GSX400RR Riders

[ben2306]

Yup2 Alvis bike is the spII model but i guess after changing hands(transfers) for 13 times (Im the 13th owner) i guess somewhere along the line the previous owners go and change the rear shocks.

 

History of GSXR400. For G4 riders reading pleasure.

 

http://www.suzukicycles.org/photos/suzuki-history/1992/1992_GSX-R400_SP_450.jpg This is the original paintwork of my G4.

so what model your coe states? cos i see you put gsxr400RN in your sigg. mine is gsxr400rr... but mine is a "P" MODEL.

[Yatz86]

Wait a minute, I thought that it's because of the power cut that the HP is 53hp?

 

no lah its because of japan change in regulations that why the later G4 model got 53bhp. nothing to do with powercut. G4 can clear meter anytime. its slower for the other models models though

 

Horsepower is the torque of the bike bro. Power cut is when u exceeded a certain speed limit then your whole bike the engine will die off. Thats why riders change the CDI of their bikes as the CDI is the thing that controls the power cut. Correct me if I'm wrong anyone?

 

 

power cut is u cant go any more faster than than the whole meter cause the CDI is programmed to block u from doing so. the engine wont die dont worry. imagine going 220km/h den engine die, scary rite:cheeky:

[jaz86]

Hey hey.. new member signing in.. Thou I awkward position but hope i'll get used to it soon!

 

Great Bike..

[ben2306]

Hey hey.. new member signing in.. Thou I awkward position but hope i'll get used to it soon!

 

Great Bike..

welcome to the small family.. i'm ben here. bought your g4 frm who? pm me?

[ben2306]

jaz86, male or female rider??

[LuckyThirteen]

so what model your coe states? cos i see you put gsxr400RN in your sigg. mine is gsxr400rr... but mine is a "P" MODEL.

It states GSXR400RN in the logcard registered in 1992.

 

power cut is u cant go any more faster than than the whole meter cause the CDI is programmed to block u from doing so. the engine wont die dont worry. imagine going 220km/h den engine die, scary rite:cheeky:

Oh ok now i understand

 

Hey hey.. new member signing in.. Thou I awkward position but hope i'll get used to it soon!

Great Bike..

Welcome to the G4 family bro

 

jaz86, male or female rider??

well by the nick should be a male rider. Speaking of which, I never see any ladies riding G$

[spaiduhz]

Hi guys, I am thinking of doing a self spray of my bike. Need to get the paint off first though, so i was wondering if its possible to use paint stripper on the fairing without melting the fairing itself?

 

using sandpaper on the bike will be a pain in the ass since it has so many coats of paint. i am guessing that the thickness of the paint + primer layer would be over 1mm thick already.

[ben2306]

It states GSXR400RN in the logcard registered in 1992.

 

 

Oh ok now i understand

 

 

Welcome to the G4 family bro

 

 

well by the nick should be a male rider. Speaking of which, I never see any ladies riding G$

hahaha, ok.

 

Hi guys, I am thinking of doing a self spray of my bike. Need to get the paint off first though, so i was wondering if its possible to use paint stripper on the fairing without melting the fairing itself?

 

using sandpaper on the bike will be a pain in the ass since it has so many coats of paint. i am guessing that the thickness of the paint + primer layer would be over 1mm thick already.

thats not easy, man. i tried once on my sp, failed... when you doing?? can i go dwn see look?

[ben2306]

guys, i'm thinking of changing my fuel jets when i service my carb. planet got stock 4 fuel jet?? anybody gg dwn, pls chk 4 me. i nvr go b4.

g4 fuel jets any diff frm other 400cc's? all same?

cos my fc quite high.

[Silent Hunter]

Hey guys, anyone have front brake disc & thermostat?

 

Did quite a bit on my bike, for the Malaysia trip, new clutch plates, replaced reserve knob, new stebel horn, new lining for carb, new meter.

 

Wanted to do up the disc & thermostat, but no stock.

 

Aiya, Ben never post eariler, went to Planet yesterday.

 

Spai_duhz. Doing up fairings DIY huh?

Interested also.

[ben2306]

silent hunter, if gg again, remember to chk 4 me. thanks.

disc not cheap, $200+ per piece, new 1, ks can get.

[ahcongie]

hihi .. new member here =X yatz long time no seee how u !!

[Yatz86]

hihi .. new member here =X yatz long time no seee how u !!

 

still the same loh, except no more g4:cheeky:

[Silent Hunter]

Ok Ben, next time go I ask, but must tell you first.

 

It may be quite a long while before I visit Planet again.

[spaiduhz]

to get the paint off properly i will have to get the paint off.

 

I found a nice quiet spot to store my fairings while waiting for the paint to dry, however i am a little concerned that the damp conditions may lead to the paint ending up spotty.

 

Plus, waiting for a nice hot day this rainy season would further delay this little project.

 

I am not thinking of much, just want to turn the bike all matt black, from the fairings to the frame.

 

I am guessing it will take about two weeks for the paint to be complete. this is not including the amount of time stripping the paint from the fairing.

[spaiduhz]

and my plug coils are mucking up again. i dont know if its because of the extended amount of time it spent in the rain earlier this afternoon or what, but i should change the entire plug coil.

[LuckyThirteen]

Hi guys, I am thinking of doing a self spray of my bike. Need to get the paint off first though, so i was wondering if its possible to use paint stripper on the fairing without melting the fairing itself?

 

using sandpaper on the bike will be a pain in the ass since it has so many coats of paint. i am guessing that the thickness of the paint + primer layer would be over 1mm thick already.

Its good to try and DIY stuff for our bike however its kinda "painful" process. I've ever stripped my G4(not too long ago) to see the inside of the bike however took me 2 hrs(most probably lack of the essential tools) and another 2 hrs to put it back together(I was alone at that time). And to do a self spray is not easy but not impossible. However time is the essence. It took me and my frens 3 days to self spray one of my frens 125z. Its good if you have the hand held buffer machine to remove the paintwork. I suggest u try it on a spare fairing 1st to see the outcome.

 

silent hunter, if gg again, remember to chk 4 me. thanks.

disc not cheap, $200+ per piece, new 1, ks can get.

$280/ piece to be exact.

 

hihi .. new member here =X yatz long time no seee how u !!

 

Hey one of the "old birds" btw bro that yoshimura full system in ur signature looks like it can fit a G4. Is it street legal?

[ben2306]

guys, where can i get the suzuki sticker ah??

to paste @ the bottom fairing 1.

any recommandation?

[Yatz86]

guys, where can i get the suzuki sticker ah??

to paste @ the bottom fairing 1.

any recommandation?

 

should be able to cutomised @ auntie shop opposite eminent plaza.

[ben2306]

they always say auntie shop, i dont knw where!!

its ok, i'll try to find out. thanks.

[Yatz86]

they always say auntie shop, i dont knw where!!

its ok, i'll try to find out. thanks.

 

its opposite eminent plaza. (near jalan besar) try checking streetdirectory.

[LuckyThirteen]

or u can try the "Auntie" shop near 219 Lavender St

[Zubir]

Friends,

 

I am looking for a thread to ask a Q on my Suzuki GSR (400), but I could not find a thread.

Can I ask here or any one could refer me to a thread please.

 

Thanks.

[NoobzRider]

im sellin my yoshi pipe.. anyone interested?

[Yatz86]

Friends,

 

I am looking for a thread to ask a Q on my Suzuki GSR (400), but I could not find a thread.

Can I ask here or any one could refer me to a thread please.

 

Thanks.

 

hm, ure bike not as much fairing as gixxer 4

 

but here goes (just click)

 

GSR 400/600 Thread