<D> VTEC Indictors

[ZzGaNgStErzZ]

haha..i lazy go find the pic..i noe u'll always make mi happy

 

-_-" :dozed:

[vtec power]

diao....dun realli understand thru the pic

[ZzGaNgStErzZ]

step to diy vtec indicator

parts required

1. 1 x LED

2. 1 x 220ohm resistor

3. thin wires either all red or all black or red n black

steps to doing it

1. led comes with one longer leg and one shorter leg

2. soulder the resistor to the longer leg, the other end of the resistor to the wire.

3. the shorter led leg also soulder one wire to it

4. u have have the basics to have some indication

5. next opens up your fuel tank by taking out the fuel line and the vaccum tube which are both on the right side. on the left is the fuel level indicator connector, disconnect it. use a size 12 to open the both at the seat. life up abt 45deg and pull back to take ur full tank out.

6. on the left hand side there is this grey connector that is toward the back of the main frame. that is the connector of the vtec.

7. take the wire with the resistor connect it together with the wiring and plug back the connector. then the shorter led wire connect it to any ground ie chassic find some screw and screw it together for best result.

8. you have done your vtec indicator.

9. to test clutch in and rev. the led shld light up.

Courtesy from quizesilver.

[gene98]

Courtesy from quizesilver.

 

when wanna do?

[ShnHwA-]

when wanna do?

 

he haf liao lehz..haha

[fraggershell]

how many kinds of indicators out there in the market? any place to recommend? my fren said, the indicator screw up the cdi or ecu, not too sure wad are these anyway.

[cheowseng]

no cdi wirings is touched at this point. basically a LED, Resistors, and a +ive & -ive wire. one connect to ground, the other to the solonoid as what ZzGaNgStErzZ had shown in the pic.

[ShnHwA-]

how many kinds of indicators out there in the market? any place to recommend? my fren said, the indicator screw up the cdi or ecu, not too sure wad are these anyway.

 

there isn't any indicators for vtec in the market..it's all DIY-ed..Basically the indicator in which we r toking abt is connecting the wires of the led to the vtec solenoid & to ground..none of them goes to the CDI or wat ECU..

 

Vtec indicator will only light up when ur vtec activates..

[fraggershell]

wow.. any idea where can i get this done?

[ZzGaNgStErzZ]

wow.. any idea where can i get this done?

 

:faint: :faint:

got D.I.Y u nv see? let ppl do u still muz pay lei, if not u pay mi i do 4 u.

[fraggershell]

how much? wad designs can u provide? i dun mind man.. haha

[ahboy_ahboy]

i think buy the $10 better la

[Freak7]

Hi all, just got my spec 1 and my bike currently does not have grounding at all. Was thinking of putting in the vtec indicator as well. Anyone can recommend a shop to do it together with the cost OR someone here can help to D.I.Y for me?

[ShnHwA-]

juz redone my vtec indicator..will post pic soon

[ahboy_ahboy]

cool waiting ..

[ShnHwA-]

http://i46.photobucket.com/albums/f125/shinhwa86/040120082316.jpg

http://i46.photobucket.com/albums/f125/shinhwa86/040120082315.jpg

http://i46.photobucket.com/albums/f125/shinhwa86/040120082320.jpg

 

the pics of my vtec indicator..i put green as my vtec, blue as my headlight & red for my side stand indicator..

 

the last pic is the location of the vtec solenoid..the grey connector

[faruk85_85]

cool.. it look nice

[LaVsy]

Sh|nHwA-

doing a MO on this?

[gene98]

if he do MO he will cry.

[eement]

ya lorx...btw where u buy the 3 indicator?or u make urself de?

[ShnHwA-]

IF u guys can read properly, its DIY!!

[IST]

ya lorx...btw where u buy the 3 indicator?or u make urself de?

 

Think u can look for this man ( Triple X ) , he did for me 3yr++ ago.

[LaVsy]

IF u guys can read properly, its DIY!!

 

yes i know is DIY

but asking whether u willing to mass production this piece of small item?

[ZzGaNgStErzZ]

if he do MO he will cry.

 

yes i know is DIY

but asking whether u willing to mass production this piece of small item?

 

gene replied liao.

 

ya lorx...btw where u buy the 3 indicator?or u make urself de?

 

its juz 3 leds, resistor, box and wires.

[eement]

ya...how to connect to the side stand de?