[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[driftbaker]

u guys meeting this sunday ah?? i wanna go but got exams... gota study... hopefully can arrange for another meet up aft my exams then i can learn more from u Ah pek!! hehe

[xiaobanz]

>>"80km/h should have.."

 

Errr..don't know leh unless everyone has then that's normal. But why would I design a bike that gives vibration regardless of performance range in speed..doesn't sound right leh. Mine do have leh

 

So much you did for your carbs..was there any reason in the first place? If you need to clean carbs..best can do without opening and dismantling anything in it.

 

Haha i think i phrase wrongly.. I mean b4 i open my carbs for washing there isn't any probs.. But then after i open, i find that my carbs have some fur balls in it.. Then when i checked my air filter, those furballs are huge inside..

 

For me is previously, i do not have vibrations when hit 80km/h but after washing.. The prob surface.. hai~

[Burnout69]

Hello all...thanks to Bleachu for sending me the list of scrap yards in Singapore where you guys might fimd what you need...chk it out..its very useful for those "needy".

 

Originally Posted by juS^riDe

http://www.thebikeyard.com.sg/

 

http://www.singaporebikes.com/forums...d.php?t=146855

Goota be careful at sungei kadut scrapyard.. chop people head with 1st hand prices..

[driftbaker]

sorry for this noob question ah.. all pb1 and VerS comes with mainstand issit?

[Ah Pek]

sorry for this noob question ah.. all pb1 and VerS comes with mainstand issit?

 

No..only PB1 originally has but however you can install 3rd party. There are local made ones and please check the quality of joints welding and tensile strength before deciding to install it. As for Vtec 1 among the Vtec..hear it cannot be install likely due to no mounting points or mid header exhaust displacement.

Edited April 18, 2009 by Ah Pek

[driftbaker]

No..only PB! originally has but however you can install 3rd party. There are local made ones and please check the quality of joints welding and tensile strength before deciding to install it. As for Vtec 1 among the Vtec..hear it cannot be install likely due to no mounting points or mid header exhaust displacement.

 

i c i c... now i know... learnt something new today!!!

 

side panels from other versions (eg, verS, vtec 1/2/3??) can fit on PB1??

[Ah Pek]

i c i c... now i know... learnt something new today!!!

 

side panels from other versions (eg, verS, vtec 1/2/3??) can fit on PB1??

 

Non vtec from 1995/6 PB1 and Ver "S/R" should be interchangeable..but with Vtec..no but among the Vtec themselves..it's another whole ball game among themselves. What are you trying to fit to..ur PB1?

[driftbaker]

Non vtec from 1995/6 PB1 and Ver "S/R" should be interchangeable..but with Vtec..no but among the Vtec themselves..it's another whole ball game among themselves. What are you trying to fit to..ur PB1?

 

i'm thinking of fitting original OEM side panels cos my current one is chrome ones. i'm thinking of making my whole bike back to black so wanna change back lo. but if it's not feasible, then i'll just stick to the chromed ones.. it's unique in its own way oso ma.. lol

[Ah Pek]

Heh Holugyi!...thank you so much for helping me out with grounding for two other fellow rider mannn! You can do for anyone here the next time ;0)

[Wizard]

Heh Holugyi!...thank you so much for helping me out with grounding for two other fellow rider mannn! You can do for anyone here the next time ;0)

 

Ah Pek! thanks for taking time off for us even though its a last minute request!

haha hope you feeling better now liao..

[Ah Pek]

;5321034']Ah Pek! thanks for taking time off for us even though its a last minute request!

haha hope you feeling better now liao..

 

I'm mannn!..thank you. Glad you happy wif what was done today and remember, your alternator coil. LOL!...now I know why your icon image has that red ring voltmeter..nice...nice!

[Wizard]

haha.. nice to hear that!

i just took off 2 wiring that is causing the resistor to be hot..

apparently my voltmeter shows higher voltage (although still inaccurate)

after grounding indeed throttle more responsive!

will pump full tank on tue and feed it with medicine from you..

[Fazli]

Sorry, Ah Pek haven't sleep ah?

[astroboy88]

Thk u so much for the bike grounding and ur X1R Ah pek!!...its really help our high age version-S bike...more smooth now.. bike feel lighter..may b want to get for my car also..Ke...ke..!!!

[lfc131]

Hi!.. I'm riding CB400 PB1 and My suspension is already very soft.. So which suspension is value for money and last very long?? showa, ohlins, YSS, Hyperpro, bitubo?? still searching... any recommendations?? anyone?..

[Sprint74]

Just service your original gantung, and maybe change the springs to Vtec one, the spring coils are nearer so feel stiffer, or try adding spacers ($60 for both sides). Can try K & T, look for clifford. Last I went there he got 2 vtec springs for sale (RED).Think he quoted 300+ to service and 400+ with the vtec springs + spacers (super stiff) ... Can check with him.. 67455463...He also told me Bitubo not really good for heavy riders like myself and not worth the money... Just my 2 cents worth

[rezasmess]

Hi!.. I'm riding CB400 PB1 and My suspension is already very soft.. So which suspension is value for money and last very long?? showa, ohlins, YSS, Hyperpro, bitubo?? still searching... any recommendations?? anyone?..

 

Try replenishing the nitrgen gas in the canister first...if still cannot then you might need to service the springs.

[lfc131]

yeap.. i myself am a heavy rider and the bike is already 13 yrs.. btw done everything already. service so many times already.

[Darkness19]

yeap.. i myself am a heavy rider and the bike is already 13 yrs.. btw done everything already. service so many times already.

 

if u planning to ride ur bike for quite some time,it is best to invest in a new set of suspension

[Baphomet]

guys i just change my oil to belray 10w40..and of cos added in the x1r frm ah pek.. is this brand good?

 

ah pek u free this few nites? need your help to do my lightings. thx

Edited April 20, 2009 by Baphomet

[Ah Pek]

guys i just change my oil to belray 10w40..and of cos added in the x1r frm ah pek.. is this brand good?

 

ah pek u free this few nites? need your help to do my lightings. thx

 

Belray..quite a name in the old days but with X-1R..you don't really need to spend on expensive oil. 10/40W is good for fairly new bike but if its older, get 20/50W if have, otherwise use viscosity enhancer to get the "W" more suitable.

 

What lights hah?

[Ah Pek]

yeap.. i myself am a heavy rider and the bike is already 13 yrs.. btw done everything already. service so many times already.

 

"..service so many times already"..your SHOWA? I only refurbish (rebuild) my once 9 years ago and still ok...but not "service". Check out David from Teck Thye..he's a specialist for this..for rebuild at $240 with extra spring spacer for better rebound rate throw in.

[Baphomet]

Belray..quite a name in the old days but with X-1R..you don't really need to spend on expensive oil. 10/40W is good for fairly new bike but if its older, get 20/50W if have, otherwise use viscosity enhancer to get the "W" more suitable.

 

What lights hah?

 

hmn...20/50w very cheap one leh.

 

the meter lights lor..last time tok to u b4 but very busy no time do...tml nite u free?

[Ah Pek]

hmn...20/50w very cheap one leh.

 

the meter lights lor..last time tok to u b4 but very busy no time do...tml nite u free?

 

Bulb replacement or led strip...have to let me know bekuz I don't stock anything. Wendesday evening should be ok.

[Baphomet]

Bulb replacement or led strip...have to let me know bekuz I don't stock anything. Wendesday evening should be ok.

 

hmn..wats the cost ? which one better?