[Archived - 2009] All About Cosmetic Mods

[EK]

Yea should have.. If you want mirror mounted, quite unique, i got.

I wont mind giving it away.

 

 

I have a IU bracket designed to fit behind the headlight.

Just a base metal plate welded to a U shaped stand.

 

Keeping it just for backup..or instances like this..

I"m ok if you wanna borrow for a short while

 

Thanks for helping help i appreciate it... but i intend to buy one just for back-up like MarvelStone said... very likely my vertical iu will encounter problems again...

 

YasMan, that is very generous of you... you dun need the iu holder anymore? I dun mind treating u coffee

 

The top of the IU needs be facing the front & slightly tilted so the cashcard side faces the rider.

 

I have tried many positions for my IU & this is the position that works consistently.

 

ya.. that is wad the person inspecting the IU told me... so he advise me to mount it horizontally or else will risking giving coffee money to LTA.. actually kanna 2 times warning to reposition my IU lei... this time LTA sent me letter said my IU cannot be detected when passing through gantry so must sent my IU for inspection... so better reposition it back just to play safe for the time being...

[EK]

oh ya.. madman! do you have this? high sissy bar with rack... been looking for it for sometime lei..

 

http://img.photobucket.com/albums/v359/calm_guy/P050708_2045.jpg

 

saw this at a carpark near imm..

[madman]

hello hello! interested in saddle bags and crashbar and bullet headlight, i riding daystar, can fit into it anot ar?

 

Saddlebags are universal, so no prob.

You might need to relocate or extend the rear signals back a little if you get the m size saddles, but that's a small issue.

 

For crashbars, I dun think it'll fit, as crashbars are designed to mount on certain bikes only, and different bikes have different mounting points. All phantom ta200 are the same though, regardless of new or old models.

 

Headlites, it shd not be a problem too, as it is rather universal, brackets can be changed.

[madman]

i wish to respray my bike, any recommendation for paint job? and the price? been thinking of a nice design to paint the bike

 

Depending on wad bike you are planning to spray, the parts to spray, the colors, the design, it would be rather difficult for anyone to give you an estimate if you dun have any of the above infos on hand.

 

The last is depending from shop to shop, the quality of paintjobs etc, the prices will vary substantially.

 

oh ya.. madman! do you have this? high sissy bar with rack... been looking for it for sometime lei..

 

http://img.photobucket.com/albums/v359/calm_guy/P050708_2045.jpg

 

saw this at a carpark near imm..

 

ok. I know some of you guys are looking for this, I will commission my guy to start making some ya.

[f.zi]

im intending to send my rims for spray painting to a colour, maybe blue or black and was quote 80RM for both(if i remembered correctly) but i prefer for my rims to be chrome though. any idea where can i get it done and for how much?

[Vespa11]

Madman do you do painting ? I saw on your site that you have the service but the page is unavaible. I am thinking of juz a solid colour with a double racing stripe thru the centre.

[djkhemical]

Hey madman....fixed up all the parts.... looking good now.....

And loud....hahaha

[EK]

ok. I know some of you guys are looking for this, I will commission my guy to start making some ya.

 

Waiting how long will tat be? can start saving first..

[TheYasMan]

Hey madman....fixed up all the parts.... looking good now.....

And loud....hahaha

 

PREVIEW LEH!!!!

Heard from Madman yours is getting from awesome to awsomer!

PM me at least if you dont want to show the rest..

 

im intending to send my rims for spray painting to a colour, maybe blue or black and was quote 80RM for both(if i remembered correctly) but i prefer for my rims to be chrome though. any idea where can i get it done and for how much?

 

Omg, chrome?? Youre craaayyzehh lol.

If you want black, try DIY spray first.. Many people have done that, it's quite retentive. Price is only for spray can(s).

[ahweebbq]

i'm new here, getting a daystar soon. Does the handlebar in pinkphantom suit daystar? can it be installed on a daystar? and what bout the bullet headlight? if i wana get the handlebar, where do i get it and installations included???

[f.zi]

PREVIEW LEH!!!!

Heard from Madman yours is getting from awesome to awsomer!

PM me at least if you dont want to show the rest..

 

 

 

Omg, chrome?? Youre craaayyzehh lol.

If you want black, try DIY spray first.. Many people have done that, it's quite retentive. Price is only for spray can(s).

 

i want to DIY, but no tools lah. and kinda busy with other commitments like studies, fyp, gf, family and work. lol and im keeping this bike for long, and most probably if i can get a decent price for my rims to be chromed, ill do it.

[f.zi]

yesterday in my sleep, i dreamt tt i was at madman's place shopping for alot of stuffs. tts crazy when i dont even have the money. and weird too, of course. hahaha:slapforehead:

[TheYasMan]

i'm new here, getting a daystar soon. Does the handlebar in pinkphantom suit daystar? can it be installed on a daystar? and what bout the bullet headlight? if i wana get the handlebar, where do i get it and installations included???

 

Congrats on the upcomin new ride.

Bullet headlights are generally universal, can install on almost any cruiser/chopper/bobber or naked bike. Just have to find the proper bracket.

Handlebars IMO should be able to so long as your risers (the screws) are of the same size as those of Phantoms.

Dont worry about installation, can DIY, pay madman when he's free to help, or just go shop and tip them for the job.

 

i want to DIY, but no tools lah. and kinda busy with other commitments like studies, fyp, gf, family and work. lol and im keeping this bike for long, and most probably if i can get a decent price for my rims to be chromed, ill do it.

 

U dont need mumbo-jumbo tools to DIY paint your rims bro.

Just a cleaning agent to clean them rims prior to spraying, some tape and newspapers to localize your painting area and avoid remnant aerosols from going to other parts, and maybe a jack for the rear wheel.

 

Do inform me if youre goin ahead with chroming though, may want to tompang the chroming load

[f.zi]

U dont need mumbo-jumbo tools to DIY paint your rims bro.

Just a cleaning agent to clean them rims prior to spraying, some tape and newspapers to localize your painting area and avoid remnant aerosols from going to other parts, and maybe a jack for the rear wheel.

 

Do inform me if youre goin ahead with chroming though, may want to tompang the chroming load

 

i will, i searched previous thread about chroming of our rims and it cost tt much ah? wah. hahahah im considering to spray paint it now, not diy of course, cause im not the type of person who really dare to disassemble and assemble major parts on my bike yet. but ill source for shops tt do cheap chroming(nt talking about real chrome, and i read in the precious thread tt chrome rims are a hassle to take care off) and keep you updated man.

[ahweebbq]

where's madman's shop??

[lawbah]

Pasir Ris, http://www.pinkphantom.com

[madman]

yesterday in my sleep, i dreamt tt i was at madman's place shopping for alot of stuffs. tts crazy when i dont even have the money. and weird too, of course. hahaha:slapforehead:

 

i'm new here, getting a daystar soon. Does the handlebar in pinkphantom suit daystar? can it be installed on a daystar? and what bout the bullet headlight? if i wana get the handlebar, where do i get it and installations included???

 

sms or call 9858 6442 ya... Handlebar and headlite shdn't be a problem. They are universal as mentioned by yas. Headlite just need the correct bracket... however, I dun know if the bracket I have suits your ride. If not, can always go source from somewhere else...hahaa

 

Waiting how long will tat be? can start saving first..

 

dun worry, you can start saving now...hahaa

 

Hey madman....fixed up all the parts.... looking good now.....

And loud....hahaha

 

oh my, so when free go take photos. Go changi v lah, so near your workplace.

 

Madman do you do painting ? I saw on your site that you have the service but the page is unavaible. I am thinking of juz a solid colour with a double racing stripe thru the centre.

 

that shd cost about $250 or so.

 

Pasir Ris, http://www.pinkphantom.com

 

thks for reply.

[Seraph]

Hey there!

Any idea where to get a tankbra for phantom? or does it even exist?

[EK]

find madman

[madman]

Hey there!

Any idea where to get a tankbra for phantom? or does it even exist?

 

you've come to the right place. sms / call me.

 

find madman

 

thks for helping me answer.

[madman]

implemented new search engine in webby. hehee...

 

let mi knoe if it works.

 

www.pinkphantom.com

[EK]

hi madman! is it possible to customise a lever?

 

something like this...

http://images.debrix.com/images/harley/x7/260989/IMG_0199.jpg

 

and i understand that u are bringing in those flame design mirror? (or already brought in?)

 

if that is so, i dun mind getting the customise lever and the mirror from you..

 

if possible can pm me price?

[madman]

hi madman! is it possible to customise a lever?

 

something like this...

http://images.debrix.com/images/harley/x7/260989/IMG_0199.jpg

 

and i understand that u are bringing in those flame design mirror? (or already brought in?)

 

if that is so, i dun mind getting the customise lever and the mirror from you..

 

if possible can pm me price?

 

the flame mirrors are coming in really soon. flame lever...hmm... let me see.

[EK]

take yr time..

[lanman]

do you have pictures for the tank ???

 

also anyone tested this tank if it will leak or have some aesthetic problems ???

 

any feedback ????

 

thanks !

 

 

 

 

 

 

 

 

BIG GAS TANK for Honda Phantom

 

Capacity is approx 20 L.

 

It is a new tank, material similar to our stock gas tank.

The shape will be similar to a dragstar 400 gas tank.

 

You can use back your original gas tank cap cover, so no need to have extra set of keys or purchase a set of gas cap (cost $100+). Save the money and the convenience.

 

It will come in standard gloss black color. It will be cheaper if you want it raw (no finishing/ paintwork).

 

Lets start the ball rolling.

 

Price will be from $450 for unfinished tank. $480 for gloss black finishing.

Those who confirm, need to pay $250 as deposit 1st then balance pay upon collection.

I will contact you on how to make payment. So kindly leave your hp number with your nick.

Those riding the new Phantom TA200 (Fire Edition), kindly state TA200FE.

The tank needs a bit of modification, so do let us know.

The rest, ta150 and older models ta200 are ok.

 

 

1) madman / 9858 6442 / no paintwork / ta150

2)

3)