[Group] Singapore BAJAJ Team (SBT)

[Lumberjack]

Hi everyone,

Need advice/help from seasoned pros here as it's time to change my chain/sprocket.

Is sinnob any good? $132 vs $136 (from UM) not much difference leh...

P200.

 

Thanks

SERVICE & SPARE PARTS AT UM

 

Servicing

1) Standard Package Servicing ......................................$6.00

 

Engine & Spark Plug

02) Rectified oil leaking on top of engine :

-1pc cap camshaft + 2 pcs 'O' ring: .................... $35.00

-ball bearing (6301) @ $7.50 x 2 pcs ... $15

- ball bearing rear hub x 1 pc .... $8.50

- ball bearing (6302)........ $8.50

- ball bearing (6202) .... $8.00

03) 1pc diaphragm: .................................................. ....$25+5 for workmanship fees

04) 1pc Magneto gasket (for starter motor) : ....................$6.00

05) Wash + clean carburettor : .......................................$18.00

06) Engine holding bolt (long) ........................................... $8

07) Change Engine oil 1L ........................................$10.00

08) Change FS Mobil 1 Engine oil 1.2L(P200) ........................................$26.40

09) Change FS Mobil 1 Engine oil 1L(P180) .........................................$22.00

10) Denso spark plug (copper) .................................................. ....$6.50

11) NGK spark plug (copper) ..............................................$5.50

12) Respray engine block ..............................................$15

13) mj 115 ........................ $7.50

 

 

Brake, Clutch, Choke & Throttle

01) 1pc Rear Brake Shoe: .............................................. $18

02) 5pcs clutch spring (for starter motor): ........................$2.50

03) 5pcs bush for clutch (for starter motor): .....................$2.50

04) Clutch cable .................................................. ..........$16.50

05) Brake pedal .................................................. .............. $25

06) Brake Fluid + labour .................................... $12

07) Throttle cable ..............................$17

08) New set of choke……………………………………… ……….. $18

09) Clutch gasket .................. .................. 1pc $4 (need 2 pcs)

10) Centrifugal gasket ................................ $1 a pc

11) Cultch plate Kit set .................... $78 ( if I'm not wrong)

12) clutch lever...................$12

13) Clutch plate ....................... $19.50

14) Front brake pad ................. $23 a pair

15) master cylinder diaphrgm .............. $6

16) Pump kit master cylinder + top brake fluid + labor .... $45

 

 

Wheels, Tyres, Chain and Sprockets

01) Rubber cap for chain case: .......................................$1.00

02) Front & Rear sprocket + Chain : ................................. $75

03) Front sprocket only (without labor) .............................$12.50

04) Rear sprocket only (without labor) ..............................$25

05) Sprockets & Chain P200 (1 set) ........................ $136

06) IRC rear tyre (P200) .................................................$ 75

07) Battlax rear & front tyre P200 .............................$210

08) Seal puntured tyre ..................... $5

[09) Rubber Coupling Damper ............ $10.50

10) Duro Tyre Rear (P180) ...........................$65

11) Spray both rims (paint excluded) .................... $80 [1 spray can = $5, need 1 can per rim]

 

Electricals, Signals, Sensors and Horn

01) Signal light lens .................................................. .....$4.00

02) Whole signal light assembly (1 piece)............................$20.00

03) Bulb for fuel gauge/speedometer/tachometer (for ver 2) ..$2.00

04) Service starter motor assembly: ................................$15.00

05) Horn per pc .................................................. ................. $25

06) Head Light bulb ............................$8.50 [lookalike white light/P200] $7 [lookalike yellow]

07) Number Plate bulb ........................................ $2

08) Battery Dry Cell ...................$40.50

09) Temperature sensor .............. $12

10) starter motor........$60(second hand)$145(brand new)+labour fee $25

11) pigtail switch ..... $5

12) CDI assembly ..... $98

13) rotor assembly ... $125

14) stator assbly comp ... $90

15) control switch RH ..... $65

16) switch electrical control unit .... $124

17) coil with labor and gasket ... $129

 

Accessories

01) Crash bar .................................................. .............$30.00

02) Kit Grommet sidecover......................................... .......$2.50

03) Latest Givi Monorack for top box ..................................$70 (+$10 labor)

04) RH footrest.......................................... ...................... $36

05) LH footrest .................................................. .............. $32

06) Mirror per pcs .................................................. ............ $20

07) Handle bar .................................................. ................... $36

08) Pillon footrest per set .................................................. ..... $13

09) Shield muffler .................................................. ............... $28

10) Weld metal pc on side stand ............................................... $15

11) Spray foot step panel and pillion grab holders (paint excluded)..$20

12) Install aftermarket front & rear fenders ................................. $60

13) Blank key(without key cutting) ...................................$3.00

 

 

Fork, Main Stand, Side Stand and Exhaust

01) SVC the fork.............................................. ................ $40

02) Weld exhaust Pipe P180: .................................................. $15.00 [Depends on how bad it is]

03) Weld exhaust pipe P200 ......................................$22 [Depends on how bad it is]

04) Exhaust gasket ........................... $3.50

05) Top up fork oil ...................$4

06) Weld main stand wif extension + barckets ............. $30

07) Steering cone set($33) + Ball bearing 1 set of 39pcs (Top 19pcs below 20pcs)($4) + Labour($25)............................$62

08) Respray Exhaust ........................................$30

[FiddyCent]

give them bearings to reach KTM uh..den we got more ppl to join us for btwo..hahaha..can tumpang 5-ton home

 

haha. can can. i indent more so those who are too tired to ride back can put their bikes inside the tonner.

[mjbs64]

Hi everyone,

Need advice/help from seasoned pros here as it's time to change my chain/sprocket.

Is sinnob any good? $132 vs $136 (from UM) not much difference leh...

P200.

 

Thanks

 

 

Stock at Um inclusive labour ... hehehhe

 

Sinnob unless you can diy like bro atipo ... you save labor at UM around $20 .... which is a fair deal cos they are aware and familiar with sinnob already. Since Ah Wai and Ah Long have left UM, Ah Tek and Jackie have a good hands to assist you with the sinnob.

 

No Sacrifies No Victory ..... what you paid for Sinnob as alternative will give you a comfortable riding feeling especially your pillion be it your wife or fiancee or girlfriend ... cos Sinnob delivers with their trade marks ..... No Noise, No Vibration & No Heat Generated!! .. No here means Less or Lesser hehehehhehehe

 

Near to 30 sets on Singapore Road already ... all Pulsar and 1 Tiger!

 

check my profile album on the colour available to be on your Ride ..... and since if you have visits my profile do add your name on our SBT memebers list ...... kekekekekeke

 

CHEERS!!!

[alvinyansg]

Hi everyone,

Need advice/help from seasoned pros here as it's time to change my chain/sprocket.

Is sinnob any good? $132 vs $136 (from UM) not much difference leh...

P200.

 

Thanks

 

in summary 3 main point for sinnob

1) less heat

2) less vibration

3) less noise

[ORen]

Hi everyone,

Need advice/help from seasoned pros here as it's time to change my chain/sprocket.

Is sinnob any good? $132 vs $136 (from UM) not much difference leh...

P200.

 

Thanks

 

Sinnob is much better than the stock sprocket. Does wonders to the smoothness of the ride. Have been using it for many months now and I highly recommend it.

For the chain you can use the one that comes with the Sinnob package or buy another aftermarket one.

 

I think there are two things every pulsar rider should change on their bikes : the stock tyres and the sprocket to Sinnob.

[Fredd]

any1 for a rideup to mersing on thur or fri..lemme noe k..wun be goin highway..juz a simple ride look see look see the scenery

[revhappy]

Hey guys,

 

I have finally decided to sell off my pulsar after owning it for 1 year. Feel bad to sell it because it was so smooth and never gave me any trouble. But as I had mentioned earlier, I have been riding only pulsar all my life and want to try something different, while I am in Singapore and enjoy the highways here using some other bike as well, like a phantom or a comet 125.

No sacrifices no victory :cry:

[mjbs64]

I think there are two things every pulsar rider should change on their bikes : the stock tyres and the sprocket to Sinnob.

 

Wah .. I very scared lah .. later UM will bombard, cannon and gun me down upside down !!! ... kekekekekkekkeke

[Fredd]

y not get a bigger cc bike..like a s4 or even a cl2 bike and keep ur pulsar for normal commutin..u will enjoy e highways more .

 

Hey guys,

 

I have finally decided to sell off my pulsar after owning it for 1 year. Feel bad to sell it because it was so smooth and never gave me any trouble. But as I had mentioned earlier, I have been riding only pulsar all my life and want to try something different, while I am in Singapore and enjoy the highways here using some other bike as well, like a phantom or a comet 125.

No sacrifices no victory :cry:

[mjbs64]

Hey guys,

 

I have finally decided to sell off my pulsar after owning it for 1 year. Feel bad to sell it because it was so smooth and never gave me any trouble. But as I had mentioned earlier, I have been riding only pulsar all my life and want to try something different, while I am in Singapore and enjoy the highways here using some other bike as well, like a phantom or a comet 125.

No sacrifices no victory :cry:

 

Cheers to you bro!! ....

 

Like in Transformers, ...... Autobot Jazz motto:

 

"Do it with style, or don't bother doing it".

 

kekekekee

 

and truely yes like his motto .. he died with style!! ... thanks to STUPID micheal bay!!

 

cheers again!!

Edited April 25, 2011 by mjbs64

[revhappy]

y not get a bigger cc bike..like a s4 or even a cl2 bike and keep ur pulsar for normal commutin..u will enjoy e highways more .

 

Haha, cant keep 2 bikes bro. Its like keeping 2 wives . Also, my CFO is more strict than your CFO bro

[Lumberjack]

thanks for all your replies...

[Brandonwang]

:):):)

[revhappy]

thanks for all your replies...

 

Yes bro. Sinnob v/s stock, there is no debate at all it has to sinnob considering that for same price you are getting much better quality and also looks also. No sacrifices here only victory

Only sacrifices is our MJ bro's time and efforts

Edited April 25, 2011 by revhappy

[ORen]

Hey guys,

 

I have finally decided to sell off my pulsar after owning it for 1 year. Feel bad to sell it because it was so smooth and never gave me any trouble. But as I had mentioned earlier, I have been riding only pulsar all my life and want to try something different, while I am in Singapore and enjoy the highways here using some other bike as well, like a phantom or a comet 125.

No sacrifices no victory :cry:

 

Once a pulsarian, always a pulsarian !

 

(but trading a pulsar for a phantom or a 125.....really ?)

 

Oh, and make sure you introduce the buyer to us !

[revhappy]

Once a pulsarian, always a pulsarian !

 

(but trading a pulsar for a phantom or a 125.....really ?)

 

Oh, and make sure you introduce the buyer to us !

 

Haha. Yeah, its just the need for a different style of ride. Try something different when I have the chance. A cruiser like phantom or a comet(in between cruiser and naked, god knows what it is called ) or even a sports bike with a fairing like CBR 150.

 

Consider this if I take a photo of me with the pulsar and post it on facebook, my friends in India wont even believe I am in Singapore Not that I want to impress people but just while I am here try out other bikes just for the experience of it. I may hate them and come back for the pulsar, for all you know,hehehe

[mjbs64]

Haha. Yeah, its just the need for a different style of ride. Try something different when I have the chance. A cruiser like phantom or a comet(in between cruiser and naked, god knows what it is called ) or even a sports bike with a fairing like CBR 150.

 

Consider this if I take a photo of me with the pulsar and post it on facebook, my friends in India wont even believe I am in Singapore Not that I want to impress people but just while I am here try out other bikes just for the experience of it. I may hate them and come back for the pulsar, for all you know,hehehe

 

alamak bro .. seriouslah ... your reason to change bike so unjustified lah !! kekeeke ..

how to get impressed if you posted solo pic only on your fb... hheeee

solo pic to them is normal lah .. but

if you send pictures of you riding with us together with 15 - 20 bikes of pulsars .. for sure they will jaw drop lah ..

cos they will be surprised to know how this indian bike can get singaporeans of multy races get together as ...

ONE SBT AND ONE SINGAPORE!! .........hehehehe ..

 

 

and seruiusly .. you have ride for 1 year with pulsar but with us only ONCE lah we sat together for teh tarik!! ... that's why they don't impressed ! ... kakakakakakkka

 

cheers!

[speedaddict]

Anyone looking for a full time job? let me know.

[haktek]

Anyone looking for a full time job? let me know.

 

what job.... jangan b l o w sudah hehehe

[speedaddict]

operations executive.. work in my school.. must be garang one..

[Brandonwang]

Anyone looking for a full time job? let me know.

 

U join recruit services? Kelly services?

[Fredd]

how's e pay bro and wads e requirement besides bein fierce? hahaha..my bike fierce can? jokes aside..where's ur sch? feel like changing jobs to breathe new air

 

operations executive.. work in my school.. must be garang one..

[spaiduhz]

operations executive.. work in my school.. must be garang one..

 

Allowed to get physical?

[haktek]

Allowed to get physical?

 

cant u read... its a school... getting physical will get u in trouble... you will onely able to use vocal power... then the rest is up to the school...

[speedaddict]

paywise im not too sure.. The school located in Pasir Ris.. Haha cant get physical.

But you must be the guy who makes all students heart beat fast when they see u, checking themselves to make sure they have the proper attire or etc.

Not skipping classes etc. Must jaga detention.

 

 

That depends if the current OE is going out or not. If he is then need to find replacement..