Aprilia Riders

shadantou · September 25, 2009

bro lawerence, im very busy with my work, and friends. can i have special request? i meet u during diy, and let u know my orders. then i straight pass u cash. or transfer on the spot.

if u cant let me know! i work thru this midnight to get the orders done. lol!

mrcheese · September 25, 2009

hi aprilia riders.

finally i will be getting my 2003 aprilia rs125 on monday after selling off my SP about a month ago.

looking forward to join you guys for meetups to learn more about the bike and make more friends.

ride safe bros.

edit: sorry but cant join your guys anymore due to personal reasons.

Edited October 20, 2009 by mrcheese

IZECUBEZ · September 25, 2009

hi aprilia riders.
finally i will be getting my 2003 aprilia rs125 on monday after selling off my SP about a month ago.
looking forward to join you guys for meetups to learn more about the bike and make more friends.

ride safe bros.

What are you? Parmesan or Cheddar?

Welcome, ride safe and if you got any questions, use the "Search this thread" function on the top right side of the page. LOL

IZECUBEZ · September 25, 2009

Online Purchase from PJ Engineering

PJ Engineering Website

RS125 34mm Carburettor Inlet Manifold is available on PJ Engineering.

Those interested to replace your aging carb inlet manifold and any other parts from PJE for that matter, please add your name to the list below. Closing Date is 25 September 2009.

Payment must be made before 27 September 2009.

Any orders placed after 25 Sept 09; or payment made after the 27 Sept 09 will be void and refunded.

Shipping costs will be divided among all orders according to the percentage cost of your orders in proportion to the total cost. Payment for shipping costs shall be made upon collection of items.

Format:

No. Name/ Item (Quantity)/ Cost

1. Lawrence/ 34mm Carb Inlet Manifold (2)/ Â£65.98

2. Lawrence/ 34mm Carburetor Pre 2006 (1)/ Â£126.08

3. Lawrence/ VHSB 34LD Pilot Jet Size B36 (1)/ Â£7.95

4. Lawrence/ VHSB Main Jet Size 148 (1)/ Â£4.68

5. Lawrence/ VHSB Main Jet Size 150 (1)/ Â£4.68

6. Lawrence/ VHSB Main Jet Size 152 (1)/ Â£4.68

7. Lawrence/ VHSB Main Jet Size 155 (1)/ Â£4.68

8. Lawrence/ VHSB Main Jet Size 158 (1)/ Â£4.68

9. Lawrence/ BRAKING Wavey Front Disc (1)/ Â£156.51

10. IZECUBEZ/ Balance Shaft Gear (2)/ Â£30.62

11. IZECUBEZ/ Aprilia RS125 Oil Pump Drive Gear (1)/ Â£23.98

Just add on to the list according to the above format.

Order List closing date is 25 Sept 09 0000hrs.

Payment closing date is 27 Sept 09 0000hrs.

I will place orders and make payment by credit card on 27 Sept 09 0100hrs. Any requests after midnight of 27 Sept 09 will not be entertained.

OPERATION DIY 101

The Major DIY Session not to be missed!

Register soon! Only 10 vacancies available!

Date: 27 September Sunday

Time: 0900-2300hrs

Venue: Block 21 Joo Seng Road Singapore 360021

Curriculum to be covered:

- Carburetor servicing

- Exhaust valve servicing

- Installation of fuel level sensor

- Installation of license plate bracket

- Replacement of ignition cover

- Replacement of reed valves

- Replacement of fuel hoses

- Replacement of brake springs

- Replacement of brake pads

- Installation of throttle cable elbow

- Installation of fuel filters

- Installation of fuel connectors

- Installation of oil supply hoses

- Installation of swivel gear lever

As this is a major DIY session, I do expect everyone to bring their own rags, solvents, steel brushes and tools. Also note that as it is a DIY session, I will advise you on your workmanship, but I will refrain from assisting you to avoid liabilities. If you make me work on your bike, I will charge you labour fees.

If you wish to be provided equipment (so that you don't have to pack them over), please feel free to make a S$35 donation which will ensure you have rags, cleaning solvents, brushes and necessary tools.

If you bring your own equipment, DIY is free!

Please confirm attendance below, followed by 'YES' if you want to be provided with cleaning equipment (rags, solvents, brushes, tools) so that I can go purchase extra kits (you get to keep your own equipment after the session):

1. lacrimosae/YES

2. Joy

3. Sub Zero

4. tknge

5. Patrick

6. schwein.bissen

7. IZECUBEZ

8. shadantou

9. Jiro

10. fatnobo/YES

YoShiKi1605198827 · September 25, 2009

Actually, you are right. It's not the speed of the bike, but the rather the sharp acceleration and heavy braking that require these kind of damping. However, i still feel that none of us can sooo good that we need this kind of suspension do we?

How much was your rebuilt? You're using WP is it?

its is actually not the sharp acceleration and heavy braking in order to feel the effect . . . patrick's (insaint) bike is equip with welber (high/low speed) I do felt the differents with my WP . . . even when normal riding u can already feel that its more stable . . . though my shock is setup properly to my weight, personally I do feel there is still limitations to wat an old design shock can do . . .

I rebuilt the WP for $280 . . . until now no issue . . . still riding happily . . .

fatnobo · September 25, 2009

Online Purchase from PJ Engineering

PJ Engineering Website

RS125 34mm Carburettor Inlet Manifold is available on PJ Engineering.

Those interested to replace your aging carb inlet manifold and any other parts from PJE for that matter, please add your name to the list below. Closing Date is 25 September 2009.

Payment must be made before 27 September 2009.

Any orders placed after 25 Sept 09; or payment made after the 27 Sept 09 will be void and refunded.

Shipping costs will be divided among all orders according to the percentage cost of your orders in proportion to the total cost. Payment for shipping costs shall be made upon collection of items.

Format:
No. Name/ Item (Quantity)/ Cost

1. Lawrence/ 34mm Carb Inlet Manifold (2)/ Â£65.98
2. Lawrence/ 34mm Carburetor Pre 2006 (1)/ Â£126.08
3. Lawrence/ VHSB 34LD Pilot Jet Size B36 (1)/ Â£7.95
4. Lawrence/ VHSB Main Jet Size 148 (1)/ Â£4.68
5. Lawrence/ VHSB Main Jet Size 150 (1)/ Â£4.68
6. Lawrence/ VHSB Main Jet Size 152 (1)/ Â£4.68
7. Lawrence/ VHSB Main Jet Size 155 (1)/ Â£4.68
8. Lawrence/ VHSB Main Jet Size 158 (1)/ Â£4.68
9. Lawrence/ BRAKING Wavey Front Disc (1)/ Â£156.51
10. IZECUBEZ/ Balance Shaft Gear (2)/ Â£30.62
11. IZECUBEZ/ Aprilia RS125 Oil Pump Drive Gear (1)/ Â£23.98

Just add on to the list according to the above format.

Order List closing date is 25 Sept 09 0000hrs.

Payment closing date is 27 Sept 09 0000hrs.

I will place orders and make payment by credit card on 27 Sept 09 0100hrs. Any requests after midnight of 27 Sept 09 will not be entertained.

OPERATION DIY 101

The Major DIY Session not to be missed!

Register soon! Only 10 vacancies available!

Date: 27 September Sunday
Time: 0900-2300hrs
Venue: Block 21 Joo Seng Road Singapore 360021

Curriculum to be covered:
- Carburetor servicing
- Exhaust valve servicing
- Installation of fuel level sensor
- Installation of license plate bracket
- Replacement of ignition cover
- Replacement of reed valves
- Replacement of fuel hoses
- Replacement of brake springs
- Replacement of brake pads
- Installation of throttle cable elbow
- Installation of fuel filters
- Installation of fuel connectors
- Installation of oil supply hoses
- Installation of swivel gear lever

As this is a major DIY session, I do expect everyone to bring their own rags, solvents, steel brushes and tools. Also note that as it is a DIY session, I will advise you on your workmanship, but I will refrain from assisting you to avoid liabilities. If you make me work on your bike, I will charge you labour fees.

If you wish to be provided equipment (so that you don't have to pack them over), please feel free to make a S$35 donation which will ensure you have rags, cleaning solvents, brushes and necessary tools.
If you bring your own equipment, DIY is free!

Please confirm attendance below, followed by 'YES' if you want to be provided with cleaning equipment (rags, solvents, brushes, tools) so that I can go purchase extra kits (you get to keep your own equipment after the session):

1. lacrimosae/YES
2. Joy
3. Sub Zero
4. tknge
5. Patrick
6. schwein.bissen
7. IZECUBEZ
8. shadantou
9. Jiro

sorry, someone stood me up. no one's willing to take over my duty last minute. sorry if i caused any trouble..

hitlerstalin · September 25, 2009

Online Purchase from PJ Engineering

PJ Engineering Website

RS125 34mm Carburettor Inlet Manifold is available on PJ Engineering.

Those interested to replace your aging carb inlet manifold and any other parts from PJE for that matter, please add your name to the list below. Closing Date is 25 September 2009.

Payment must be made before 27 September 2009.

Any orders placed after 25 Sept 09; or payment made after the 27 Sept 09 will be void and refunded.

Shipping costs will be divided among all orders according to the percentage cost of your orders in proportion to the total cost. Payment for shipping costs shall be made upon collection of items.

Format:
No. Name/ Item (Quantity)/ Cost

1. Lawrence/ 34mm Carb Inlet Manifold (2)/ Â£65.98
2. Lawrence/ 34mm Carburetor Pre 2006 (1)/ Â£126.08
3. Lawrence/ VHSB 34LD Pilot Jet Size B36 (1)/ Â£7.95
4. Lawrence/ VHSB Main Jet Size 148 (1)/ Â£4.68
5. Lawrence/ VHSB Main Jet Size 150 (1)/ Â£4.68
6. Lawrence/ VHSB Main Jet Size 152 (1)/ Â£4.68
7. Lawrence/ VHSB Main Jet Size 155 (1)/ Â£4.68
8. Lawrence/ VHSB Main Jet Size 158 (1)/ Â£4.68
9. Lawrence/ BRAKING Wavey Front Disc (1)/ Â£156.51
10.

Just add on to the list according to the above format.

Order List closing date is 25 Sept 09 0000hrs.

Payment closing date is 27 Sept 09 0000hrs.

I will place orders and make payment by credit card on 27 Sept 09 0100hrs. Any requests after midnight of 27 Sept 09 will not be entertained.

OPERATION DIY 101

The Major DIY Session not to be missed!

Register soon! Only 10 vacancies available!

Date: 27 September Sunday
Time: 0900-2300hrs
Venue: Block 21 Joo Seng Road Singapore 360021

Curriculum to be covered:
- Carburetor servicing
- Exhaust valve servicing
- Installation of fuel level sensor
- Installation of license plate bracket
- Replacement of ignition cover
- Replacement of reed valves
- Replacement of fuel hoses
- Replacement of brake springs
- Replacement of brake pads
- Installation of throttle cable elbow
- Installation of fuel filters
- Installation of fuel connectors
- Installation of oil supply hoses
- Installation of swivel gear lever

As this is a major DIY session, I do expect everyone to bring their own rags, solvents, steel brushes and tools. Also note that as it is a DIY session, I will advise you on your workmanship, but I will refrain from assisting you to avoid liabilities. If you make me work on your bike, I will charge you labour fees.

If you wish to be provided equipment (so that you don't have to pack them over), please feel free to make a S$35 donation which will ensure you have rags, cleaning solvents, brushes and necessary tools.
If you bring your own equipment, DIY is free!

Please confirm attendance below, followed by 'YES' if you want to be provided with cleaning equipment (rags, solvents, brushes, tools) so that I can go purchase extra kits (you get to keep your own equipment after the session):

1. lacrimosae/YES
2. Joy
3. Sub Zero
4. tknge
5. Patrick
6. schwein.bissen
7. IZECUBEZ
8. shadantou
9. Jiro
10. fatnobo/YES

hi bro,

Was wondering if i could squeeze into one more slot

for the diy session. Would appreciate alot since i know

that i could learn a lot from u guys. And yes i wud like to get

the tools also. Thanks!

lacrimosae · September 25, 2009

Online Purchase from PJ Engineering

Payment must be made before 27 September 2009.

Any orders placed after 25 Sept 09; or payment made after the 27 Sept 09 will be void and refunded.

Shipping costs will be divided among all orders according to the percentage cost of your orders in proportion to the total cost. Payment for shipping costs shall be made upon collection of items.

1. Lawrence/ 34mm Carb Inlet Manifold (2)/ Â£65.98

2. Lawrence/ 34mm Carburetor Pre 2006 (1)/ Â£126.08

3. Lawrence/ VHSB 34LD Pilot Jet Size B36 (1)/ Â£7.95

4. Lawrence/ VHSB Main Jet Size 148 (1)/ Â£4.68

5. Lawrence/ VHSB Main Jet Size 150 (1)/ Â£4.68

6. Lawrence/ VHSB Main Jet Size 152 (1)/ Â£4.68

7. Lawrence/ VHSB Main Jet Size 155 (1)/ Â£4.68

8. Lawrence/ VHSB Main Jet Size 158 (1)/ Â£4.68

9. Lawrence/ BRAKING Wavey Front Disc (1)/ Â£156.51

10. Codockz / Thermostat (1)/ Â£13.95

11. Codockz / Rear brake light switch (1)/ Â£10.50

12. Codockz / RS 125 logo grips (1)/ Â£16.51

13. IZECUBEZ/ Balance Shaft Gear (2)/ Â£30.62

14. IZECUBEZ/ Aprilia RS125 Oil Pump Drive Gear (1)/ Â£23.98

Order Request is CLOSED

Payment closing date is 27 Sept 09 at 0000hrs.

(which means payment must be made before 26 Sept 2359hrs)

I will place orders and make payment by credit card on 27 Sept 09 0100hrs.

Any payment made after 27 Sept 0100hrs will be refunded, since no money = no order.

Online Purchase from Ultimate Parts

Ultimate Parts Website

Closing Date to place orders is 1 October 2009, 0000hrs.

Payment must be made before 3 October 2009, 0000hrs.

Any orders placed after 1 October 09; or payment made after the 3 October 2009 will be void and refunded.

Shipping costs will be divided among all orders according to the percentage cost of your orders in proportion to the total cost. Payment for shipping costs shall be made upon collection of items.

Format:

No. Name/ Item (Quantity)/ Cost

1. Lawrence/ AP8120177 Headlight supp.snap (1)/ Â£

2. Lawrence/ AP8118343 Right half handlebar (1)/ Â£

3. Lawrence/ AP8118324 Left half handlebar (1)/ Â£

4. Lawrence/ AP8120793 Upper chain guide plate (1)/ Â£

5. Lawrence/ AP8120794 Lower chain guide plate (1)/ Â£

6. Lawrence/ AP0234431 Balance shaft gear (2)/ Â£

7. Lawrence/ AP8112906 RS125 Voltage Regulator (1)/ Â£

8. Lawrence/ AP0267915 Carburetor Flange (2)/ Â£

9. Lawrence/ AP8120783 Intake Hose (2)/ Â£

10. Lawrence/ AP8135785 San.cat.inst.h.frame (1)/ Â£

11. Lawrence/ AP8101819 Odometer gear (2)/ Â£

12.

As most of the parts that need replacing on my bike are done, there will not be anymore orders anytime soon after these last few orders.

If there is something you need, do place the order now.

To keep things clean and simple, add on to the Order List above. I will not accept order requests through email/PM/SMS etc.

Do take advantage of this to get stuff you need, while I'm letting you all piggyback on my shipment without any additional charges.

Edited September 25, 2009 by lacrimosae

lacrimosae · September 25, 2009

bro lawerence, im very busy with my work, and friends. can i have special request? i meet u during diy, and let u know my orders. then i straight pass u cash. or transfer on the spot.

if u cant let me know! i work thru this midnight to get the orders done. lol!

Is it that hard to cut and paste the items from the webby to here?

Could you get Vik to do it for you? Since you two are like super intimate love-birds... I'm sure you can 'pay' him certain oral favours...

You can pay in cash at the DIY. But if you insist on giving me the orders verbally, I must warn you, I have a very poor memory. I wont be liable for any mistakes or omissions. To save yourself the trouble, just add to the list here. I will only follow the list in the thread, so that if there is an error in the order, we will know who is responsible. Either I placed the wrong order (I will refund you full cash or you can choose to wait for next shipment), or you gave me the wrong part number/description (I will forfeit your payment, you must still pay for shipping and you get to keep the part you ordered, even if you don't need it).

I thought I didn't need to remind you all but I feel that I must:

I AM NOT DOING THIS FOR PROFIT. I AM DOING THIS AS A FAVOUR TO YOU. If you want to piggyback your orders, make things easier for me, things will be done smoothly. If you make things difficult for me, your money is no good to me. I'd rather take on less additional orders.

Thank you.

Edited September 25, 2009 by lacrimosae

lacrimosae · September 25, 2009

sorry, someone stood me up. no one's willing to take over my duty last minute. sorry if i caused any trouble..

So you actually put your name down and requested me to purchase something for you without a deposit, when you didn't even have the day available?

I don't care what your excuse is, what I want to know is:

HOW AND WHEN WILL YOU BE PAYING FOR THE $35 WHICH I HAVE SPENT BUYING YOU TOOLS AND SOLVENTS?

Oh wait, I guess I have hitlerstalin taking your place so it's ok.

Edited September 25, 2009 by lacrimosae

lacrimosae · September 25, 2009

hi bro,

Was wondering if i could squeeze into one more slot
for the diy session. Would appreciate alot since i know
that i could learn a lot from u guys. And yes i wud like to get
the tools also. Thanks!

Ok, its a set of:

- spark plug remover

- hex key set

- flat-head + phillips screwdriver

- cleaning solvent

- WD-40 or an equivalent type solvent

- made in Germany chamois cloth

Pls note that these are the bare necessities. There are other tools that you may discover necessary to carry and will probably get in future, but for now, this is the minimum you shld have.

Edited September 25, 2009 by lacrimosae

schwein.bissen · September 25, 2009

Ok, its a set of:

- spark plug remover
- hex key set
- flat-head + phillips screwdriver
- cleaning solvent
- WD-40 or an equivalent type solvent
- made in Germany chamois cloth

Pls note that these are the bare necessities. There are other tools that you may discover necessary to carry and will probably get in future, but for now, this is the minimum you shld have.

U got the stuff from Mustafa or Homely? Purchased the putty for moulding rear seat tray - from Homely ...

brandon. · September 26, 2009

eh sub zero why u nv help me! sensor is under which cat? i need to add to list!

mslambeater · September 26, 2009

Hey guys, have any of you ever used a steering damper on your RS125?

IZECUBEZ · September 26, 2009

the major diy session not to be missed!

Register soon! Only 10 vacancies available!

Date: 27 september sunday
time: 0900-2300hrs
venue: Block 2A Multi-Story Carpark, joo seng road singapore 360021

curriculum to be covered:
- carburetor servicing
- exhaust valve servicing
- installation of koso meter
- installation of license plate bracket
- replacement of front cowl bracket
- replacement of carburetor flange
- replacement of carburetor intake manifold
- replacement of vhsb carburetor gaskets
- replacement of ignition cover
- replacement of reed valves
- replacement of fuel hoses
- replacement of front and rear mudguards
- replacement of chain guard
- replacement of heel plates
- replacement of brake springs
- replacement of brake pads
- installation of throttle cable elbow
- installation of fuel filters
- installation of fuel connectors
- installation of oil supply hoses
- installation of oil tank filter kit
- installation of swivel gear lever

as this is a major diy session, i do expect everyone to bring their own rags, solvents, steel brushes and tools. Also note that as it is a diy session, i will advise you on your workmanship, but i will refrain from assisting you to avoid liabilities. If you make me work on your bike, i will charge you labour fees.

If you wish to be provided equipment (so that you don't have to pack them over), please feel free to make a s$35 donation which will ensure you have rags, cleaning solvents, brushes and necessary tools.
If you bring your own equipment, diy is free!

Please confirm attendance below, followed by 'yes' if you want to be provided with cleaning equipment (rags, solvents, brushes, tools) so that i can go purchase extra kits (you get to keep your own equipment after the session):

1. Lacrimosae/yes
2. Joy
3. Sub zero
4. Tknge
5. Patrick
6. Schwein.bissen
7. Izecubez
8. Shadantou
9. Jiro
10.hitlerstalin/yes

important update!!

change of location to Blk 2A Multi-Story Carpark. It is one enterance before blk 21. PLEASE TAKE NOTE!

Update on behalf of Lacrimosae as he's out of the house at the moment.

quikslvr · September 26, 2009

This wacky dude fitted our engine to his Lambretta 1963 scooter.

http://www.tjtuning.co.uk/forums/showthread.php?t=7707

http://i121.photobucket.com/albums/o226/caron666/P9110005.jpg

http://i121.photobucket.com/albums/o226/caron666/P9110007.jpg

http://i121.photobucket.com/albums/o226/caron666/P9110008.jpg

http://i121.photobucket.com/albums/o226/caron666/P9110009.jpg

Hello their im new to the forum and ive got something a bit different
its a 1963 lambretta scooter with a aprillia rs 125 engine in it
ive fitted a pollini 154 kit 34 delorto vforce3 read valve and a modified arrow pipe
Its ace had 87mph out of it on gps at 11k revs
gearing is 17 front 28 rear on 10inch rims

87mph is 140km/h.Very very creative! will eat my bike for sure!

lacrimosae · September 26, 2009

This wacky dude fitted our engine to his Lambretta 1963 scooter.

87mph is 140km/h.Very very creative! will eat my bike for sure!

It looks like something my RS125 ate for breakfast and excreted out of its arse exhaust.

I'll bet my last dollar its handling sucks and if it weren't as ugly as sin, I might consider setting it on fire instead of running it over with a tank until flatter than garang-gunied aluminum drink cans.

I don't care if it does 140km/h. I'd rather rub broken glass and acid into my eyes than let my gaze fall upon such ugliness again.

It if were the last bike on earth, I'd hang myself with my shoelaces, after I've slashed my wrists and swallowed a few gallons of pesticides, rat poison, and whiskey.

Edited September 26, 2009 by lacrimosae

Sub Zero · September 26, 2009

]Online Purchase from PJ Engineering

PJ Engineering Website

RS125 34mm Carburettor Inlet Manifold is available on PJ Engineering.

Those interested to replace your aging carb inlet manifold and any other parts from PJE for that matter, please add your name to the list below. Closing Date is 25 September 2009.

Payment must be made before 27 September 2009.

Any orders placed after 25 Sept 09; or payment made after the 27 Sept 09 will be void and refunded.

Shipping costs will be divided among all orders according to the percentage cost of your orders in proportion to the total cost. Payment for shipping costs shall be made upon collection of items.

Format:

No. Name/ Item (Quantity)/ Cost

1. Lawrence/ 34mm Carb Inlet Manifold (2)/ Â£65.98

2. Lawrence/ 34mm Carburetor Pre 2006 (1)/ Â£126.08

3. Lawrence/ VHSB 34LD Pilot Jet Size B36 (1)/ Â£7.95

4. Lawrence/ VHSB Main Jet Size 148 (1)/ Â£4.68

5. Lawrence/ VHSB Main Jet Size 150 (1)/ Â£4.68

6. Lawrence/ VHSB Main Jet Size 152 (1)/ Â£4.68

7. Lawrence/ VHSB Main Jet Size 155 (1)/ Â£4.68

8. Lawrence/ VHSB Main Jet Size 158 (1)/ Â£4.68

9. Lawrence/ BRAKING Wavey Front Disc (1)/ Â£156.51

10. IZECUBEZ/ Balance Shaft Gear (2)/ Â£30.62

11. IZECUBEZ/ Aprilia RS125 Oil Pump Drive Gear (1)/ Â£23.98

12. Shadantou/ 34mm Carb Inlet Manifold (1)/ Â£65.98

13. Shadantou/ 34mm Carburetor Post 2006 (1)/ Â£131.86

14. Shadantou/ VHSB Main Jet Size 150 (1)/ Â£4.68

15. Shadantou/ VHSB Main Jet Size 152 (1)/ Â£4.68

16. Shadantou/ VHSB Main Jet Size 155 (1)/ Â£4.68

17. Shadantou/ VHSB Main Jet Size 158 (1)/ Â£4.68

18. Shadantou/ RS125 Pipercross Cone Air Filter (1)/ Â£21.27

Just add on to the list according to the above format.

Order List closing date is 25 Sept 09 0000hrs.

Payment closing date is 27 Sept 09 0000hrs.

I will place orders and make payment by credit card on 27 Sept 09 0100hrs. Any requests after midnight of 27 Sept 09 will not be entertained.

Edited September 26, 2009 by Sub Zero

khai_b-boy · September 26, 2009

Hey guys . think of buying an rs 125 y2k model .. hardly see them lying around in shops for sale .. Any of you guys saw or selling one ? . ahahkz thanks ..

shinya · September 26, 2009

This wacky dude fitted our engine to his Lambretta 1963 scooter.
[deleted]
87mph is 140km/h.Very very creative! will eat my bike for sure!

Wow that is very cool. I know some ppl in europe have offical race of these kind of motors and it really need big balls to ride on these machines. It don't have very strong frame, not very good brake and also different weight distribution. Ugly or not, it is some prople's serious race machine and also showing the passion and determination. I think it deserves some respect from us since it got an Aprilia heart inside:thumb:.

quikslvr · September 27, 2009

It looks like something my RS125 ate for breakfast and excreted out of its arse exhaust.

I'll bet my last dollar its handling sucks and if it weren't as ugly as sin, I might consider setting it on fire instead of running it over with a tank until flatter than garang-gunied aluminum drink cans.

I don't care if it does 140km/h. I'd rather rub broken glass and acid into my eyes than let my gaze fall upon such ugliness again.

It if were the last bike on earth, I'd hang myself with my shoelaces, after I've slashed my wrists and swallowed a few gallons of pesticides, rat poison, and whiskey.

yeah its ugly but give credits to the guy.considering what he has done to a nearly 50 year old scooter,its admiring.

Jiro · September 27, 2009

Online Purchase from PJ Engineering

PJ Engineering Website

RS125 34mm Carburettor Inlet Manifold is available on PJ Engineering.

Those interested to replace your aging carb inlet manifold and any other parts from PJE for that matter, please add your name to the list below. Closing Date is 25 September 2009.

Payment must be made before 27 September 2009.

Any orders placed after 25 Sept 09; or payment made after the 27 Sept 09 will be void and refunded.

Shipping costs will be divided among all orders according to the percentage cost of your orders in proportion to the total cost. Payment for shipping costs shall be made upon collection of items.

Format:

No. Name/ Item (Quantity)/ Cost

1. Lawrence/ 34mm Carb Inlet Manifold (2)/ Â£65.98

2. Lawrence/ 34mm Carburetor Pre 2006 (1)/ Â£126.08

3. Lawrence/ VHSB 34LD Pilot Jet Size B36 (1)/ Â£7.95

4. Lawrence/ VHSB Main Jet Size 148 (1)/ Â£4.68

5. Lawrence/ VHSB Main Jet Size 150 (1)/ Â£4.68

6. Lawrence/ VHSB Main Jet Size 152 (1)/ Â£4.68

7. Lawrence/ VHSB Main Jet Size 155 (1)/ Â£4.68

8. Lawrence/ VHSB Main Jet Size 158 (1)/ Â£4.68

9. Lawrence/ BRAKING Wavey Front Disc (1)/ Â£156.51

10. IZECUBEZ/ Balance Shaft Gear (2)/ Â£30.62

11. IZECUBEZ/ Aprilia RS125 Oil Pump Drive Gear (1)/ Â£23.98

12. Shadantou/ 34mm Carb Inlet Manifold (1)/ Â£65.98

13. Shadantou/ 34mm Carburetor Post 2006 (1)/ Â£131.86

14. Shadantou/ VHSB Main Jet Size 150 (1)/ Â£4.68

15. Shadantou/ VHSB Main Jet Size 152 (1)/ Â£4.68

16. Shadantou/ VHSB Main Jet Size 155 (1)/ Â£4.68

17. Shadantou/ VHSB Main Jet Size 158 (1)/ Â£4.68

18. Shadantou/ RS125 Pipercross Cone Air Filter (1)/ Â£21.27

19. Jiro/ Fuel Filter 7mm (1)/ Â£1.15

Just add on to the list according to the above format.

Order List closing date is 25 Sept 09 0000hrs.

Payment closing date is 27 Sept 09 0000hrs.

I will place orders and make payment by credit card on 27 Sept 09 0100hrs. Any requests after midnight of 27 Sept 09 will not be entertained.

Sub Zero · September 27, 2009

Online Purchase from PJ Engineering

PJ Engineering Website

RS125 34mm Carburettor Inlet Manifold is available on PJ Engineering.

Those interested to replace your aging carb inlet manifold and any other parts from PJE for that matter, please add your name to the list below. Closing Date is 25 September 2009.

Payment must be made before 27 September 2009.

Any orders placed after 25 Sept 09; or payment made after the 27 Sept 09 will be void and refunded.

Shipping costs will be divided among all orders according to the percentage cost of your orders in proportion to the total cost. Payment for shipping costs shall be made upon collection of items.

Format:

No. Name/ Item (Quantity)/ Cost

1. Lawrence/ 34mm Carb Inlet Manifold (2)/ Â£65.98

2. Lawrence/ 34mm Carburetor Pre 2006 (1)/ Â£126.08

3. Lawrence/ VHSB 34LD Pilot Jet Size B36 (1)/ Â£7.95

4. Lawrence/ VHSB Main Jet Size 148 (1)/ Â£4.68

5. Lawrence/ VHSB Main Jet Size 150 (1)/ Â£4.68

6. Lawrence/ VHSB Main Jet Size 152 (1)/ Â£4.68

7. Lawrence/ VHSB Main Jet Size 155 (1)/ Â£4.68

8. Lawrence/ VHSB Main Jet Size 158 (1)/ Â£4.68

9. Lawrence/ BRAKING Wavey Front Disc (1)/ Â£156.51

10. IZECUBEZ/ Balance Shaft Gear (2)/ Â£30.62

11. IZECUBEZ/ Aprilia RS125 Oil Pump Drive Gear (1)/ Â£23.98

12. Shadantou/ 34mm Carb Inlet Manifold (1)/ Â£65.98

13. Shadantou/ 34mm Carburetor Post 2006 (1)/ Â£131.86

14. Shadantou/ VHSB Main Jet Size 150 (1)/ Â£4.68

15. Shadantou/ VHSB Main Jet Size 152 (1)/ Â£4.68

16. Shadantou/ VHSB Main Jet Size 155 (1)/ Â£4.68

17. Shadantou/ VHSB Main Jet Size 158 (1)/ Â£4.68

18. Shadantou/ RS125 Pipercross Cone Air Filter (2)/ Â£42.54

19. Jiro/ Fuel Filter 7mm (1)/ Â£1.15

Just add on to the list according to the above format.

Order List closing date is 25 Sept 09 0000hrs.

Payment closing date is 27 Sept 09 0000hrs.

I will place orders and make payment by credit card on 27 Sept 09 0100hrs. Any requests after midnight of 27 Sept 09 will not be entertained.

Codockz · September 27, 2009

Online Purchase from PJ Engineering

PJ Engineering Website

RS125 34mm Carburettor Inlet Manifold is available on PJ Engineering.

Those interested to replace your aging carb inlet manifold and any other parts from PJE for that matter, please add your name to the list below. Closing Date is 25 September 2009.

Payment must be made before 27 September 2009.

Any orders placed after 25 Sept 09; or payment made after the 27 Sept 09 will be void and refunded.

Shipping costs will be divided among all orders according to the percentage cost of your orders in proportion to the total cost. Payment for shipping costs shall be made upon collection of items.

Format:

No. Name/ Item (Quantity)/ Cost

1. Lawrence/ 34mm Carb Inlet Manifold (2)/ Â£65.98

2. Lawrence/ 34mm Carburetor Pre 2006 (1)/ Â£126.08

3. Lawrence/ VHSB 34LD Pilot Jet Size B36 (1)/ Â£7.95

4. Lawrence/ VHSB Main Jet Size 148 (1)/ Â£4.68

5. Lawrence/ VHSB Main Jet Size 150 (1)/ Â£4.68

6. Lawrence/ VHSB Main Jet Size 152 (1)/ Â£4.68

7. Lawrence/ VHSB Main Jet Size 155 (1)/ Â£4.68

8. Lawrence/ VHSB Main Jet Size 158 (1)/ Â£4.68

9. Lawrence/ BRAKING Wavey Front Disc (1)/ Â£156.51

10. IZECUBEZ/ Balance Shaft Gear (2)/ Â£30.62

11. IZECUBEZ/ Aprilia RS125 Oil Pump Drive Gear (1)/ Â£23.98

12. Shadantou/ 34mm Carb Inlet Manifold (1)/ Â£65.98

13. Shadantou/ 34mm Carburetor Post 2006 (1)/ Â£131.86

14. Shadantou/ VHSB Main Jet Size 150 (1)/ Â£4.68

15. Shadantou/ VHSB Main Jet Size 152 (1)/ Â£4.68

16. Shadantou/ VHSB Main Jet Size 155 (1)/ Â£4.68

17. Shadantou/ VHSB Main Jet Size 158 (1)/ Â£4.68

18. Shadantou/ RS125 Pipercross Cone Air Filter (2)/ Â£42.54

19. Jiro/ Fuel Filter 7mm (1)/ Â£1.15

20. Codockz / Thermostat (1)/ Â£13.95

21. Codockz / Rear brake light switch (1)/ Â£10.50

22. Codockz / RS 125 logo grips (1)/ Â£16.51

Just add on to the list according to the above format.

Order List closing date is 25 Sept 09 0000hrs.

Payment closing date is 27 Sept 09 0000hrs.

I will place orders and make payment by credit card on 27 Sept 09 0100hrs. Any requests after midnight of 27 Sept 09 will not be entertained.

xcore · September 27, 2009

Looks like after the absence of some ex aprilia riders, some people are getting all cocky and bossy again.

Sign In

Join SingaporeBikes.com today! Where Singapore Bikers Unite!

Aprilia Riders

Recommended Posts

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Join the conversation

Similar Content

Latest Topics