Adiva ADtre owner's thread

[ben1112]

Seeking advice. Anyone knows how to reset 'Service' icon on the dashboard? How was it done on the AD 200?

[advia89]

For those whom require the technical info as how to reset/clear the "service" icon.

 

1. Turn the key to 'swith on' (but don't press the ignition)

2. IMMEDIATELY press the switch which is on the top of the throttle on the right handle (just as u would do to reset the odometre/clock settings - but this time hold on to it all the way for couple of seconds until the blinking readings have stopped). You will eventually see that the 'service' icon disappear from the LCD meter panel.

Please refer to photo shown the said switches

Edited September 26, 2013 by advia89

[ben1112]

For those whom require the technical info as how to reset/clear the "service" icon.

 

1. Turn the key to 'swith on' (but don't press the ignition)

2. IMMEDIATELY press the switch which is on the top of the throttle[ATTACH=CONFIG]289210[/ATTACH] on the right handle (just as u would do to reset the odometre/clock settings - but this time hold on to it all the way for couple of seconds until the blinking readings have stopped). You will eventually see that the 'service' icon disappear from the LCD meter panel.

Please refer to photo shown the said switches

[ATTACH=CONFIG]289211[/ATTACH]

 

Thanks bro. That was really helpful.

[Landwaster]

[ATTACH=CONFIG]289190[/ATTACH][ATTACH=CONFIG]289194[/ATTACH][ATTACH=CONFIG]289195[/ATTACH]

 

Attached back on the bike. Trimmed the plastic abit more to ensure no interference.

 

Note: You can see from the muddy water stain that actually water is splashed quite near the edge and will be flung into rider area easily.

 

Great job there! Can please share the dimensions of the mudflaps?

Thanks.

[ben1112]

 

The dimensions.

[advia89]

Thanks bro. That was really helpful.

 

Don't mention as just a small part of info sharing.....nonetheless appreciate and thanks you and Andre for the contribution on the AD3...

 

Noted that you have added on the mud flaps which shall minimize the water being hurl by the 2 front tyres.....

 

However as apparently the main culprit is the rainwater blown by the wind, flowing into and shall wet the rider and pillion....

 

I think we have found a way to eliminate or minimize the rider from getting wet by the rainwater which importantly, this improvising did not incur huge cost or massive modify work......

 

We have put the "improvise" AD3 in today's heavy rain fall test and the result was quite impressive....

 

intent to run a few more test to conclude our test report which could be share if there are interested Advia3 riders and owners.....

Edited September 26, 2013 by advia89

[ben1112]

Don't mention as just a small part of info sharing.....nonetheless appreciate and thanks you and Andre for the contribution on the AD3...

 

Noted that you have added on the mud flaps which shall minimize the water being hurl by the 2 front tyres.....

 

However as apparently the main culprit is the rainwater blown by the wind, flowing into and shall wet the rider and pillion....

 

I think we have found a way to eliminate or minimize the rider from getting wet by the rainwater which importantly, this improvising did not incur huge cost or massive modify work......

 

We have put the "improvise" AD3 in today's heavy rain fall test and the result was quite impressive....

 

intent to run a few more test to conclude our test report which could be share if there are interested Advia3 riders and owners.....

 

Look forward to your sharing!

[Landwaster]

[ATTACH=CONFIG]289231[/ATTACH]

 

The dimensions.

 

Thanks, man. Just ordered a pair.

 

Andre, think the item on eBay is this.

 

http://www.ebay.com/itm/360673010014?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

[ben1112]

Thanks, man. Just ordered a pair.

 

Andre, think the item on eBay is this.

 

http://www.ebay.com/itm/360673010014?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

 

Yes correct. Opps I accidentally overwrite the link when i pasted the picture. Sorry.

[ben1112]

One of the things that the mudflap improved was water spray hitting pillion foot and exhaust area. There is a construction site near my workplace and often i pass through the muddy water. It becomes very clear where the water spray hits and then evaporate leaving the mud stains behind.

[Landwaster]

One of the things that the mudflap improved was water spray hitting pillion foot and exhaust area. There is a construction site near my workplace and often i pass through the muddy water. It becomes very clear where the water spray hits and then evaporate leaving the mud stains behind.

 

Good to hear that. Went pass some wet roads and already felt light spray on my feet at the moment.

Can't wait for the mudflaps to arrive.

[cayennurff]

awww man, keep seeing so many post on the bike, can't wait for my dad to get his

so excited.

[ben1112]

awww man, keep seeing so many post on the bike, can't wait for my dad to get his

so excited.

 

Then why not get one yourself too?

[cayennurff]

Then why not get one yourself too?

 

lol! my dad booked with the early bird price. It seems to be taking forever.

[advia89]

The boss of Mah Pte is seen at the Advia booth, in one of the bikes fair.......

 

[ben1112]

Can I check with you guys how much mileage have you hit?

[sazman]

lol! my dad booked with the early bird price. It seems to be taking forever.

 

Should be getting soon... The new shipment has arrived.

[ben1112]

Should be getting soon... The new shipment has arrived.

 

Sazman, yours too?

[sazman]

Sazman, yours too?

Yup!

[ben1112]

Yup!

 

Yes la... Our numbers are growing!

[ben1112]

Hi all Adiva ADtre owners-to-be, let's report in here with your nick, color and cc of your AD3 which you have booked. Hopefully can facilitate future meet-ups and share knowledge on the bike.

 

1.Ben1112 - Matte black/300cc

2.Andre - White/ 300cc

3.Landwaster -

4.Sazman -

5.cayennurff -

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

 

Landwaster, Sazman and Cayennuff pls update thanks!

[Landwaster]

Updated

 

1.Ben1112 - Matte black/300cc

2.Andre - White/ 300cc

3.Landwaster - Matte black/300cc

4.Sazman -

5.cayennurff -

[cayennurff]

Should be getting soon... The new shipment has arrived.

 

you get from MAH? they call you already?

what colour you getting ? 300/200?

[Andre]

...................

However as apparently the main culprit is the rainwater blown by the wind, flowing into and shall wet the rider and pillion....

 

I think we have found a way to eliminate or minimize the rider from getting wet by the rainwater which importantly, this improvising did not incur huge cost or massive modify work......

 

We have put the "improvise" AD3 in today's heavy rain fall test and the result was quite impressive....

 

intent to run a few more test to conclude our test report which could be share if there are interested Advia3 riders and owners.....

 

This?

 

Edited October 1, 2013 by Andre

[advia89]

I think we have found a way to eliminate or minimize the rider from getting wet by the rainwater which importantly, this improvising did not incur huge cost or massive modify work......

 

We have put the "improvise" AD3 in today's heavy rain fall test and the result was quite impressive....

 

intent to run a few more test to conclude our test report which could be share if there are interested Advia3 riders and owners.....

 

Hahaha.... Andre.... not this one you post:cry:. this is our swee swee prototype test model.....

Edited October 1, 2013 by advia89