[Group] SBF Yamaha X-1r 135

[NiLa0Peh]

see how ba..when i get back then contact u ...

[highwind88]

thanks idavid.. no wonder it died when i put it dwn for too long. haah too rich of petrol

[Zack83]

yup thats the choke. suppose to be up, to use it pull it down.. =)

 

My choke is at somewhere else.. WAhahahaa..

[highwind88]

oh ya.. another qn.. for our tires ya.. normally need pump how much air is ideal ah? i went to the petrol station to try pump air earlier.. pluck in the "stick", the reading read 370kpa.. scary.. i tot average should be ard 220?

[LTC]

oh ya.. another qn.. for our tires ya.. normally need pump how much air is ideal ah? i went to the petrol station to try pump air earlier.. pluck in the "stick", the reading read 370kpa.. scary.. i tot average should be ard 220?

 

370 is way too high. For me 200/220. That's when tyre not warm.

[highwind88]

yep i tot so too.. i rmb i always pump ard 230 for cars.. so 370 was a shocked to me. quite surprise the tires nvr give way.. maybe the motor shop praying my tire gib way n slide.. then can earn repair fee!! haha

[LTC]

yep i tot so too.. i rmb i always pump ard 230 for cars.. so 370 was a shocked to me. quite surprise the tires nvr give way.. maybe the motor shop praying my tire gib way n slide.. then can earn repair fee!! haha

 

Most likely nothing will happen to the tyre unless a certain impact.

Usually shop change tyre will pump high pressure to ensure the tyre in the rim...

[chinhuahaw]

anybody got caught by TP before ? got requested to go down for a inspection tml =(

[NiLa0Peh]

hais..dave..sian ar..how

[LTC]

anybody got caught by TP before ? got requested to go down for a inspection tml =(

 

Caught for wat?

[chinhuahaw]

hais..dave..sian ar..how

 

i more sian

 

Caught for wat?

 

remove silencer T.T, my fren said he fine for $500 considered as illegal mod exhaust

[LTC]

remove silencer T.T, my fren said he fine for $500 considered as illegal mod exhaust

 

U suppose to get it fixed before inspection right? If so not only 500. U still have to consider the money u pay the workshop.

[chinhuahaw]

T.T i regretted, i fixed it back already, promise not to remove it again

[Clon3]

Still give you chance to go on another day, I was caught and escorted to inspection centre right outside my house.... I was fined $350 for removing the diffuser

[afiqq]

which shops offer installments for pipes?

[LTC]

When I get stopped at Traffic Police Roadblock...

They look at me then my bike.

They ask me to go...

Dun even want to check me...

LOL...

[nightman82000]

Hai guys I have a question hope any of u can answer.I have bought a bike and I have sign the agreement but I have forgot to ask them when I collect the bike do I need to paid anymore cause on the sale paper only stated the bike price,insurance,interest and the monthly payment.it did not stated abt the paperwork or the GST.Thank hope bros here can clear my mind.

Edited July 16, 2011 by nightman82000
Continue

[LTC]

Hai guys I have a question hope any of u can answer.I have bought a bike and I have sign the agreement but I have forgot to ask them when I collect the bike do I need to paid anymore cause on the sale paper only stated the bike price,insurance,interest and the monthly payment.it did not stated abt the paperwork or the GST.Thank hope bros here can clear my mind.

 

U should clarify with the salesperson. Different shop different style.

[Flo_rider]

Anyone tried a large rear sprocket size like 42 before? How's the pick up difference like?

[FisherPrice]

Found this somewhere in forum but forget where...Edit abit here and there..

Might be usefull if you wanna experiment..

 

 

Formula :

(no. teeth in rear sprocket)/(no. teeth in front sprocket) = gear ratio

i.e. driven / drive = gear ratio

 

16 35 = 2.19

16 36 = 2.25

16 37 = 2.31

15 35 = 2.33

16 38 = 2.38

15 36 = 2.4

16 39 = 2.44

15 37 = 2.47

16 40 = 2.5

14 35 = 2.5

15 38 = 2.53

16 41 = 2.56

14 36 = 2.57

 

15 39 = 2.6 Stock gear ratio

 

16 42 = 2.63

14 37 = 2.64

15 40 = 2.67

16 43 = 2.69

14 38 = 2.71

15 41 = 2.73

16 44 = 2.75

14 39 = 2.79

15 42 = 2.8

16 45 = 2.81

14 40 = 2.86

15 43 = 2.87

16 46 = 2.88

14 41 = 2.93

15 44 = 2.93

16 47 = 2.94

15 45 = 3

14 42 = 3

15 46 = 3.07

14 43 = 3.07

14 44 = 3.14

14 45 = 3.21

14 46 = 3.29

 

so if you want more top speed than stock settings

use green with lower ratio

 

 

if you want more acceleration

use red with a higher ratio

 

But you cant have both.. Its either speed or fast pick up.. increasing one will affect the other. So must choose. If you got the money and time try different setting and see which suits you.

 

I dunno our bike can fit until wat size for rear sprocket haha.. at most tried 41..

[LTC]

Found this somewhere in forum but forget where...Edit abit here and there..

Might be usefull if you wanna experiment..

 

 

Formula :

(no. teeth in rear sprocket)/(no. teeth in front sprocket) = gear ratio

i.e. driven / drive = gear ratio

 

16 35 = 2.19

16 36 = 2.25

16 37 = 2.31

15 35 = 2.33

16 38 = 2.38

15 36 = 2.4

16 39 = 2.44

15 37 = 2.47

16 40 = 2.5

14 35 = 2.5

15 38 = 2.53

16 41 = 2.56

14 36 = 2.57

 

15 39 = 2.6 Stock gear ratio

 

16 42 = 2.63

14 37 = 2.64

15 40 = 2.67

16 43 = 2.69

14 38 = 2.71

15 41 = 2.73

16 44 = 2.75

14 39 = 2.79

15 42 = 2.8

16 45 = 2.81

14 40 = 2.86

15 43 = 2.87

16 46 = 2.88

14 41 = 2.93

15 44 = 2.93

16 47 = 2.94

15 45 = 3

14 42 = 3

15 46 = 3.07

14 43 = 3.07

14 44 = 3.14

14 45 = 3.21

14 46 = 3.29

 

 

OMG.... Mechanics back in my poly days 10 years ago... lol...

Nice. Very informative....

[Kioz]

hi guys,

 

just need some help here as it's been awhile since i rode a 2b.

and im planning to get one for transport.

 

firstly, if i were to do the following:

 

1) yoshi fs

2) yoshi carb ( shop told me to get sp carb as it's good enough but im a very skeptical person. any diff? )

3) a full URA big bore kit 57m or 60mm ( any diff and according to my research, URA is the best? )

4) racing cdi

5) oversize brake disc better or should i just buy the breaking disc stock size?

 

so my questions are:

1) will the piston jam?

2) will the engine break down within a year?

3) do i need to overhual within a year?

4) will the engine still be the " bullet prove " kind after doing big bore?

 

anyways i plan to get a spark or x1r as a side bike as i've got a class 2 bike and am getting another one really soon.

however i really need the fun factor in all my rides so before i get started i need some advise from the fellow experienced kup riders here.

 

P.S am looking for either a spark 135 or X1R

in a scraped or wrecked condition that had been into an accident before.

( yes really bad condition also not an issue we can always discuss )

mainly im looking for a cheap one due to the fact that im going to " restore the bike "

and regardless the condition and i dont give a damn about the outlooks.

 

anyone letting go can PM me to discuss.

Edited July 17, 2011 by Kioz

[Joe18]

haha..alamak you uh..if use energizer bike fly high sia..haha

aniway the battery that we are using can be charge right?

[Joe18]

quoted 50 bucks in singapore. quoted 65 rm in jb. which one you want?

 

haha JB LAI ! aniway the battery that we use can recharge right?

[Nike]

Evening.. My friend told me that they saw a new GPR pipe that look like the 1st gen except it is shorter abit.. so i just wondering, if anyone have hear the pipe before? the sound and performance. thx