BMW Motorcycles

[axl]

1. where to get them eg Wunderlich 40mm riser and towards the rider

2. If I install the above , do I need to reroute the cables? Anyone have experience with it?

[JrCherish]

Does anyone know where i could get touratech items?.

[Chow]

Hi all

i m a new owner of a used F700GS.

I m having trouble trying to pump the rear tyre at SPC today, the pump nozzle is too long and the wheel rim is obstructing, just cannot fit into the valve.

How do you guys do it ?

Any advise ?

 

[tszkit]

Hi all

i m a new owner of a used F700GS.

I m having trouble trying to pump the rear tyre at SPC today, the pump nozzle is too long and the wheel rim is obstructing, just cannot fit into the valve.

How do you guys do it ?

Any advise ?

 

 

I got the same problem with my GSA front tyre.

Just go Harley buy the Valve Stem Extension.

Its recommend by KIM pml.

[Chow]

I got the same problem with my GSA front tyre.

Just go Harley buy the Valve Stem Extension.

Its recommend by KIM pml.

 

Hi Bro, yes, think I will have to get an extension.... thanks!

https://www.qoo10.sg/item/AUTO-CAR-MOTORCYCLE-BRASS-TIRE-TYRE-VALVE-ADAPTER-90-DEGREE-ANGLE/550160879?banner_no=1305330

[cbkooky]

I was looking around and came across an r1200rt. Milleage arnd 60K+. Whats the servicing cost range are we looking at if the servicing is continued by PML? I read somewhere their labour and etc adds up. Thanks.

 

Sent from my SM-N950F using Tapatalk

[mySTic4256]

Dear frens, need some help here.

 

Are there any replacement parts to the stock foglight that is found on the R1200 GSA? my housing broke and i can't seem to find replacement parts to this

Another issue is the repairs on my box lockset. somehow, the lockset is a little bent and cannot be closed properly. Are there any workshops that will repair this?

 

Thanks so much in advance.

Cheers!!!

[kano]

Upzzzz for BMW

[YEN96]

For good car motor insurance or bikes or commercial van lorry trucks.

 

Can try contact call whatsapp Terence at 936-TWO-335-TWO

 

Save his number u may need it

[kruz99]

Dear frens, need some help here.

 

Are there any replacement parts to the stock foglight that is found on the R1200 GSA? my housing broke and i can't seem to find replacement parts to this

Another issue is the repairs on my box lockset. somehow, the lockset is a little bent and cannot be closed properly. Are there any workshops that will repair this?

 

Thanks so much in advance.

Cheers!!!

 

Change into aftermarket foglight already....original not very bright.

else those china made look like original are equally good

[quack11]

Hi Folks, any workshop to recommend for BMW servicing or parts replacement ? Just brought a second hand BMW K1200R. So thought of doing a servicing and change the brakes pad etc...

[736cc]

On 7/18/2020 at 1:49 PM, quack11 said:

Hi Folks, any workshop to recommend for BMW servicing or parts replacement ? Just brought a second hand BMW K1200R. So thought of doing a servicing and change the brakes pad etc...

Cheapest and good will be bikeworkz 

[Desmonddd]

Hi all, 

Could Any1 advise if the orange point is the remaining of break pads right? 

Thanks in advance! 

 

[JrCherish]

Brake pad, can go motoworld to change SBS.. not costly and braking power is there. 

[obverse]

Hello! 
Lurker here. My 2011 GS1200 triple-black is about to reach its COE and though I use it; I'm grabbing more and more these days.

I havent renewed/scrapped a bike before. If I scrap it; by taking it to a scrapyard; then who benefits from its sale overseas? Is it the dealer; or LTA?

Would a 2011 GS be sold; or broken up?

Thanks for the info

[SBF]

5 hours ago, obverse said:

Hello! 
Lurker here. My 2011 GS1200 triple-black is about to reach its COE and though I use it; I'm grabbing more and more these days.

I havent renewed/scrapped a bike before. If I scrap it; by taking it to a scrapyard; then who benefits from its sale overseas? Is it the dealer; or LTA?

Would a 2011 GS be sold; or broken up?

Thanks for the info

2011 GS most likely dealer will renew COE and re-sell again.

@obverse You have 3 options..

1) Bring to scrap yard/exporter on your own, you have to settle the paperwork, probably get a few hundred $ more.

2) Sell or trade-in to dealer, just drop off, collect cheque from them and go. More straightforward but they will take some margin for their profits. The dealer might then scrap/export/resell depending on the market and quotes that they get.

If you go to bike shop, also possible to trade in for a new bike.

3) Sell the motorcycle privately via Carousell or SBF Bike Mart - www.sgbikes.com/classifieds

You'll probably get the most $ from selling yourself but there are a lot of ADV bikes on the market due to borders being closed.

Good luck!

 

[obverse]

19 hours ago, SBF said:

2011 GS most likely dealer will renew COE and re-sell again.

@obverse You have 3 options..

1) Bring to scrap yard/exporter on your own, you have to settle the paperwork, probably get a few hundred $ more.

2) Sell or trade-in to dealer, just drop off, collect cheque from them and go. More straightforward but they will take some margin for their profits. The dealer might then scrap/export/resell depending on the market and quotes that they get.

If you go to bike shop, also possible to trade in for a new bike.

3) Sell the motorcycle privately via Carousell or SBF Bike Mart - www.sgbikes.com/classifieds

You'll probably get the most $ from selling yourself but there are a lot of ADV bikes on the market due to borders being closed.

Good luck!

 

Thank you  - this is a great reply.