is there a law ERP UNIT MUZ MOUNT ON BIKE ? quarrel with vicom pigs

[Non Stop Racing]

hi i just like to know guys. is it a MUST to mount erp on bike ? im using a portable one for my bike. recently i went pass gatery cant detect, so lta send me a letter go down take alook. my erp is taped nicely with all the wires tied and attached to my 9v battery. The farking amk vicom pig cut off all my tape on the erp juz to see hav a clearer look. basically just rape everything apart in a messy **** and check. nothing wrong with my erp and he began to talk me in a bossy manner, oei push your bike here.i thought, for ****..my unit is not even on the bike u fagg !! then later he say again, oei u know erp muz mount bike ? :angry:

[shaunz]

sounds pissing enough

screw him back

the most you tio $10+ fine only

[aRcHeR]

no laws that i've heard of with regards to IU must be mounted on bike.

[OhMiGosh]

but its your fault what.. u didnt mount on the bike causing your IU unit to be not detected by the system..be glad that they didnt summon u $70 for no IU. Reason being simple why need to mount on the bike so that it can be detected. for you ppl who take it out making it a portable IU if at the end of the day it cant be detected.. then i think you should be fined $70. dont whine here when you yourself created the problem with your own hands.

[Non Stop Racing]

duh. if i can pay $$ to settle this i will gladly do so instead of your so call whining. but this shiat you have to go down explain n settle . previouslly electrical failure on erp,inspector waived off cos erp working but bike wire broke off.ask me to fix, acknowledge letter and off i go. this time this sob refuse to acknowledge letter bcos my bike no mount erp ? u get what i mean here... since no law say muz mount ,erp working fine.explain already still dont want . what a difficult sob !!!!!!!!!

[edition]

heard ur frustration .. but till nw i believe there isn't a law stated that erp is a must to mount on the bike .. as there is oso pple wif no erp unit .. blame here n there end up is the 1 who started tis unit fault .. so cool dwn dude wat past has past n live happily life ahead ..

[OhMiGosh]

duh. if i can pay $$ to settle this i will gladly do so instead of your so call whining. but this shiat you have to go down explain n settle . previouslly electrical failure on erp,inspector waived off cos erp working but bike wire broke off.ask me to fix, acknowledge letter and off i go. this time this sob refuse to acknowledge letter bcos my bike no mount erp ? u get what i mean here... since no law say muz mount ,erp working fine.explain already still dont want . what a difficult sob !!!!!!!!!

 

yeah precisely.. so in the first place if u didnt so called "dis-mount" the IU unit from your bike. you wont end up in a situation like this now? stil don get what i am trying to put thru to you?

[myxilplix]

I got no IU on my bike, and will never mount that ugly piece of crap on my baby.

But then again i'll never ride her thru an active gantry.

[EJ]

I got no IU on my bike, and will never mount that ugly piece of crap on my baby.

But then again i'll never ride her thru an active gantry.

 

gantries are popping up everywhere now.

 

i intend to remove my IU too, but the carpark at work needs it so yea that bloody parrot is here to stay. sigh.

[blurrblurr]

Mine got a even better experience with them. I dun use bracket to mount my unit on my bike. I use 3M Heavy duty double side tape to stick on the faring. So one day my unit requires for a check in LTA. And guess wat. He told me no bracket cannot change new IU. I was like WTF.

[Non Stop Racing]

I got no IU on my bike, and will never mount that ugly piece of crap on my baby.

But then again i'll never ride her thru an active gantry.

 

 

same for me . i will put underseat but too bad if i have to commute with pillion everynow n then. anyway problem solved !!!!! just a phone call, lots of **** talking and sounding piss. they waived it and case closed...haha tks to a advise from forumer bro here. screw vicom amk !!!!!

[Replay]

i wanna hide oso cannot hide.. i riding phantom..

[B20]

for the protable 1 like the thread starter is using... i guess u can hide it in ur bag bah....

[FinG]

buy runner hide in panel pwned:)

[Non Stop Racing]

put in bag not sure can detect anot. i use 3m paste on my tank and the back of erp. wan use juz stick on it ,wan deattach up to u. cut size is rather small but holds well. cheers

[sheep]

They dun even know how that dumb IU work..

mine cant detect cos i hid it.. so inspection time.. Put the bracket and mounted it outside again..

Guess what they say? The angle of tilt is wrong thats why cannot detect.. WTF

they have zero knowledge of how it works. advise me to buy a nicely 45 degree bracket so that it wun fail again..

[Wankidal]

Just curious.

 

Does anyone knows where are the sensors that detect your IU?

 

Is it at the top of the big goal post or the strips just below the goalpost?

[EvilGixxer]

Its the big square thingys at the top.

[Guest limpeiwah]

better lup him

[06apr06]

i wanna hide oso cannot hide.. i riding phantom..

 

Throw into our precious box lor..LOLx

[kambing]

Throw into our precious box lor..LOLx

 

is dat u mr gary ggry2k..

:x

[madman]

They dun even know how that dumb IU work..

mine cant detect cos i hid it.. so inspection time.. Put the bracket and mounted it outside again..

Guess what they say? The angle of tilt is wrong thats why cannot detect.. WTF

they have zero knowledge of how it works. advise me to buy a nicely 45 degree bracket so that it wun fail again..

 

actually, i believe the angle of how the iu faces the gantry can affect it's efficiency.

 

as long as you dont tamper with the iu itself, there's nothing against the law. even though mine not portable type, but i've taken it out and plug it back in when needed at times also.

[Murinus]

They dun even know how that dumb IU work..

mine cant detect cos i hid it.. so inspection time.. Put the bracket and mounted it outside again..

Guess what they say? The angle of tilt is wrong thats why cannot detect.. WTF

they have zero knowledge of how it works. advise me to buy a nicely 45 degree bracket so that it wun fail again..

 

i agree that those people at vicom knows nuts about how the IU works... once my previous IU's backlight had a problem... its forever on even when i turn off the bike engine

 

went down to vicom and they said its because the IU is lying flat and not in a 45 deg angle so the light is on... if i get a bracket to make it 45 deg the light will go off by itself