[Discussion] Super Four General Enquiry Thread

[jiachen85]

oh icic.. i only know at 6th gear 7k rpm will be about 105-110kmph.. tonight i try already then confirm my readings again.

yes sprocket size does make a slight difference.

 

Hmmm... Yeah... my sprocket is stock, front 15 teeth, rear 44 teeth.

Tonight I also will try at 7K wats the speed.

[jiachen85]

frm wad i noe is that when this happen when he is the 6 gear/highest one ..

i din noe sprocket size causes such huge difference ..

anyway he is a fren of mine .. haha ..

 

Yeah... I went back to bikeshop change to original pipe, the feeling totally different. Feel the bike much more stronger then the open pipe. Shiok...

haahaa...

 

At 1st they wanna take the spec 1 exhaust for me (not very good condition), but cannot fix, only got 1 spec 2 there, no choice take the spec 2... haahaa, cos the spec 2 better condition... lucky me.

[dragonforce]

Hmmm... Yeah... my sprocket is stock, front 15 teeth, rear 44 teeth.

Tonight I also will try at 7K wats the speed.

mine 5k is at 80km/h..

[jiachen85]

mine 5k is at 80km/h..

 

Hai... mie 5K is at 70km/hr only sad... is ur stock sprocket?

I tried at 7K is at 103km/hr like tt... how come mine so high RPM...

Out of tune maybe?

[dragonforce]

but your 7k ok mah.. lol.. mine not spec 2 hor.. paiseh forgot to mention that 1st. yup using stock sprockets..

[jiachen85]

but your 7k ok mah.. lol.. mine not spec 2 hor.. paiseh forgot to mention that 1st. yup using stock sprockets..

 

alright... thanks a lot, anyway, will go carb washing and tunning this sat... =)

[Burnt]

alright... thanks a lot, anyway, will go carb washing and tunning this sat... =)

 

Go ask bike shop see wad happen lor .. they noe better .. as in they can physically see the parts n stuff .. should be going wif u la .

[998R]

anybody selling or where to get this bike?

[edwardthy]

can check it out at garage sales under used bike section..

[Sharkz]

just need some feedback, is cb400 1 better or cb400 2, as getting 1 soon after selling my sp150. ???

[akirajo]

Is anybody scraping your super 4 ver S, i would like to exchange the front fork with you.

[Mizarahi]

Ha. I also wanna know anybody scraping a ver S.

I wanna swap the headlight assembly with my rxz sai tao.

Willing to pay a bit.

[dragonforce]

just need some feedback, is cb400 1 better or cb400 2, as getting 1 soon after selling my sp150. ???

 

other than vtec activation during different rpm.. there's not much significant difference, its hard to say which is better, factors to be considered. more importantly is whether that machine is well maintained or not.

 

Ha. I also wanna know anybody scraping a ver S.

I wanna swap the headlight assembly with my rxz sai tao.

Willing to pay a bit.

 

y not buy the headlight assembly from lab if its urgent? instead of waiting for some1 to scrap their ver s. just a suggestion.

cheers.

[rcck013]

Hey Guys,

 

I am looking for a rack + box for my Version S. Msg me @ 90685252.

Many Thanks

 

[achiok]

i have this problem of engine oil leakeage at the oil sump.. mechanic says i need a new oil sump(which the shop qoute me $180) if its still leaking after i change the drain plug.. anyone there noes whether i could get a 2nd hand one? stripping their bike parts? or cheaper brand new? thankz! sms me at 93368182.. kind of urgent

[oscar23]

hi anyone knows where to get shroud for super four spec III?

[dragonforce]

i have this problem of engine oil leakeage at the oil sump.. mechanic says i need a new oil sump(which the shop qoute me $180) if its still leaking after i change the drain plug.. anyone there noes whether i could get a 2nd hand one? stripping their bike parts? or cheaper brand new? thankz! sms me at 93368182.. kind of urgent

go bikeworkz at kaki bukit.. i changed mine there at $130 if i didnt recall wrongly..

[heipi]

guys, is it require to change chain and spocket when the chain cannot tighten anymore..

[joker888]

Hi guys, need help here. where can I download owner's manual & rapair service manual for spaec3.

[mitanca]

Sir, I would like to ask advise whether its okey to install a killswitch on my S4's headlight or not. Some say it would have an effect on the bike's CDI or Rectifier.. I wold like to have a second opinion.... thanks

 

 

MITANCA

Philippines

[ProFatSir]

Sir, I would like to ask advise whether its okey to install a killswitch on my S4's headlight or not. Some say it would have an effect on the bike's CDI or Rectifier.. I wold like to have a second opinion.... thanks

 

 

MITANCA

Philippines

 

its ok to do it.no problem

if the headlight is not on,nothing will happen to cdi and rectifier(take note this 2 things will need to be replace when the life span is up)

 

just get a good switch to do the job.(example engine cut off switch)

[oscar23]

Hi does ani one here knows how do it dulipcate super four spec 3 spare key , the most convenient and cheapest way?

thanks..

 

Cheers!~

[Burnt]

Hi does ani one here knows how do it dulipcate super four spec 3 spare key , the most convenient and cheapest way?

thanks..

 

Cheers!~

 

planet motor or unique motor. price around $50-$60.

[oscar23]

thx loads.. UNIQUE MOTOR and Planet Motor , is near where ?? btw, BOON siew offer the spare key at wat price ar?

[nfs_unlimited]

hi bros/sis any1 know whether spec 2/spec 3 pillion hold bar (or u bar) can install on spec 1? thanks.