[Group] YAMAHA Fazer

[E.M.F]

That bike belong to contructicon.......

Yesterday just some BIG discussion. nothing happening...

 

Oic ic.... i tot there was a sicssors, paper, stone battle goin on coz everyone was so close to each other.

[jairz]

Oic ic.... i tot there was a sicssors, paper, stone battle goin on coz everyone was so close to each other.

 

so many ppl stand close together.. i think shud be orh ar bei ya song!

[racingter]

sat wan bo?

 

sat..working man..haiz

[skateboy]

Hi all...

 

my 07 FZ1S is experiencing erratic firing. a couple of times hard to start, sometimes moving off like suddenly the feel of the power is not normal. sometimes ok, sometimes not ok.

 

check if anybody had this encounter b4? i do heard of yamaha bikes have the TPS fault n at times, fuel pump defective. can anybody enlighten me? thanks in advance.

[farish]

@ Yatz

 

Recover soon bro!! Take more meat and milk. and Calcium..will help with the recovery

[Yatz86]

@ Yatz

 

Recover soon bro!! Take more meat and milk. and Calcium..will help with the recovery

 

Thx bro!

 

I've been getting loads and loads of chocolates from my nice peers. Making me fat sia =(

[ZellGlory]

Hi all...

 

my 07 FZ1S is experiencing erratic firing. a couple of times hard to start, sometimes moving off like suddenly the feel of the power is not normal. sometimes ok, sometimes not ok.

 

check if anybody had this encounter b4? i do heard of yamaha bikes have the TPS fault n at times, fuel pump defective. can anybody enlighten me? thanks in advance.

 

U can try doing the tps diagnostic check to double confirm the stock settings are fine to dismiss any tps issue

[jairz]

@ Yatz

 

Recover soon bro!! Take more meat and milk. and Calcium..will help with the recovery

 

sounds really like a gym instructor's advice. hmmm... :angel:PEACE

[GuiNNeSS]

Hi guys,

 

Anyone know the URL for the darkside forums?

 

Cpu died, so lost all my links...

[PaLmEr]

Hi all...

 

my 07 FZ1S is experiencing erratic firing. a couple of times hard to start, sometimes moving off like suddenly the feel of the power is not normal. sometimes ok, sometimes not ok.

 

check if anybody had this encounter b4? i do heard of yamaha bikes have the TPS fault n at times, fuel pump defective. can anybody enlighten me? thanks in advance.

 

your plug coils are acting up.

[s4dreamer]

yup.. eventful day for me... first time riding into m'sia den consecutive 2 days ride in, cos after mid nite le mah.

 

jus hope our lady rider will get well soon and overcome her phobia...

 

one thing to mention.. Pichudot looks funny while riding the small lamb. oversize creature on a small lamb. WHAHHAHAHAHA!!

 

Yes, I had a tankslapping incident before (can be found in my blog) and it was sure scary. And I just want to tell her... You can overcome your phobia for sure! I've done mine and never looked back.

 

And kudos to Pichudot in riding her bike back!

[James996]

Hi all...

 

my 07 FZ1S is experiencing erratic firing. a couple of times hard to start, sometimes moving off like suddenly the feel of the power is not normal. sometimes ok, sometimes not ok.

 

check if anybody had this encounter b4? i do heard of yamaha bikes have the TPS fault n at times, fuel pump defective. can anybody enlighten me? thanks in advance.

 

Spark plug coils failure is another well known FZ1 gen2 problem too.

 

Any idea how much it costs to change the time belt n cam tensioner for fz1s ?

 

A few hundreds, you can do a valve clearance together.

 

Hi guys,

 

Anyone know the URL for the darkside forums?

 

Cpu died, so lost all my links...

 

Meow, google and type sgfazer,it's the first link of the search.

[skateboy]

U can try doing the tps diagnostic check to double confirm the stock settings are fine to dismiss any tps issue

ic... this one have to send to shop to do the check?

 

your plug coils are acting up.

so wat r the possible corrective measures i can do?

 

Spark plug coils failure is another well known FZ1 gen2 problem too.

icic... so wat r the well known prob for gen2 that i shd look out for? cos i got a 2nd hand 07 model, the tendency of the prob popping out is higher compared to a new machine.

[catzilla]

Yo just installed my tank bra at MoneyWorld ytd evening. But just checking with u guys coz when i see mine installed around the fuel cap circular cut out area it seems like got a crease/buldge jutting up. Asked the mech he say will soften and sit into shape after a while. Is it true? I scared its sloppy work.

[maxxmadness]

Yo just installed my tank bra at MoneyWorld ytd evening. But just checking with u guys coz when i see mine installed around the fuel cap circular cut out area it seems like got a crease/buldge jutting up. Asked the mech he say will soften and sit into shape after a while. Is it true? I scared its sloppy work.

 

with time it will set in the shape of your tank, in the meantime, ride more worry less..

[maxxmadness]

Any idea how much it costs to change the time belt n cam tensioner for fz1s ?

 

i may be wrong but i think it should be running on timing chain?

 

like what james suggested, do the valve clearance check at the same time.

 

but have your bike mileage reach at least 60 000km? I did mine at 60 000km and have the intention to change the timing chain, but when my mechanics removed it, i only change the tensioner and nothing else, the valve clearance were still okay...what i am saying is i know the owner's manual say to do the valve clearance check at 40 000km...that is a little premature and kaisu

 

anybody going in 2nd link for petrol? later..?call me if u wanted to join..

 

wah bro i went in at around 5pm, didn't see your post else i sure banana you

Edited January 6, 2010 by maxxmadness

[hairisg76]

@ Yatz

 

Recover soon bro!! Take more meat and milk. and Calcium..will help with the recovery

 

 

hmmmm... sounds like he needs a cow.

[jairz]

i may be wrong but i think it should be running on timing chain?

 

like what james suggested, do the valve clearance check at the same time.

 

but have your bike mileage reach at least 60 000km? I did mine at 60 000km and have the intention to change the timing chain, but when my mechanics removed it, i only change the tensioner and nothing else, the valve clearance were still okay...what i am saying is i know the owner's manual say to do the valve clearance check at 40 000km...that is a little premature and kaisu

 

 

 

wah bro i went in at around 5pm, didn't see your post else i sure banana you

 

that time i was chatting wit the mechanic at HLC while doing my 2nd servicing, there was one FZ1 there wanting to get a valve clearance but the mechanic was saying if the engine doesnt give u any funny feeling, don do valve clearance even if u hit the mileage reccomended by the manual. its the mechanic advice to me if in future i hit valve clearance mileage.

[GuiNNeSS]

Thanks James, I google Singapore Fazer, no wonder cannot find lah, haha.

 

I think I did my valve clearance, timing chain and tensioner at around 47000 km. There's a saying "If it's not broken..." Then again, no harm letting the mechanic check right? (other than damage to wallet)

 

Oh btw, I'm a gen 2 rider as well, long time lurker. Now more free at work so can surf forums, haha.

[Speedpass]

i may be wrong but i think it should be running on timing chain?

 

like what james suggested, do the valve clearance check at the same time.

 

but have your bike mileage reach at least 60 000km? I did mine at 60 000km and have the intention to change the timing chain, but when my mechanics removed it, i only change the tensioner and nothing else, the valve clearance were still okay...what i am saying is i know the owner's manual say to do the valve clearance check at 40 000km...that is a little premature and kaisu

 

 

 

wah bro i went in at around 5pm, didn't see your post else i sure banana you

 

Thanx guys , my mileage currently onli 40k . Maybe bring to HL n let kenny check it out 1st.

[heyou]

Going to collect my tankbra from MW later in the evening.. After waiting for more than 3 months and countless phone call to check about my BRA

[James996]

icic... so wat r the well known prob for gen2 that i shd look out for? cos i got a 2nd hand 07 model, the tendency of the prob popping out is higher compared to a new machine.

 

Hmm...Let's see...Main frame crack, TPS, batt dont last, spark plug coils failure, water will slip into tank, fuel pump failure.

[James996]

Thanks James, I google Singapore Fazer, no wonder cannot find lah, haha.

 

I think I did my valve clearance, timing chain and tensioner at around 47000 km. There's a saying "If it's not broken..." Then again, no harm letting the mechanic check right? (other than damage to wallet)

 

Oh btw, I'm a gen 2 rider as well, long time lurker. Now more free at work so can surf forums, haha.

 

No problem,meow..

 

I will never forget your first oversea trip with us...The white T-shirt...Hohoho.

[jairz]

Going to collect my tankbra from MW later in the evening.. After waiting for more than 3 months and countless phone call to check about my BRA

 

should i go down and collect it today too... wat time you be going?

[DeusExMachina]

Hmm...Let's see...Main frame crack, TPS, batt dont last, spark plug coils failure, water will slip into tank, fuel pump failure.

 

Yeah yeah .....

 

Slow rev-up for a 1000cc, 06 model got abrupt throttle response, etc etc...

 

and the list goes on.