SBF Runners Cafe 2008 - FXR/VXR/RST

[spy622]

tis is the part i haf been meddling with for the past few weeks.. now i haf three springs in my werkshop. the stock 1s(a), the 1 tat come with multivar(b), and the racing springs©.. so far tat i notice, b and c haf the same tension or maybe slight diff but c of a greater length, a and b, same length but diff tension.. tried all of them with 15 grm rollers.

i shd say c has a lot of pick up but maybe due to my engine not mod in any way, it din reach to its full potential(maybe). in the end it revs too high to get to my desired speed..

b pick up slightly poorer but achieve better top end and lastly and still using it, a, slightly poorer pick up than b, but can maintain a 'more comfortable' rpm for my desired speed. since i use the e way more often so i chose 'a' springs for my setup.

 

if u r using the malossi multivar, then use the 1 suppied by the malossi multivar set then u wont be wrong

[bongstar88]

used.. trying mah see which is good .. so far stock spring is good... still looking at it.. and training myself to open up transmission box .. hehehe.. the one supplied is definately good. mix match to suit wat i need for everyday use ..

[FinG]

GPR so far best lol,sorry to LVER

[mohgui]

used.. trying mah see which is good .. so far stock spring is good... still looking at it.. and training myself to open up transmission box .. hehehe.. the one supplied is definately good. mix match to suit wat i need for everyday use ..

 

eh bro, you got werkshop ar? cool... can drop by some time to meddle my ride too. need to learn a thing or two so that can DIY more instead of going to motordiam.

[mohgui]

how much mohgui?

 

was quoted $630 by Kenny. cheap or not cheap... you decide.

 

it looks like this... but with full carbon-fibre design.

 

http://www.gpr.it/scheda.php?idcatveicolo=2&idveicolo=44

[TS1]

was quoted $630 by Kenny. cheap or not cheap... you decide.

 

it looks like this... but with full carbon-fibre design.

 

http://www.gpr.it/scheda.php?idcatveicolo=2&idveicolo=44

 

dude.. is it in fuLL sys or comes in end can onLy?

[ahboy535]

wah the new gpr can is like copying lv less logo and design only...copycat haha

[ahboy535]

anyways i jus change small windshield and acerbis handguard and new sliding roller from dr pulley...heeheehee...now looks and sound a little like scrambler too haha

[ahboy535]

changing to small wind shield reli dropped my top by 3km/h... but bike looks nicer though

[TS1]

wah the new gpr can is like copying lv less logo and design only...copycat haha

 

the design's been around for a Long time.. its just that previousLy it was made onLy for 50 to 125 cc euro scoots.. but given the reputation that gpr pipes r Lighter in materiaL.. its worth a try.. with the carbon fiber Look i think it Looks much cooLer as weLL.

[TS1]

anyways i jus change small windshield and acerbis handguard and new sliding roller from dr pulley...heeheehee...now looks and sound a little like scrambler too haha

 

changing to small wind shield reli dropped my top by 3km/h... but bike looks nicer though

 

maybe if u took out that handguard.. u might get back that 3km/h up again.. haha.

[mohgui]

dude.. is it in fuLL sys or comes in end can onLy?

 

i believe it's the full system. don't think Future sells half baked items...

 

my current GPR pipe (previous design)... got it full system from them too.

[TS1]

i believe it's the full system. don't think Future sells half baked items...

 

my current GPR pipe (previous design)... got it full system from them too.

 

great.. thanks brah.

[lilshah83]

i stil lurve my LV!

[bongstar88]

tats wat i wanted to do oso, bring some kakis to diy.. but recently my big boss install camera, wah cover all angle .. so weekend is out.. i do only during lunch time loh .. if only i got a spare engine(wishful tots) ..

[ViXeR]

guys how do u remedy this prob?

my 05' vxr runner tank cover keeps popping out.

any idea how to make it 'tight' again?

keeps coming out everytime my bike bumps...

[ViXeR]

oh i dun mean the screw tank cap...

it's the cover that u have to push the key to open...

[ardemz]

oh i dun mean the screw tank cap...

it's the cover that u have to push the key to open...

 

Juz got mine fixed by the mechanic 2 days back. He removed a screw near the tank cap and then loosened the front cover to reach in with a screw driver to tighten some spring mechanism for the cover or something. Can ask the mechanic do for u for free when u pop by for servicing or something.

[ViXeR]

Juz got mine fixed by the mechanic 2 days back. He removed a screw near the tank cap and then loosened the front cover to reach in with a screw driver to tighten some spring mechanism for the cover or something. Can ask the mechanic do for u for free when u pop by for servicing or something.

 

eh.. but urs is the new model.. same is it?

anyway thanks for the help. will pop by the workshop today...

i think like the spring is too stiff or the locking mechanism to short to

clip onto the hole like dat...

[ragey]

anyways i jus change small windshield and acerbis handguard and new sliding roller from dr pulley...heeheehee...now looks and sound a little like scrambler too haha

 

dude..where u got that handguard? is it available at sun rise? and how much it costs?

thx..

[FinG]

dam...the runneriders are getting lazy ot have outing

[bongstar88]

u organise ar..

[spy622]

i stil lurve my LV!

 

 

I love my Arrow :lol:

[john_jenin5]

anybody got try to fix heaxagon redvalve at your runner ??

[mohgui]

dam...the runneriders are getting lazy ot have outing

 

yah... tua-pui kia not around anymore...