CBR150R Riders, Join us now!

[endybike]

- wrong post

[d0n]

Don't come and poison me ahhh don.... haha I put this, still need addition bracket... very ma fan...

 

I just went to hou heng to change tires and re-wire my IU. Now everything increase price over there liao.. lol..

 

Not worth to change at all....

 

i just went there to get my front fork seals replaced.

RM$65.

shiok~

 

actually for your lc135, can consider venturing deeper into malaysia for the shops. since lc135 commonly available there. im sure there will be some shops selling lc135 parts for lower price. why dint get japan tyres from LAB instead? nowadays rainy weather leh.

[xbfish]

i just went there to get my front fork seals replaced.

RM$65.

shiok~

 

Your fork seal broke and leaking ah?

 

I used to replace my nsr fork seal @ kok ping. Also RM$65. Very cheap compared to Singapore SGD$60.

 

Btw where do you often patronize in AGL shop?

 

actually for your lc135, can consider venturing deeper into malaysia for the shops. since lc135 commonly available there. im sure there will be some shops selling lc135 parts for lower price. why dint get japan tyres from LAB instead? nowadays rainy weather leh.

 

Yup I know deeper inside got... Just lazy to go venture alone.. haha.. Want join me?

 

Bridgestone from LAB still expensive.. I changed Maxxis also quite sticky compared to battalax. Mai hiam buay pai liao...

[d0n]

Your fork seal broke and leaking ah?

 

I used to replace my nsr fork seal @ kok ping. Also RM$65. Very cheap compared to Singapore SGD$60.

 

Btw where do you often patronize in AGL shop?

 

Yup I know deeper inside got... Just lazy to go venture alone.. haha.. Want join me?

 

Bridgestone from LAB still expensive.. I changed Maxxis also quite sticky compared to battalax. Mai hiam buay pai liao...

 

one side of the fork leaked abit

dint want to wait till e whole thing chui and oil start dripping all over. so kiasu abit go change earlier loh.

i also visit Hou Heng (e branch further up along AGL). been with them for quite some years liao.

 

is maxxis a malaysian brand? how's e pricing like?

venture further in malaysia ah. hahaha. yr melayu language strong boh? just in case hor lan think if i wan to find CBR150 parts, got to ride till KL liao. kekekeke.

[ahbiao]

eh, shops at AGL don't seem to have parts for CBR150 leh. Which shop would your recommend for performance parts?

[xbfish]

one side of the fork leaked abit

dint want to wait till e whole thing chui and oil start dripping all over. so kiasu abit go change earlier loh.

i also visit Hou Heng (e branch further up along AGL). been with them for quite some years liao.

 

Is it the shop got 2 kids inside?

 

I once patronize them, but the scratches my fairing when fixing back my sp fuel tank. Then I went to the lower branch liao..

 

is maxxis a malaysian brand? how's e pricing like?

venture further in malaysia ah. hahaha. yr melayu language strong boh? just in case hor lan think if i wan to find CBR150 parts, got to ride till KL liao. kekekeke.

 

Maxxis is a taiwan brand. Not bad actually.

 

My melayu cannot make it. That's one of the reason I never venture further in to find good lobangs.. haha..

 

You ride till KL just to get performance parts... like bo hua liao..

[syihabuddin]

Hi Guys,

 

I'll be buying some of our bike's parts from Thailand. That's where the bike is made, that's where you can get em at a relatively lower price than here. I was wondering if any one is interested to hop on board to get anything?

 

OEM parts are all available unless it has to be backordered, that might take a little longer. Otherwise we can expect it to arrive really quick. This is just for my own personal shipping, nothing big. So don't go around asking for an engine block or something alright.

 

I think they also have other aftermarket items.

 

Drop me a PM if you're keen.

 

Cheers.

[bugsy_]

i wanna change my paintwork but not sure what looks good.any suggestion guys? what do you think of this http://www.bikepics.com/pictures/1147508/ ?

[xbfish]

i wanna change my paintwork but not sure what looks good.any suggestion guys? what do you think of this http://www.bikepics.com/pictures/1147508/ ?

 

Not bad

 

Show you last time my CBR paintwork which I find it quite nice:

 

http://i53.tinypic.com/11tadzr.jpg

[topekomz]

hi guys just want to ask my bike is cannot start after 2 weeks of not being used. the green neutral light is on and when is press the ignition button theres like a stuck electrical sound coming from the front seat area? thinkin maybe its the spark plug. need some help. wanderin if any of you guys encounter any problem like this?

[syihabuddin]

hi guys just want to ask my bike is cannot start after 2 weeks of not being used. the green neutral light is on and when is press the ignition button theres like a stuck electrical sound coming from the front seat area? thinkin maybe its the spark plug. need some help. wanderin if any of you guys encounter any problem like this?

 

bat flat maybe? for me the rpm meter gets pretty erratic when my batt is reaching the end of its life.

 

give it a push start. if it starts, get it to a bike shop to have it looked at/battery changed.

 

cheers.

[endybike]

still looking for a good condition cbr150r, if any of you have any lobang do let me know

[bugsy_]

Not bad

 

Show you last time my CBR paintwork which I find it quite nice:

 

http://i53.tinypic.com/11tadzr.jpg

 

nicee.but the colour reminds me of sg flag.hahah.btw, did the white part gets yellowish? im planning to get it done at agl. cant expect much quality because of the huge difference of price compare to sg. heard that white paint done at agl gets yellowish over the time.

[bugsy_]

dbl post~~~~~~~~~~~~

[topekomz]

bat flat maybe? for me the rpm meter gets pretty erratic when my batt is reaching the end of its life.

 

give it a push start. if it starts, get it to a bike shop to have it looked at/battery changed.

 

cheers.

 

tried push start doesnt seem to be working. had an exercise. the horn and lft/ryt signal are working. but no tail light and head light. aiyah.. must call a tow service??

[xbfish]

nicee.but the colour reminds me of sg flag.hahah.btw, did the white part gets yellowish? im planning to get it done at agl. cant expect much quality because of the huge difference of price compare to sg. heard that white paint done at agl gets yellowish over the time.

 

haha all my past bikes resemble sg flag because I like white and red combination.

 

Mine white didn't get yellowish over time as I use good quality paint

 

AGL paint quality not very good. If you want it to be long lasting, then you shouldn't go there.

[d0n]

eh, shops at AGL don't seem to have parts for CBR150 leh. Which shop would your recommend for performance parts?

 

i agree there r not much of parts available for cbr150 at AGL

if u r lucky, u can get aftermarket ones.

i've seen front headlight, rear taillight, etc so far.

 

for e rest of the parts, usually is cannibalise from NSR150SP ones.

like racing footrest.

 

Is it the shop got 2 kids inside?

 

I once patronize them, but the scratches my fairing when fixing back my sp fuel tank. Then I went to the lower branch liao..

agree that they can be pretty careless when it comes to taking care of fairings. so e latest time i went, i auto removed my side fairings before riding in. wahahha.

[d0n]

hi guys just want to ask my bike is cannot start after 2 weeks of not being used. the green neutral light is on and when is press the ignition button theres like a stuck electrical sound coming from the front seat area? thinkin maybe its the spark plug. need some help. wanderin if any of you guys encounter any problem like this?

 

any cranking sound from the electric starter?

could be battery low power.

try playing with the signal lights and see how long the neutral light can last.

if it doesn't last long, then it's confirmed battery low.

u can do a push start to get engine running again + get the battery recharged automatically as the engine runs.

 

haha all my past bikes resemble sg flag because I like white and red combination.

 

Mine white didn't get yellowish over time as I use good quality paint

 

AGL paint quality not very good. If you want it to be long lasting, then you shouldn't go there.

 

spray black color loh. hahaha. then u wont be afraid of fading colors~

[syihabuddin]

tried push start doesnt seem to be working. had an exercise. the horn and lft/ryt signal are working. but no tail light and head light. aiyah.. must call a tow service??

 

i really think your battery is flat. this bike needs some technique to push start.

 

**caution: you might drop your bike if you use this method**

 

engage 2nd gear. clutch in. push your bike. I mean really push it. not mount it. Push it while standing by the side. need to get a decent speed before you decide to pop the clutch. when you feel the speed is just right throw the clutch. once your baby starts purring, very quickly clutch in and mount the bike. if it fails, try again, only faster the second time.

 

i feel this technique is alot easier than mounting the bike and pushing it.

 

just dont drop your bike hor.

 

cheers!

[thisisme]

hi guys wishing all a Happy New Year

May the coming year everyone ride safe.

[d0n]

i really think your battery is flat. this bike needs some technique to push start.

 

**caution: you might drop your bike if you use this method**

 

engage 2nd gear. clutch in. push your bike. I mean really push it. not mount it. Push it while standing by the side. need to get a decent speed before you decide to pop the clutch. when you feel the speed is just right throw the clutch. once your baby starts purring, very quickly clutch in and mount the bike. if it fails, try again, only faster the second time.

 

i feel this technique is alot easier than mounting the bike and pushing it.

 

just dont drop your bike hor.

 

cheers!

 

easier to just sit on e bike and roll it down some downslope~

 

hi guys wishing all a Happy New Year

May the coming year everyone ride safe.

 

thanks racer~

wish u & family a prosperous rabbit year too! huat ah!

[chipsmore]

happy chinese new yr fellow riders!

[endybike]

yeah happy chinese new year guys, lets go riding tgt after i get my bike

[syihabuddin]

hello all.

 

unfortunately, i crashed earlier this afternoon. now the whole upper cowl area is smashed and bent inwards.

 

do you know someone or some place that can unsmash and unbend the cowling frame?

i need to get it straightened. :X

[niteblade]

hi, anyone know where to buy big balancers that can fit on the cbr150? all the shops i went to say that cbr150 incompatible with alot of balancers. and can racing footrest be installed?