[Group] Super Four Non-VTEC Family: PB1 VerR & VerS

[hanxx]

bro, confirmed already i checked and for ver s,

Vehicle Model: CB400F3V

[Ah Pek]

The Vehicle Model : CB 400 F3VJ

 

CONFIRMED Ver "S".

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

[Ah Pek]

hey ah pek!

if i want to top up coolent, where will be gd to get a reasonably gd coolent?

how much will it cost me in average?

 

anyway, i found someone willing to give me a stock s4 headlight at FOC, but rusty, do u think can do a respray for it?

 

thanks in adv:thumb:

 

Not sure what you meant by "top up coolant..average cost and good coolant"? If just top up, can get from any kiosk the premixed ones and just pour into the reserve tank. Unless, you want to drain the old one and refilled..that's different..an at $25.

 

"do u think can do a respray for it?"..sorry, your question is not clear..are you asking me to do it or can you respray the headlamp? Of course you can respray but the prep takes quite a bit of work and paint spraying it need to do "baking" otehrwise, the paint work would crack in a few months under sun and rain.

 

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

[Guest JamieJamie]

dude go get spec3 headlight shiny one from ahboy.. chiong one.. $60 shiny and white bright bulb some more... Tp magnet

[Black Jet]

Hi Guyz, is anyone know how much to change clutch plate?any motor shop is good and not so expansive?coz my pb1 i try to change the gear very hard and not smooth...pls advise..Thank....

[Ah Pek]

Hi Guyz, is anyone know how much to change clutch plate?any motor shop is good and not so expansive?coz my pb1 i try to change the gear very hard and not smooth...pls advise..Thank....

 

Why do you think its the clutch plates? Have you tried adjusting your clutch cable? It may be stretched and elongated too. Why don't you join us this Sunday at 9:45 to 10:15am at AMK Ave 10 Tech Ghee Square Blk 409. Can have a look at it or adjust fo you.

 

Btw..one clutch plate cost $11 and may be more now due to the yen increased..there are total 6 pieces.

 

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

[Black Jet]

Why do you think its the clutch plates? Have you tried adjusting your clutch cable? It may be stretched and elongated too. Why don't you join us this Sunday at 9:45 to 10:15am at AMK Ave 10 Tech Ghee Square Blk 409. Can have a look at it or adjust fo you.

 

Btw..one clutch plate cost $11 and may be more now due to the yen increased..there are total 6 pieces.

 

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

 

Ok Bro, can so see you guyz sunday ok...

[Black Jet]

Congratulation! Yah...no power cut. A good one can give you top speed till your meter runs dead at 190 km/hr. FC is subjective..depend on riding style and bike condition.

 

Why don't join us on Sunday at AMK Ave 10 Blk 409 Teck Ghee Square (meeting time 9.45 to 10.15 am) for bike talk over breakfast. There are ppl like yourself sharing their experiences.

 

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

 

Bro, is it easy to find this place?

[Ah Pek]

Bro, is it easy to find this place?

 

Funny that you should asked that..hmmmm? Its you finding the place not me..LOL! Don't you have access to a road directory or something? AMK Ave 10 is near NTUC Hub MRT Station..just follow the main road (AMK Ave 3) towards Yio Chu Kang from there..about 300m..along on your right, tere is a turning and that's AMK Ave 10.

 

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

[hanxx]

Not sure what you meant by "top up coolant..average cost and good coolant"? If just top up, can get from any kiosk the premixed ones and just pour into the reserve tank. Unless, you want to drain the old one and refilled..that's different..an at $25.

 

"do u think can do a respray for it?"..sorry, your question is not clear..are you asking me to do it or can you respray the headlamp? Of course you can respray but the prep takes quite a bit of work and paint spraying it need to do "baking" otehrwise, the paint work would crack in a few months under sun and rain.

 

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

 

heyy ah pek, i meant refilling coolent.

 

regarding the headlight, i meant spraying my own if i can, wouldnt want to trouble u also.haha.

 

thanks alot anyway:thumb:

[xiaobanz]

Hi ah pek, the bike shop that time you bring me too.. What is the name of the shop again and also wat time it opens.. Immediately after my exams i will go there check my coolent pump + clutch plates.

 

I remember is go your place, exit AMK Ave 3, then after the bridge keep left and exit the filter lane to the industrial park. Then b4 the traffic light turn in after that turn right..lolz

[Ah Pek]

Hi ah pek, the bike shop that time you bring me too.. What is the name of the shop again and also wat time it opens.. Immediately after my exams i will go there check my coolent pump + clutch plates.

 

I remember is go your place, exit AMK Ave 3, then after the bridge keep left and exit the filter lane to the industrial park. Then b4 the traffic light turn in after that turn right..lolz

 

Ban Hong..AMK Ave 3..when see Caltex Station, turn before the lane into the Industrial park..third lane and u turn out the other way..should see it.

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

[Guest JamieJamie]

how much fc u all getting? i doubt my can hit 320 with reserve ? ~_~ how to improve fc? any tips??

[LordMemy]

hey ah pek thanks for just now. dunno how come it last 4 hours. haha but sure wasnt boring. will look forward to the sunday sessions and the X1-r.

[xiaobanz]

Ban Hong..AMK Ave 3..when see Caltex Station, turn before the lane into the Industrial park..third lane and u turn out the other way..should see it.

 

Ah pek juz wanna ask where can i get the coolant you always use..? Cos if need to change pump or thermostat usually need to refill coolant. Then wanna bring 1 bottle there juz in case.. Or if best i buy from you another bottle then make my way there.. But of cos dun wanna mafan you too much..

[xiaobanz]

how much fc u all getting? i doubt my can hit 320 with reserve ? ~_~ how to improve fc? any tips??

 

Check tire pressure, less sudden burst of throttle, good plugs, healthy EO, smooth engine (good maintenance), etc. There are a lot of things to improve FC. These are the more basic ones..

[ezrider_ph]

Hi Guyz, is anyone know how much to change clutch plate?any motor shop is good and not so expansive?coz my pb1 i try to change the gear very hard and not smooth...pls advise..Thank....

 

maybe sir you have a worn-out motor oil (change it) or

too much motor oil is used (drained it & put the exact amount 3liters if newlyu change oil filter or 2.8liters if not) or

the clutch plates are rusted (for being stock for a long time just removed it & have it sanded by a fine sandpaper)...

[Black Jet]

maybe sir you have a worn-out motor oil (change it) or

too much motor oil is used (drained it & put the exact amount 3liters if newlyu change oil filter or 2.8liters if not) or

the clutch plates are rusted (for being stock for a long time just removed it & have it sanded by a fine sandpaper)...

 

Thank Bro, today i have change the engine, oil plug, new set of clutch plate, and some other staff coz me abt $300 well no choice. Thank for the advise..Cheers

[Ah Pek]

Ah pek juz wanna ask where can i get the coolant you always use..? Cos if need to change pump or thermostat usually need to refill coolant. Then wanna bring 1 bottle there juz in case.. Or if best i buy from you another bottle then make my way there.. But of cos dun wanna mafan you too much..

 

You can use any type of coolant and not necessary to be the same type. You can get it at AMK NTUC Hub or most Esso kiosk which is cheaper like Ye say. Its call "DIAX".

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

[Ah Pek]

Thank Bro, today i have change the engine, oil plug, new set of clutch plate, and some other staff coz me abt $300 well no choice. Thank for the advise..Cheers

 

So...after spending the $300, what do you learn from it?...was the clutch plates giving problem to your original question that it was hard in shifting gears?

 

Or could it just be the clutch cable stretched and improperly adjusted? If this was so, would the mech just told you so?

 

Looks like we never know.

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

[jeyboy05]

Hey Peeps,

Are you guys meeting`up this Sunday( 14 Jun 09)?

[astroboy88]

Hope tomolo beatifill Sunday!!! No rain!!! the more we together!!!

[xiaobanz]

Haha today juz rained super heavily..

[Ah Pek]

Hey Peeps,

Are you guys meeting`up this Sunday( 14 Jun 09)?

 

Yes..its on..come on down

 

 

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

[Black Jet]

So...after spending the $300, what do you learn from it?...was the clutch plates giving problem to your original question that it was hard in shifting gears?

 

Or could it just be the clutch cable stretched and improperly adjusted? If this was so, would the mech just told you so?

 

Looks like we never know.

 

http://www.SiteVacuum.com/publisher/GoogleSearchIconShadow.gifhttp://www.SiteVacuum.com/publisher/SuperSearchIconShadow.gif

 

Ya man, still abit better than before.well i still got to change the clutch plate also. coz this previous own never take care of the bike and engine oil never even change and told me just change 2 month ago...the oil was dam dark in plug was rusty on the tip...