[Group] SUZUKI Bandit

[S750WP]

Originally posted by kata_killer@Jun 10 2005, 04:20 PM

Hello bro, Just done my hazzard light today At Planet. Brought my own switch at $17 damn ex but gd. Ah Chong fix for me at $15 wif Relay given... I like it man... Nw, I kept on playing it.

You bought the car hazard light switch issit, so expensive??

 

Went Guan Hoe today, the uncle quoted me $60plus for the clutch sleeve hub, and $15 for workmanship to change not inclusive of engine oil. And must make appointment next week then can change.

 

So I went KS and bought the clutch sleeve hub myself for $40 and get 3bot Motul semi-syn at Mah for $36. (Saw LcBear getting air filter for his DR200). After that I went Guan Hoe at Rangoon to look for the thrust washer, as KS no stock. The malay guy at Rangoon told me they have no stock also, and they selling the clutch sleeve hub for $50 no stock also, and he advice me normally no need to change the washer. He gave me a tip if still diff to switch neutral, try to change the clutch release on the left hand side of the bike.

 

Then I went to my regular mech to ask how much to install the clutch sleeve hub, he quoted me $30. Damm expensive. He told me must change the pressure plate as well. Anyway I have a spare clutch pressure plate from gsxr400 but not sure of the condition but looks the same to me.

 

One thing in common all of them asked me if I have already change the clutch plate and steel plates.

 

I might be going to planet to see how much Ah Chong quote to fix the clutch sleeve hub.

[S750WP]

Originally posted by S750WP@Jun 10 2005, 12:03 PM

Check the engine oil level is at full when put in upright position. Oil pressure switch also working.

Check my oil again, the bike when put on main stand is above the full mark. When engine running oil level falls below L, guess its normal. I have travelled more than 80km avg 100km/h today and its still working fine.

[S750WP]

Mah accesory opp SLT tower is selling hand phone soon, saw they are clearing the stock at the front of their shop when I went to buy engine oil. Ask the lady boss if they are shifting then came the reply.

 

Next time can view handphone too when buying parts there.

[Shawn--]

Originally posted by S750WP@Jun 10 2005, 05:26 PM

Check my oil again, the bike when put on main stand is above the full mark. When engine running oil level falls below L, guess its normal. I have travelled more than 80km avg 100km/h today and its still working fine.

Yeah i think tats very normal ba. I Push my bike upright, its slightly above H . Then when i start my bike.. it decrease till below L.

[kata_killer]

Originally posted by Shawn--@Jun 10 2005, 07:07 PM

Yeah i think tats very normal ba. I Push my bike upright, its slightly above H . Then when i start my bike.. it decrease till below L.

Sama Sama... U still wans d Grounding wires? Pls PM me ure contact to make an arrangement. thanks... Or else, I'm going out this Sun evening to watch Moto GP.

[Shawn--]

S750WP: When u wanna change to use maxima? I also eager to try out since its slightly better than waterwetter. I think my bike is drinking da waterwetter. Check my reserve tank at pillion seat lower until wanna empty liao.

[kata_killer]

Originally posted by Shawn--@Jun 11 2005, 12:11 PM

S750WP: When u wanna change to use maxima? I also eager to try out since its slightly better than waterwetter. I think my bike is drinking da waterwetter. Check my reserve tank at pillion seat lower until wanna empty liao.

Like tat, I think ure radiator got problem liao... Bro, u still wanna fix d grounding wire anot?

[S750WP]

Originally posted by Shawn--@Jun 11 2005, 12:11 PM

S750WP: When u wanna change to use maxima? I also eager to try out since its slightly better than waterwetter. I think my bike is drinking da waterwetter. Check my reserve tank at pillion seat lower until wanna empty liao.

Top up some disilled water to the reserve tank and monitor for a few days. It may be the coolant not top up fully in the engine (trap air) the last time.

 

If its still falls to almost empty check for coolant leaks after the bike is warm up.

 

I still have left over WW for one more coolant change, will try maxima after I finished the last dose.

[DatsunKing]

Originally posted by kata_killer@Jun 12 2005, 02:26 AM

Like tat, I think ure radiator got problem liao... Bro, u still wanna fix d grounding wire anot?

How much can u get the cables ahhh?

[chee_teck]

Originally posted by S750WP@Jun 10 2005, 05:41 PM

Mah accesory opp SLT tower is selling hand phone soon, saw they are clearing the stock at the front of their shop when I went to buy engine oil. Ask the lady boss if they are shifting then came the reply.

 

Next time can view handphone too when buying parts there.

So thts the Mah Motor where u get ur ERP bracket for $8?

 

i swent to teh one nearer to Upper Serangoon n he ask me go Seng Kwang

 

BTW Skybono, u park ur bike at Burlington today? THInk i say ur bike there la...

 

KL

[kata_killer]

Originally posted by chee_teck@Jun 12 2005, 05:06 PM

BTW Skybono, u park ur bike at Burlington today? THInk i say ur bike there la...

I did park my bike there Yesterday (Sat).

[S750WP]

Originally posted by chee_teck@Jun 12 2005, 05:06 PM

So thts the Mah Motor where u get ur ERP bracket for $8?

 

i swent to teh one nearer to Upper Serangoon n he ask me go Seng Kwang

 

BTW Skybono, u park ur bike at Burlington today? THInk i say ur bike there la...

 

KL

Mah motor parts, $15 for the erp bracket inclusive installation.

[S750WP]

Look at this clutch holding tool for the Ducati, its huge.

 

http://i23.ebayimg.com/01/i/03/ef/61/aa_12_sb.JPG

[S750WP]

Planning to get one of this to change the clutch sleeve hub myself.

 

http://www.auctionpix.co.uk/members/emr663061.jpg

http://www.auctionpix.co.uk/members/dtc663062.jpg

http://i8.ebayimg.com/01/i/04/4b/4d/c0_1_b.JPG

[kata_killer]

Originally posted by DatsunKing@Jun 12 2005, 04:37 PM

How much can u get the cables ahhh?

U wan d wires only or wif installation?

[xiaowang]

what should I look out for when I buy a second-hand bandit 400? Any opinions?

[kata_killer]

Originally posted by xiaowang@Jun 13 2005, 09:48 PM

what should I look out for when I buy a second-hand bandit 400? Any opinions?

Lao Da, S750WP, where R U?

[S750WP]

Originally posted by xiaowang@Jun 13 2005, 09:48 PM

what should I look out for when I buy a second-hand bandit 400? Any opinions?

Please check the old post, I have answer this question numerous of time.

[niterider929]

Mornin guys! Mi gtin my Bandit 400 soon. Nid sum advice on hw far it can go on 1 full tank (excludin res tank) n oso hw far it can go on res tank? Btw, wats its top speed?

[boofeng]

Originally posted by S750WP+Jun 14 2005, 02:27 AM-->

QUOTE (S750WP @ Jun 14 2005, 02:27 AM)

Please check the old post, I have answer this question numerous of time.[/b] i think it'll be nice if each bike model gets their own forum, y'know, so we can sticky threads and stuff so no need to search through a super long thread for info.. hmm..

[imported_DREAM_MACHINE]

welcome to the club bro...

[kata_killer]

Originally posted by niterider929@Jun 15 2005, 07:07 AM

Mornin guys! Mi gtin my Bandit 400 soon. Nid sum advice on hw far it can go on 1 full tank (excludin res tank) n oso hw far it can go on res tank? Btw, wats its top speed?

I can only click 240km without reserve for my Bandit. Reserve so far I tried is 43km then really went dry liao. A... my top speed is 190km/h but need a bit more of time to reach that speed.

[niterider929]

10s 4 all d info,bros!

[S750WP]

Mine can go till 300+km before reserve, stock jetting. Top speed I have yet to try, personal tried up to 140km/h at 8500rpm.

[imported_DREAM_MACHINE]

mine can clock 230km then reserve liow...Guess my jetting worn..

Kata>>>how's ur milage after changing ur needles?still same isit?