[Discussion] Exhaust Systems - BlueFlame

[thrasher]

u know i was wondering, im not on any aftermarket cans right now, still on stock cans and header. i lowered my forks to the max, and on good riding times and proper control i can clear humps easily with pillion (excluding jb custom humps and sg custom humps).. so WHEN i change to BF endcan... and hopefully SS headers, do i have to set my forks back to standard setting again? cos from what i know, the headers are much lower am i correct? am sure going to miss the aggressive posture of riding anyways, what SS 1 piece headers are out there asides from PB1 header? and how much?

[Royeight]

I would go for the fully welded. If you buy and not to your liking can exchange wif me... I top you up.

 

:)

 

Any idea 4-2-1 or 4-1 sounds best with blueflame cans? Hand getting itchy on it

[KerplunkZ]

u know i was wondering, im not on any aftermarket cans right now, still on stock cans and header. i lowered my forks to the max, and on good riding times and proper control i can clear humps easily with pillion (excluding jb custom humps and sg custom humps).. so WHEN i change to BF endcan... and hopefully SS headers, do i have to set my forks back to standard setting again? cos from what i know, the headers are much lower am i correct? am sure going to miss the aggressive posture of riding anyways, what SS 1 piece headers are out there asides from PB1 header? and how much?

 

Hodaka header. $420. Get from rabbit if he still have it

[KerplunkZ]

Any idea 4-2-1 or 4-1 sounds best with blueflame cans? Hand getting itchy on it

 

I vote for 4-1.

[thrasher]

obviously 4-1? wah how many hodaka header he have

[KerplunkZ]

Republic also sell cheaper then motorworld, but need to order unless they got ready stock. Last i ordered and waited 1 mth. It nvr come, so i get other stuff and buy pb1 header from a forumer and mod it at sengkwang to fit my bf.

[Nasser]

Rabbit quote me 450 with installation.. But he said its not hodaka brand..

[Fazli]

4-1 headers definitely sounds gd with BF cans... I can vouch for that cos I'm on 4-1 SS headers.

[pokakia]

Hi fazli !

Don't mind me asking a few noob questions.

1. Does blueflame has it's own full system ?

2. How much does the SS header cost ?(is it legal ?)

3. Does stock VTEC-1 header fit BF endcans ?

 

Thanks in advance !

[KerplunkZ]

Hi fazli !

Don't mind me asking a few noob questions.

1. Does blueflame has it's own full system ?

2. How much does the SS header cost ?(is it legal ?)

3. Does stock VTEC-1 header fit BF endcans ?

 

Thanks in advance !

 

The answer for Question 3 is Yes.

[Fazli]

Hi fazli !

Don't mind me asking a few noob questions.

1. Does blueflame has it's own full system ?

2. How much does the SS header cost ?(is it legal ?)

3. Does stock VTEC-1 header fit BF endcans ?

 

Thanks in advance !

 

Answer:

 

1. BlueFlame does not have full system to my knowledge to date.

2. Rabbit is selling the fully welded 4-1 SS headers for $450. Spring slip joint ones are cheaper. Contact him for these.

3. Any version of CB400 headers will fit your BlueFlame end can.

 

Cheers~! :)

[rocksteady]

Dropping by to say HI to all BF riderz, long time neva came in here

[thrasher]

i don't get it. theres a diff between SS fully welded and SS Slip joints?

 

Answer:

 

1. BlueFlame does not have full system to my knowledge to date.

2. Rabbit is selling the fully welded 4-1 SS headers for $450. Spring slip joint ones are cheaper. Contact him for these.

3. Any version of CB400 headers will fit your BlueFlame end can.

 

Cheers~! :)

[rocksteady]

i don't get it. theres a diff between SS fully welded and SS Slip joints?

 

Welded better bro, for slip-ons, air can escape

[Fazli]

Dropping by to say HI to all BF riderz, long time neva came in here

 

Woit~! Where you go? Long time never hear from you...

 

i don't get it. theres a diff between SS fully welded and SS Slip joints?

 

You slip in the joints, probability of leaking is there compared to a proper fully welded headers which have zero leak.

[pokakia]

Answer:

 

1. BlueFlame does not have full system to my knowledge to date.

2. Rabbit is selling the fully welded 4-1 SS headers for $450. Spring slip joint ones are cheaper. Contact him for these.

3. Any version of CB400 headers will fit your BlueFlame end can.

 

Cheers~! :)

 

Thanks bro !

By the way what is spring slip joint ?

And for the SS header by rabbit. SS is stainless steel right ? So it won't rust right ? And does the SS header looks nice and boost performance (or just purely for cosmetic).

 

Thanks alot bro !

[rocksteady]

Fazli did u received my fren request at fb

[Royeight]

I vote for 4-1.

 

obviously 4-1? wah how many hodaka header he have

 

4-1 headers definitely sounds gd with BF cans... I can vouch for that cos I'm on 4-1 SS headers.

 

Thanks for the reply bros Will be getting 4-1 SS header then.

 

Where can i find a good deal? Rabbit still have it?

 

Any lastly, anyone has fitted a 4-1 with blueflame cans on their S4? Any video clip to show?

[ayoasti]

me! me! me! but sry no video can meet up let u hear hehehe

wen vtec open....the throttle...like....NEVER ENDING superb! super niosy, super light, super power and super SUPERB! haha

[Nasser]

cheers to BLUEFLAME & 4-1 SS Header.. !!! hehe =)

[Fazli]

Anyone wans to do a flyby video of BF? Hehehe~!

[INREVO]

is it super 4 that u r refering to?

[Fazli]

Me? Yupz... Was thinking of doin a group of CB400 BF flyby...

[ayoasti]

ehhh bro that'll be cool! 1-by-1 open vtec or all open vtec together!

 

 

Me? Yupz... Was thinking of doin a group of CB400 BF flyby...

[ayoasti]

den again will be like moto gp, like 1-by-1 passing the grand stand area. rooaaarrrrr!!!

 

 

Me? Yupz... Was thinking of doin a group of CB400 BF flyby...