[Discussion] CB400 SUPER FOUR HYPER VTEC Revo

[Ah_Peh]

normal vtec full system cannot fit? or not suitable?

 

Should be suitable...if talking abt legal full system, not out in market yet. Even though i get a legal system also cannot pass inspection.

[rayhunter]

I think the customer they talking abt is me...but reali thanks race werks for the works done on my bike. But the stupid exhaust is reali full of blockage. Dnt know when the exhaust system will be out in the market.

 

u mean those current street legal aftermarket exhaust for superfour can't fix on yr revo?

[Ah_Peh]

u mean those current street legal aftermarket exhaust for superfour can't fix on yr revo?

 

I think have to mod abit, even can fit lta also cannot issue legal cert as system is nt for Revo.

[rayhunter]

I think have to mod abit, even can fit lta also cannot issue legal cert as system is nt for Revo.

 

oh i see..that's interesting,i thought as long as it is under superfour CB 400 family it can pass..so they(lta) actually go by model..like spec 1,2,3,revo..? or carb and fuel injection?

[Ah_Peh]

oh i see..that's interesting,i thought as long as it is under superfour CB 400 family it can pass..so they(lta) actually go by model..like spec 1,2,3,revo..? or carb and fuel injection?

 

Ya, i oso thought was all the same. And my orginal endcan is already different not bolt on, something like slip on.

[skateboy]

that have to check with LTA that is the current system suitable for revo. capacity is the same, with efi, emission shd b low n not so loud but then again, with modification, hard to say if the exhaust is not loud.

[Ah_Peh]

that have to check with LTA that is the current system suitable for revo. capacity is the same, with efi, emission shd b low n not so loud but then again, with modification, hard to say if the exhaust is not loud.

 

Check already, the header also different. Muz mod to fit. Dnt know when the legal system will be in.

[skateboy]

but then with ur revo, i think gsr c u must siam already. cos not many gsr fit a pc3 n do tuning like that. n we still dunno wat kinda power output is the revo capable of. i'm still wondering the gear 3 at 7k to 8k rpm can hit 120km/h. any comments?

[Ah Pek]

Ah Pek may i know S4 Ver S front and rear sprocket use how many teeth huh? mine front i dun know but rear is 44 is it ok?

 

Ver s and PB1 should be the same lah...front 15 and back 42. If back is 42..you get better 'rushy' pick up and so does your engine braking (I dont like)..non-vtec is better off with 42 (IMHO) for better drag at 2nd gearing..you can reach 130km/hr easily whne passed 11k rmp towards 13 in red...very siok_siok!...follow by 3 gear in red This number of teeth (42)has something to do with the non vtec engine power torque range that its design for..."Japanese Ebgineering".

[Ah_Peh]

but then with ur revo, i think gsr c u must siam already. cos not many gsr fit a pc3 n do tuning like that. n we still dunno wat kinda power output is the revo capable of. i'm still wondering the gear 3 at 7k to 8k rpm can hit 120km/h. any comments?

 

No lah...to hit 120km/h at 3rd gear is above 11k rpm.

[skateboy]

then ibike.hk is giving a false info on that part already.

[Ah_Peh]

then ibike.hk is giving a false info on that part already.

 

I think that is how they promote the bike...rpm6-7k hit 120km/h very fast leh.

I put PC3 the response is fast but not to that extend. If wat they put is real den i muz go ask Race Werks can do like tat or not...but dnt know is it still ridable...

[skateboy]

promote the bike is one thing. but to exaggerate is another. with that rpm n speed, sounds like a 600cc or 1000cc bike. i dun think that is possible. all S4 is different, yes. but the power n torque output is almost similar. n with the bore size n stroke of a 400cc, the bike need to b rev up to the required range to hit the speed. thats for sure. the rest depends on the road, weather, balls of the rider n the cutting of the bike.

[RideHard]

Ah_Peh, can i noe how much u got ur Revo for? I saw e bike down @ Eunos ex Gay Hong now Everbright yesterday.... bike look damn sooooeeee! , saw it in black, silver & blue so far. by e way did u chk out wif motoworld if they hav dos aft market exhaust ur lookin for??

[Ah_Peh]

Ah_Peh, can i noe how much u got ur Revo for? I saw e bike down @ Eunos ex Gay Hong now Everbright yesterday.... bike look damn sooooeeee! , saw it in black, silver & blue so far. by e way did u chk out wif motoworld if they hav dos aft market exhaust ur lookin for??

 

i bought mine for below 13k from I-motoring...check with motoworld already, think the exhaust coming in june.

[skateboy]

below 13k is machine price or on the road price?

[xstorm]

Anyone bought a new spec 3 recently ? At what price ?

[rayhunter]

Anyone bought a new spec 3 recently ? At what price ?

 

revo u mean??

[Ah_Peh]

below 13k is machine price or on the road price?

 

I got some discount...coz Race Werks refer me to i-motoring..

[ah_xian]

I just got new spec3 otr 12.8k with IU,insuranc all throw in. With interest is

about 13.2k with a 4 yr loan @ 4% interest per yr. Free stuff include 2 mineral oil change with a filter, engine guard, suspension protect and givi widshield. Is tis consider a gd deal?

[Ah_Peh]

I just got new spec3 otr 12.8k with IU,insuranc all throw in. With interest is

about 13.2k with a 4 yr loan @ 4% interest per yr. Free stuff include 2 mineral oil change with a filter, engine guard, suspension protect and givi widshield. Is tis consider a gd deal?

 

should be quite a good deal...i got my bike cheaper as i paid cash, so i think tat's y my price is different. Anyway mine nvr include insurance and also no freebie.

[rayhunter]

I just got new spec3 otr 12.8k with IU,insuranc all throw in. With interest is

about 13.2k with a 4 yr loan @ 4% interest per yr. Free stuff include 2 mineral oil change with a filter, engine guard, suspension protect and givi widshield. Is tis consider a gd deal?

 

u've gotten yrself good deal:thumb:

[JbAtRaCeR]

I went to survey on the new revo today,saw the bikes at M1 Motoring and Southern. Nice. Thinking of getting one for my dad since he got me a spec 3 last year. But then still have doubts about the price.For the price,top up abit I can get myself a fazer 600 and my dad can get my spec 3.

[jeremy_kokwk]

Yoz Brudders,

 

is there a new version coming out on the market soon? I heard from my frds but wanna verify it here.

 

 

Cheers.

[Ah_Peh]

The new super 4 is call Revo...out in mkt already.