Aprilia Riders

[lacrimosae]

tknge / Take some time-off from baby to join in for a while.

 

Nge,

 

Can bring your drill so we can drill the hole in our fuel tank to fit our fuel level sensor for our KOSO meters?

[didooo]

Does the quotation include the valve CDI? It's a little black box smaller than our bike CDI.

 

 

 

Parts may be in before 26 Sep. If they are not by the 26 Sep, DIY will proceed but with only valve servicing and carb servicing on the itinerary.

 

BTW, it's probably safer you get proper sized tires if you want to go track. 120 front/ 150 rear might unsettle your bike in the turns. I still don't quite understand why you want a 120 front...

Do try to get a 110 instead, before the rear tire threads get too worn out. That way the front and rear will be balanced.

 

Hi lacrimosae, He said the box is only needed for 06&07, mine 08 model is the same as the 09model where the CDI is together with the valve CDI.

 

Does this make sense to you ?

 

Thank you. I will definitely join the DIY but i will only be able to confirm next week if i will be going overseas for work again.

 

Really appreciate you kind help all these while.

[lacrimosae]

Hi lacrimosae, He said the box is only needed for 06&07, mine 08 model is the same as the 09model where the CDI is together with the valve CDI.

 

Does this make sense to you ?

 

Thank you. I will definitely join the DIY but i will only be able to confirm next week if i will be going overseas for work again.

 

Really appreciate you kind help all these while.

 

Oh yeah!.... Roight roight!! My mistake.... I forgot about that little discrepancy with the 08 models.

 

Yes, you won't be needing the RAVE ECU, just what is mentioned - Valve, valve motor (solenoid), valve cable, and valve housing (includes internal seal, spring, o-ring, valve housing gasket, and 2 hex screw bolts).

 

Hope to see you for DIY! Even if you're not doing anything, there's PLENTY OF FREE ALCOHOL! woo hoo!

[lacrimosae]

Btw, does anyone wanna come over for a short DIY session tonight?

 

Starts at 7pm, ends at 11pm.

 

Block 2A Multistorey Carpark Joo Seng Road Singapore 361002

Edited September 26, 2009 by lacrimosae

[insaint]

]OPERATION DIY 101

The Major DIY Session not to be missed!

 

Date: 27 September Sunday

Time: 1000-1600hrs

Venue: Block 21 Joo Seng Road Singapore 360021

 

Curriculum to be covered:

- Carburetor servicing

- Exhaust valve servicing

- Replacement of VHSB carburetor gaskets

- Replacement of ignition cover

- Replacement of reed valves

- Replacement of fuel hoses

- Replacement of front and rear mudguards

- Replacement of chain guard

- Replacement of heel plates

- Replacement of brake springs

- Replacement of brake pads

- Installation of throttle cable elbow

- Installation of fuel filters

- Installation of fuel connectors

- Installation of oil supply hoses

- Installation of oil tank filter kit

- Installation of swivel gear lever

 

As this is a major DIY session, I do expect everyone to bring their own rags, solvents, steel brushes and tools. Also note that as it is a DIY session, I will advise you on your workmanship, but I will refrain from assisting you to avoid liabilities. If you make me work on your bike, I will charge you labour fees.

 

If you wish to be provided equipment (so that you don't have to pack them over), please feel free to make a S$35 donation which will ensure you have rags, cleaning solvents ($12), brushes ($8) and necessary tools (allen key set $12).

If you bring your own equipment, DIY is free!

 

Please confirm attendance below, followed by 'YES' if you want to be provided with cleaning equipment (rags, solvents, brushes, tools) so that I can go purchase extra kits (you get to keep your own equipment after the session):

 

1. lacrimosae/YES

2. Joy

3. Sub Zero

4. tknge / Take some time-off from baby to join in for a while.

5. Patrick>> (adv booking for this diy>will bring some tool to help out>>plus need TK help haha to fix the rpm>> haha

6.

[insaint]

Does the quotation include the valve CDI? It's a little black box smaller than our bike CDI.

 

 

 

Parts may be in before 26 Sep. If they are not by the 26 Sep, DIY will proceed but with only valve servicing and carb servicing on the itinerary.

 

BTW, it's probably safer you get proper sized tires if you want to go track. 120 front/ 150 rear might unsettle your bike in the turns. I still don't quite understand why you want a 120 front...

Do try to get a 110 instead, before the rear tire threads get too worn out. That way the front and rear will be balanced.

 

Law our parts too?? haha

[whoissham]

wow...i miss sooooo much....

[tomdick12]

hi guys,

 

I have just bought a 04 model. Do you mind if I come and see and say hi? Would love to know you guy more.

 

]OPERATION DIY 101

The Major DIY Session not to be missed!

 

Date: 27 September Sunday

Time: 1000-1600hrs

Venue: Block 21 Joo Seng Road Singapore 360021

 

Curriculum to be covered:

- Carburetor servicing

- Exhaust valve servicing

- Replacement of VHSB carburetor gaskets

- Replacement of ignition cover

- Replacement of reed valves

- Replacement of fuel hoses

- Replacement of front and rear mudguards

- Replacement of chain guard

- Replacement of heel plates

- Replacement of brake springs

- Replacement of brake pads

- Installation of throttle cable elbow

- Installation of fuel filters

- Installation of fuel connectors

- Installation of oil supply hoses

- Installation of oil tank filter kit

- Installation of swivel gear lever

 

As this is a major DIY session, I do expect everyone to bring their own rags, solvents, steel brushes and tools. Also note that as it is a DIY session, I will advise you on your workmanship, but I will refrain from assisting you to avoid liabilities. If you make me work on your bike, I will charge you labour fees.

 

If you wish to be provided equipment (so that you don't have to pack them over), please feel free to make a S$35 donation which will ensure you have rags, cleaning solvents ($12), brushes ($8) and necessary tools (allen key set $12).

If you bring your own equipment, DIY is free!

 

Please confirm attendance below, followed by 'YES' if you want to be provided with cleaning equipment (rags, solvents, brushes, tools) so that I can go purchase extra kits (you get to keep your own equipment after the session):

 

1. lacrimosae/YES

2. Joy

3. Sub Zero

4. tknge / Take some time-off from baby to join in for a while.

5. Patrick>> (adv booking for this diy>will bring some tool to help out>>plus need TK help haha to fix the rpm>> haha

6.

[insaint]

HellOoO everyone>> Late News..

 

Have a long day diy on sunday... jiro who join me in the afternoon for fixing his lever..

 

got some photo to let you all see>> Dont get bored for that hahaha

[insaint]

A lazy day to start DIY>>> A small project to cut down the vibration on the on the front cowl bracket

 

Idea from our edwin n aaron.

 

http://img402.imageshack.us/img402/1272/dsc00296p.jpg

 

http://img180.imageshack.us/img180/3367/dsc00298q.jpg

 

http://img33.imageshack.us/img33/5329/dsc00300c.jpg

 

diy 4 rubber washers thinking how to fix into bracket.

 

http://img440.imageshack.us/img440/6928/dsc00301p.jpg

 

trying to squeeze in the rubber but no luck. FAIL

 

http://img180.imageshack.us/img180/6100/dsc00303t.jpg

 

think for awhile trying to fix it>> make out 4 ring rubber to fit in n try again

 

http://img180.imageshack.us/img180/2797/dsc00304.jpg

 

http://img33.imageshack.us/img33/2364/dsc00305e.jpg

 

slot in just nice >> BUT cant take in all the rubber ring> Lastly on 2 ring (top right 1 ring, below left 1 ring)

 

http://img246.imageshack.us/img246/8808/dsc00309q.jpg

 

Thankks for looking hahaha

Edited September 8, 2009 by insaint

[lacrimosae]

Order for the following has been placed and confirmed:

 

- speedo gear (£38.80/ S$90.70) excluding shipping

 

Sub Zero & Codockz,

 

Please make payment before 26 September. You can pay for the shipping upon collection of your items.

 

Thanks!

Edited September 8, 2009 by lacrimosae

[tknge]

Nge,

 

Can bring your drill so we can drill the hole in our fuel tank to fit our fuel level sensor for our KOSO meters?

 

OK, will do.

[tknge]

][5. Patrick>> (adv booking for this diy>will bring some tool to help out>>plus need TK help haha to fix the rpm>> haha

6.

 

Sure, no problem bro. Hope it work out well.

[tknge]

hi guys,

 

I have just bought a 04 model. Do you mind if I come and see and say hi? Would love to know you guy more.

 

U are welcome.

[Sub Zero]

Order for the following has been placed and confirmed:

 

- speedo gear (£38.80/ S$90.70) excluding shipping

 

Sub Zero & Codockz,

 

Please make payment before 26 September. You can pay for the shipping upon collection of your items.

 

Thanks!

 

Thanks Lawrence!

[250806]

brosssssssssssssssssssssssss. haha. new aprilia rider here. need help, wat shop is too to repair my bike and to ZENG the bike ? =) my bike 1st gear , the valve cannot open, so i wan go tune tune my bike. and thinking of changin pipe and carb. thanks in advance ! =) if can PM me for the shopsssssss tat are strongly recommanded, i will be very greatful !thanks thanks ! =)

[lacrimosae]

Thanks Lawrence!

 

Don't thank me, thank your crooked front cowl bracket!

 

I finished at 3am last night and was so frustrated that the bracket was even more bent than my current one, that when I got home, I marched up to my room, fired my pc up, and ordered the bracket from Ultimate Parts. I hadn't even had time to wash my hands nor take a bath.

 

I'm hoping all the parts arrive before 25 Sept so that the 27 Sept DIY-101 can proceed as planned.

 

I have my work cut out for me, now that I have to include the change of bracket and KOSO meter.

 

Looks like it might be a 24-hr DIY session after all.

[lacrimosae]

OPERATION DIY 101

The Major DIY Session not to be missed!

 

Register soon! Only 10 vacancies available!

 

Date: 27 September Sunday

Time: 0900-2300hrs

Venue: Block 2A Multistorey Carpark Joo Seng Road Singapore 361002

 

Curriculum to be covered:

- Carburetor servicing

- Exhaust valve servicing

- Installation of KOSO Meter

- Installation of license plate bracket

- Replacement of front cowl bracket

- Replacement of carburetor flange

- Replacement of carburetor intake manifold

- Replacement of VHSB carburetor gaskets

- Replacement of ignition cover

- Replacement of reed valves

- Replacement of fuel hoses

- Replacement of front and rear mudguards

- Replacement of chain guard

- Replacement of heel plates

- Replacement of brake springs

- Replacement of brake pads

- Installation of throttle cable elbow

- Installation of fuel filters

- Installation of fuel connectors

- Installation of oil supply hoses

- Installation of oil tank filter kit

- Installation of swivel gear lever

 

As this is a major DIY session, I do expect everyone to bring their own rags, solvents, steel brushes and tools. Also note that as it is a DIY session, I will advise you on your workmanship, but I will refrain from assisting you to avoid liabilities. If you make me work on your bike, I will charge you labour fees.

 

If you wish to be provided equipment (so that you don't have to pack them over), please feel free to make a S$35 donation which will ensure you have rags, cleaning solvents, brushes and necessary tools.

If you bring your own equipment, DIY is free!

 

Please confirm attendance below, followed by 'YES' if you want to be provided with cleaning equipment (rags, solvents, brushes, tools) so that I can go purchase extra kits (you get to keep your own equipment after the session):

 

1. lacrimosae/YES

2. Joy

3. Sub Zero

4. tknge

5. Patrick

6.

7.

8.

9.

10.

Edited September 26, 2009 by lacrimosae

[tknge]

brosssssssssssssssssssssssss. haha. new aprilia rider here. need help, wat shop is too to repair my bike and to ZENG the bike ? =) my bike 1st gear , the valve cannot open, so i wan go tune tune my bike. and thinking of changin pipe and carb. thanks in advance ! =) if can PM me for the shopsssssss tat are strongly recommanded, i will be very greatful !thanks thanks ! =)

 

Most frequent workshop aprilian went are Mah, Ideal, FM, HKL.....up to individual preference.....

If valve not opening, any gears also will not open........

Change pipe? Want good non-street legal? Buy from me.

[quikslvr]

MOVIE OUTING!

 

http://nparks.eventshub.sg/cmn_wb_ReadFile.aspx?tableName=EMS_EventDetail&keyName=EventID&keyId=114413&fieldName=EventImage

 

http://nparks.eventshub.sg/ems_wb_Details.aspx?CalID=5&EventID=114413

 

 

WHAT: Class 95FM Movie in the park!

WHEN: 12 Sept 09

WHERE: Fort Canning Park

TIME: Movie starts @ 1800

MEETUP Place: Fort Canning Park carpark @ 1700.Go there early,get a good place in the middle,bring some tidbits and those have canvas can use it as groundsheet.

 

Cmon guys lets have an outing and watch the movies and catch babe-licious Megan Fox riding RS125 in TF2!

 

Going:

 

1: quik 93578007

2:

3:

4:

 

Now where are those peeps who have been crying out for meetups?? Already got outing dont want to join

[Sub Zero]

Don't thank me, thank your crooked front cowl bracket!

 

I finished at 3am last night and was so frustrated that the bracket was even more bent than my current one, that when I got home, I marched up to my room, fired my pc up, and ordered the bracket from Ultimate Parts. I hadn't even had time to wash my hands nor take a bath.

 

I'm hoping all the parts arrive before 25 Sept so that the 27 Sept DIY-101 can proceed as planned.

 

I have my work cut out for me, now that I have to include the change of bracket and KOSO meter.

 

Looks like it might be a 24-hr DIY session after all.

 

Hahaha.. So sorry Lawrence!!

 

And guess what, I ran out of petrol last night. Sien!

 

Big thanks to Chung and Alfian for helping me out! Kopi on me next time guys!

 

Lawrence, i think you're too addicted to ultimateparts and other websites. Try looking at your credit card bill, might cure the addiction!

[quikslvr]

Hahaha.. So sorry Lawrence!!

 

And guess what, I ran out of petrol last night. Sien!

 

Big thanks to Chung and Alfian for helping me out! Kopi on me next time guys!

 

Lawrence, i think you're too addicted to ultimateparts and other websites. Try looking at your credit card bill, might cure the addiction!

 

alamak ran out of petrol? wheres ur bikemanship??

[Raptor]

Tuas track this coming Saturday night has the same deal. 7 PM to midnight for $30. Leather suits optional. Minimum is jeans, jacket, gloves, boots and full face helmet.

 

This info for those who are interested.

[Codockz]

Thanks Lawrence, payment made please check.

 

Order for the following has been placed and confirmed:

 

- speedo gear (£38.80/ S$90.70) excluding shipping

 

Sub Zero & Codockz,

 

Please make payment before 26 September. You can pay for the shipping upon collection of your items.

 

Thanks!

[priller07]

Hahaha.. So sorry Lawrence!!

 

And guess what, I ran out of petrol last night. Sien!

 

Big thanks to Chung and Alfian for helping me out! Kopi on me next time guys!

 

Lawrence, i think you're too addicted to ultimateparts and other websites. Try looking at your credit card bill, might cure the addiction!

 

Alamak!!! So sorry to hear that dude!! I was wondering where u guys went, suddenly disappear. Then Khai came, and i assumed all was ok. **** man.. So sorry.... If i knew i would've helped out too.. :cry: