USA at $179 USD...LOL!

 

Ah pek, u meant YTZ is the brand ar?

 

btw u r a part time mech? alot of ppl ask u for advice,u must b a guru

[Infernalwar]

i think get FS first then do the dyno + jet kit $300

 

Ya I know. Getting my ss headers mid july. So meaning dyno + jet kit = $300. Then must still install the rectangular shaped dyno thingy?

[Infernalwar]

Ah pek, u meant YTZ is the brand ar?

 

btw u r a part time mech? alot of ppl ask u for advice,u must b a guru

 

YTZ 12S is a model bro. The brand is YUASA. I've just changed mine. HEhe...

[rockeuez]

YTZ 12S is a model bro. The brand is YUASA. I've just changed mine. HEhe...

 

power la bro, let us knw abt yr feedback regardin yr new battery

 

btw did it cost u $180? thats wat i read on forum...wher did u change it?

 

heard that it can last u at least 4 yrs..wow...superb cost saving!!!

[richard3121sg]

Hi, sorry all bros,...I just bought a stebel nautilus horn from Mustafa for my gilera St200. Does anyone knows where can I find a shop or someone who can help me install it? Prefer somewhere near sim lim tower that area. If convenient pls state the cost, thank you very much bros.

Edited June 27, 2010 by richard3121sg
Easier for ppl to readn advice

[Infernalwar]

power la bro, let us knw abt yr feedback regardin yr new battery

 

btw did it cost u $180? thats wat i read on forum...wher did u change it?

 

heard that it can last u at least 4 yrs..wow...superb cost saving!!!

 

Did it for $150 bro. Feedback? Just better voltage and signal/headlamps all brighter...

[Infernalwar]

Hi, sorry all bros,...I just bought a stebel nautilus horn from Mustafa for my gilera St200. Does anyone knows where can I find a shop or someone who can help me install it? Prefer somewhere near sim lim tower that area. If convenient pls state the cost, thank you very much bros.

 

Near simlim there got alot of bikeshops wat bro. Forget the name though...

[at0m87]

Hi, sorry all bros,...I just bought a stebel nautilus horn from Mustafa for my gilera St200. Does anyone knows where can I find a shop or someone who can help me install it? Prefer somewhere near sim lim tower that area. If convenient pls state the cost, thank you very much bros.

 

Why sorry? It is a very good horn. And loud horns are big. Have u decided where to mount it? I installed mine and they charged me $40 labour. I change eo at the same time too dunno the $40 include eo labour anot? Btw hw much u buy the horn? Its the same as my signature right?

[aeykel]

Hi guys..wana ask for revo behind the pillion seats there's a handle for pillion to grab on..i wana remove mine n cover thw gap/hole..qhere can i get thw cover..?thanks..

[at0m87]

what does it look like?

[Infernalwar]

Hi guys..wana ask for revo behind the pillion seats there's a handle for pillion to grab on..i wana remove mine n cover thw gap/hole..qhere can i get thw cover..?thanks..

 

You can get it from Rabbit. PM him...

[rockeuez]

Did it for $150 bro. Feedback? Just better voltage and signal/headlamps all brighter...

 

Bro..which shop did u do it at?

[IfahQueen]

Harlow peepZ,

 

Where Can i get a Good Deal for Yoshimura pipe?

[alexbong]

Can open vtec? If not then must be the vtec sensor problem..last time i kena rpm can go up to 5.5 only...anw anione noes roughly how much to chge the fork seal?

 

Yup, my VTEC still work ok. still keep monitoring it.

btw the front fork seal shld be ard $25 per pc.

[alexbong]

Where can i find the front crash bar that similar to those TP bike?? look like 2 points right? ard how much?

 

just like the look. hehehe, tot want to install 1 then install lots of fog lights on it too....hahahah