Troubleshoot Your Rides

[Flowerboi]

Originally posted by RxzDelux@Oct 25 2006, 09:03 PM

Dat is because your FRONT tyre has WARP! Become like high low high low. The tyre not even and it is dangerous for riding. If your tyre is WARP already pls do change at the earliest chance before you fall down or skidded.

cant really say dat the tyres are warped... some tyres when used for few weeks also become shaky when the handle bar is let go...sometimes, i feel dat is the tracks and material of the tyres dat caused it.

[RxzDelux]

Originally posted by Flowerboi@Oct 26 2006, 01:11 AM

cant really say dat the tyres are warped... some tyres when used for few weeks also become shaky when the handle bar is let go...sometimes, i feel dat is the tracks and material of the tyres dat caused it.

So far mine bo taiji leh.

[AspMonK]

ahah...

[katana999]

MERGED THREAD

Topic : Problem wif wave nid help

Description : on goin even after let go

 

********************************************************************

 

wah lao sian... this morning when i start off to work, i normally will throttle a bit to warm up the engine. Neh neh... dunno wads wrong wif my bike today i throttle liao then let go the throttle kept on throttling! i throttle more to try to disengage it, it stayed on wif the super high throttle somemore! until i haf to off the engine to stop it sia... @_@

 

what exactly is wrong wif it?? do anyone know? sigh that was how i rode to work today sia... @_@ no nid right hand to throttle one basket...

[silversurfer2012]

my friend had the same problem but no as serious as urs.. accord to the mech, its his valve that has some problem and need to replace, end up the bill for it was about 100+-/

[katana999]

omg.... liao liao lo... sigh... i nid to figure a way to ride to my bike tiam sia...

[davidww81]

Originally posted by katana999@Nov 24 2006, 11:14 AM

wah lao sian... this morning when i start off to work, i normally will throttle a bit to warm up the engine. Neh neh... dunno wads wrong wif my bike today i throttle liao then let go the throttle kept on throttling! i throttle more to try to disengage it, it stayed on wif the super high throttle somemore! until i haf to off the engine to stop it sia... @_@

 

what exactly is wrong wif it?? do anyone know? sigh that was how i rode to work today sia... @_@ no nid right hand to throttle one basket...

i oso have this problem few days back on sat at the PIE suddenly. had to hold the brake to slow the bike down and stepping on the clutch to go road shoulder. I off engine and on it the bike ok liao. Then after awhile the bike died while riding and when tried to start got one 'tiak tiak' sound coming out from the right side of engine...anyone know wat's tat>?

[Jamaican Jawa]

hmm im no too sure..

but mine happen like tis oni after accident..

nw ok liao..

go johore service..

 

but if ur throttle kept on revving

wat i noe is tat either ur throttle grip stuck or throttle cable is too tight

[Jamaican Jawa]

i got saw one mechanic adjust the cable den ok liao..

he was like loosen the nut...

 

not sure if ists werk..

but can try..

 

if dun dare juz send to workshop maybe they can help..

dun tink they will charge u unless u go to workshop tat wan to eat ur money..

[RxzDelux]

Below your throttle there's one nut i think ard size 13. Can use plier. Loosen dat nut then REadjust the cable when ok already then tighten back. Should be ok already after dat. IF don know or confuse pls don do anything go to workshop. Thanks.

[kucari]

hallo yesterday suddenly when moving off from traffic like when picking up speed from gear one and gear 2 my wave suddenly jerked twice quite stongly...

and the same thing keeps reoccuring afterwards...

 

anybody know what's the problem?just changed engine oil a few days ago 2 esso gold...thanx!

[ZoRoM]

ur carb setting or Izzit ur chain is lose/dry!

[Cap_Tsu]

MERGED THREAD

Topic : Engine sound normal?

Description : Nil

 

********************************************************************

 

Hi all

 

My engine sound like quite high pitch.. sound so diff frm the rest.. one mechanic say timing suspect timing chain prob, need open up n c.. izzit true? timing chain prob is high pitch one? if nt wat can be the prob? plus abit like no power recently liao..

 

brake oso prob.. when riding can hear abit screeching sound.. jus change front n back brake pad.. any DIY solution can help?

 

 

thks thks

[ZoRoM]

Try to looks ard the thread!

 

Got some one talks abt it...

 

[pyro13]

scrreeching could be brake dust... i tink ur idling.. if timing chain got tock tock sound bro

[xwei54]

i skidded on my left side when i e braked today. it was raining so i not sure if there is anything leaking. but my friend mention that there are oil stains on the road where we skidded. when i reached home, i realised that there are oil stain on the metal part connecting the 2 sockets which i dont think i see yesterday when i just got my bike.

 

 

what could be leaking? i working till next monday before i can go and bike shop and check. is it safe to ride my bike? i manage to travelled from geylang back to jurong after the accident.

[pyro13]

wat bike?? wat metal part???

[xwei54]

wave. the metal piece that cover the rear socket on the left side of my bike have the oil stain.

[pyro13]

u mean swingarm?? if u can ride back should be ok bro

 

but try to ride ur bike and let go.. se if swerves to any direction

[thrasher]

if ur bike handlebar starts to vibrate like nobody business ah... suey ah. either ur rim bent somewhere or something else chasis bengkok ah.

[xwei54]

Originally posted by thrasher@March 02, 2007 11:16 am

if ur bike handlebar starts to vibrate like nobody business ah... suey ah. either ur rim bent somewhere or something else chasis bengkok ah.

if rim bend must change asap or leave it like that is ok one?

[xwei54]

Originally posted by pyro13@March 01, 2007 09:41 pm

u mean swingarm?? if u can ride back should be ok bro

 

but try to ride ur bike and let go.. se if swerves to any direction

if let go swerve how much then got problem?

[Man V.1]

Originally posted by xwei54@March 02, 2007 11:26 pm

if rim bend must change asap or leave it like that is ok one?

if rim bend better go get it change..

 

when u let go, see whether it swerves to the right or left..if yes, go down your bike shop and get it repair...

[thrasher]

i work at pizza hut... and most of the bikes swift right and left like nobody business HAHA. u can either...

 

a. go make the amendments straight away (highly recommended)

b. get used to it and wait till an accident happens in the future. (NOT RECOMMENDED)

[sICkbOi-dOt-cOm]

Ermmm.. Think He Was Asking Wat Is Leaking?